Lists and describes the available columns for monitoring QoS bounds and violations in network interface, circuit, and queue tables.
This table lists the available column options to display numeric values of the QoS bound calculations. For information on QoS values as they relate to VPNs, refer to Simulate VPN.
| To view |
Show this column in Interfaces, Circuits, or Interface queues table |
|---|---|
| Measured Traffic |
|
| Maximum capacity before a QoS bound is violated under normal operations |
QoS bound meas |
| QoS bound as a percentage of total interface capacity |
QoS bound meas (%) |
| QoS violations under normal operations; if the number is positive, there is a violation |
QoS violation meas |
| QoS violation as a percent of the total interface capacity |
QoS violation meas (%) |
| Simulated Traffic |
|
| Maximum capacity before a QoS bound is violated under normal operations |
QoS bound sim |
| QoS bound as a percentage of total interface capacity |
QoS bound sim (%) |
| QoS violations under normal operations; if the number is positive, there is a violation |
QoS violation sim |
| QoS violation as a percent of the total interface capacity |
QoS violation sim (%) |
| Worst-Case Traffic |
|
| Maximum capacity before a QoS bound is violated under worst-case operations |
WC QoS bound |
| WC QoS bound as a percentage of total interface capacity |
WC QoS bound (%) |
| QoS violations under worst-case operations; if the number is positive, there is a violation |
WC QoS violation |
| WC QoS violation as a percent of the total interface capacity |
WC QoS violation (%) |
| Service class causing the worst-case utilization |
WC service class |