Describes IGP routing protocol simulation, covering IGP process ID management, OSPF and IS-IS simulation techniques, EIGRP simulation, multipath scenarios, simulation configuration, and multi-topology routing with task-based configuration procedures.
IGP process ID
Describes an identifier used to differentiate between multiple instances of the same IGP running on a router.
OSPF and IS-IS differences
Describes the differences between OSPF and IS-IS routing protocol simulations.
EIGRP
Describes the Enhanced Interior Gateway Routing Protocol and its metric calculation method.
Simulate IGP multipath
Explains how to configure the maximum number of ECMP paths for IGP multipath simulation in network planning.
Exclude ABR nodes
Explains how to configure ABR node exclusions to prevent specific nodes from being used while entering or exiting the domain.
Configure IGP simulation
Describes how to configure IGP simulation settings to control route redistribution across IGP processes and manage ECMP path tie breakers.
Multi-topology routing
Describes how Cisco Crosswork Planning simulates multi-topology routing with specific rules for interface assignment and routing restrictions.