Cisco Crosswork Planning Design 7.2.x User Guide
Is this content helpful?
Thank you for your feedback. Your response has been recorded.
AI responses are currently only available to logged in users. Log in
Only ask questions about this document. To ask questions about this product as a whole, go to Technical Documentation .
Suggestions
Sorry, we couldn't generate a response for this query.
Cisco Crosswork Planning Design 7.2.x User Guide
Updated: August 14, 2026
Want to summarize with AI?
Log inLists the available options for configuring Setup BW reset for modified LSPs in the Advanced tab after optimization.
The Post optimization section in the Advanced tab (refer to Figure 1) lets you identify how to reset the Setup BW for modified LSPs.
The available options are:
Reset Setup BW to 0.
Reset Setup BW to be the same as the resulting RSVPTEOpt::BWReq value.
Keep the Setup BW the same.
Need help?
(Requires a Cisco Service Contract)
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.