Cisco Crosswork Planning Design 7.2.x User Guide

PDF

Cisco Crosswork Planning Design 7.2.x User Guide

Apply patch files

Updated: August 14, 2026

Want to summarize with AI?

Log in

Explains how to apply patch files to plan files to update or modify their contents as needed.

Use this task to make targeted changes or corrections to existing plan files using patch files.

You may need to update plan files with patch files to fix errors, add enhancements, or synchronize the design with new requirements.

Procedure

1.

Open the plan file in the Network Design page. For more information, refer to Open plan files.
2.

From the toolbar, choose Actions > Tools > Patches > Apply patch.

3.

Click Browse to browse to the location where the patch file resides. Choose from these options:

  • From user space: Choose this option to select the patch file saved in your user space.

  • From local: Choose this option to select the patch files saved in your local system. Click Browse, choose the patch file located in your local system, and click Import.

    Note that the patch file is imported into the user space as well.
4.

Specify whether to stop or continue in case of error.
5.

To verify the patch file’s contents before applying it, click the View details link. After viewing the patch, click Close. Use the Edit patch button to edit the patch file.
6.

Click Run in the Apply Patch page.
The patch file is applied to the selected plan file, updating its contents as specified.