Cisco Crosswork Planning Design 7.2.x User Guide

PDF

Cisco Crosswork Planning Design 7.2.x User Guide

Edit an add-on

Updated: August 14, 2026

Want to summarize with AI?

Log in

Guides you through modifying an existing add-on, including updating the add-on file, adjusting user interface controls and properties, previewing changes, and saving the updated configuration in the management interface.

This topic describes how to modify user interface or input controls of an existing add-on.

Procedure

  1. Open the Manage Add-ons page using one of these options:

    • On the Network Design page, click Manage add-ons at the top right.

    • From the toolbar, select Actions > Add-ons > Manage add-ons.

  2. To use a different add-on file, select the add-on you want to edit and click More actions > Update add-on file. Then, upload the new add-on file.

  3. To modify any UI controls, select the add-on you want to edit and click Edit.

    1. Update UI controls, default values, or other UI-related properties as needed. For descriptions of all the fields, refer to Add-on controls.
    2. Ensure that each configured field meets the minimum required settings. The fields must display . If you have not met the requirements, an alert () appears. In this situation, click and specify the required fields.
    3. Click Preview to preview the add-on configuration. Verify all the details you configured.
    4. When you are satisfied with the changes, click Back to editor at the top to go back to the Form Builder page.
    5. Click Save add-on to save the changes.