Cisco Crosswork Planning Design 7.2.x User Guide

Exclude ABR nodes

Updated: August 14, 2026

Want to summarize with AI?

Explains how to configure ABR node exclusions to prevent specific nodes from being used while entering or exiting the domain.

Use this task when you need to exclude ABR nodes while entering or exiting the domain to optimize network performance or maintain routing preferences.

Procedure

	1.	Open the plan file (refer to Open plan files). It opens in the Network Design page.
	2.	From the toolbar, choose Actions > Edit > Node ABR exclusions. The Node ABR exclusions page opens. The Node column displays the A and Z end. The Exclude node column displays the node that is excluded.
	3.	To add an IGP ABR node exclusion: Click . In the Node and Exclude node sections, specify the details of the node and the node that needs to be excluded, respectively. Save the changes.
	4.	To delete an IGP ABR node exclusion: Select the row that you want to delete. Click .

The IGP ABR node exclusions are configured according to your specifications.

Need help?

Open a support case

(Requires a Cisco Service Contract)

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.