Cisco Crosswork Planning Design 7.2.x User Guide

Optimize Segment Routing

Updated: August 14, 2026

Explains SR-TE and bandwidth optimization methods and reporting for advanced segment routing performance and traffic engineering.

SR LSP optimization tools

Outlines SR LSP optimization tools that minimize metrics and hops for SR LSPs and set routes based on traffic engineering, alongside bandwidth optimization for congestion mitigation and post-failure reoptimization.

SR-TE optimization

Explains how SR-TE optimizations enable advanced traffic engineering, flexible path calculation, and network reliability for modern IP and MPLS infrastructures.

SR-TE bandwidth optimizations

Describes how SR-TE bandwidth optimization manages network congestion by rerouting demands and using efficient label-switched paths under defined constraints.

Need help?

Open a support case

(Requires a Cisco Service Contract)

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.