Cisco Ultra-Reliable Wireless Backhaul Standalone, Software Configuration Guide, Release 26.1.x

PDF

Cisco Ultra-Reliable Wireless Backhaul Standalone, Software Configuration Guide, Release 26.1.x

Configure maximum number of spatial streams index from CLI

Updated: April 10, 2026

Want to summarize with AI?

Configure the maximum number of spatial streams (NSS) index using CLI commands.

Configure the maximum number of spatial streams (NSS) index to optimize wireless performance based on device capabilities and antenna configuration.

The NSS index determines the maximum number of spatial streams that can be used for wireless communication. This setting can be configured manually with specific values or set to AUTO for automatic configuration.

Procedure

Configure the maximum number of spatial streams index using the following command:

Example:

Device# configure dot11radio <interface> spatial-stream <maxnss>

Set maximum spatial stream number in integer or string AUTO. For AUTO, the background process automatically configures the maxnss.

Valid values range from 1 to 4 or AUTO.

Note

Catalyst IW9165 supports up to two spatial streams and Catalyst IW9167 supports up to four spatial streams. The maximum number of spatial streams configured must be same or less than the number of antennas enabled.

Need help?

Open a support case

(Requires a Cisco Service Contract)

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.