Provides the command to verify the cleared IPv6 gateway and DNS server addresses configuration on the AP.
Verify the cleared IPv6 gateway and DNS server addresses configuration on the AP using the show command.
To verify the cleared IPv6 gateway and DNS server addresses configuration on the AP, use this show command:
Device#show ipv6
IPv6: Enabled
Router Advertisment auto-configuration: Disabled
Static IPv6 config:
Address: fc00::1234:5678:xxxx:def/64
Currently assigned addresses:
fc00::1234:5678:xxxx:def/64 global
fe80::4236:5aff:xxxx:168/64 link
While adapting services to work with IPv6, such as TFTP, you must consider that link-local IP addresses might require network interface specifications.