Configure IW Service mode to enable cloud management or offline configuration.
This task sets up the device management mode to either connect to cloud services for centralized management or configure it locally for offline operation.
IW Service is the cloud management portal, and the device is connected to the Cloud-Managed through the cloud network. In offline mode the device is configured in local mode using CLI and GUI, and it is not connected to the cloud.
When the device is configured in offline mode, choose following options:
-
Configure the device manually using CLI and GUI.
-
Configure the device on IW Service cloud service and select the configuration file exported from IW Service and upload the configuration file using upload configuration button at the end of IW Service management page.
Procedure
To activate or deactivate IW Service configuration capability, use this CLI command: Example:Cloud-Managed - To set up IW Service mode to Cloud-Managed. The device can be managed from IW Service cloud server (if it is connected to the network). Offline - To set up IW Service mode to offline. The device is disconnected from IW Service and must be manually configured using the CLI, or offline configurator interface. |