Details the configuration processes for Cisco Ultra-Reliable Wireless Backhaul operation modes, including command-line interface setup, graphical user interface access, and Internet of Things operational deployment settings.
URWB operation mode
Describes the configuration of URWB operation mode on Catalyst Industrial Wireless access points.
Identify Software Images from CLI
Provides CLI commands to determine which software image is running on the access point and check the operating mode.
Reset button settings
Lists the reset actions performed in URWB mode when the LED turns to blinking red after the boot loader gets the reset signal.
Configure image conversion
Configure a Catalyst IW9167E access point to convert between Wi-Fi mode (CAPWAP AP), URWB mode, and WGB/uWGB mode.
Access the GUI
Configure access to the Web UI (Web User Interface) for the IW9167E or IW9165 device.
Verify URWB Catalyst IW9167E configuration using GUI
Provides visual confirmation of the Catalyst IW9167E access point settings for Ultra-Reliable Wireless Backhaul. This reference assists users in validating their configuration through the graphical user interface.
Commit CLI configuration
Configure the device to save current configuration settings to memory and reload the device for the changes to take effect.
Configure IW Service Cloud-Managed and Offline Mode using CLI
Configure IW Service mode to enable cloud management or offline configuration.
Configure password after first login using CLI
Configure new login credentials using CLI after the device switches to offline mode following initial login.
Configure IW Service using GUI
Describes the configuration of system settings through the graphical user interface. This method provides a visual approach for managing system setup and operational parameters.