Provides CLI command to validate radio channel and bandwidth configuration parameters on wireless devices.
To validate radio channel and bandwidth, use the show command to display configuration parameters and verify operational status.
Device# show dot11Radio 1 config
Interface: enabled
Mode: fixed infrastructure
Frequency: 5860 MHz
Channel: 172
Channel width: 10 MHz
Antenna number: 2
TX power level: 8
TX power: 2 dBm
Antenna gain: unselected
Maximum tx mcs: 9
High-efficiency: disabled
Maximum tx nss: 2
RTS protection: disabled
guard-interval: 800 ns
ampdu max length: 255
distance: 3000 m
The ampdu Tx
priority 0: enabled
priority 1: enabled
priority 2: enabled
priority 3: enabled
priority 4: enabled
priority 5: enabled
priority 6: disabled
priority 7: disabled
Enhanced Distributed Channel Access (EDCA) configuration
vo: aifs=1 cw_min=2 cw_max=3 txop=15
vi: aifs=1 cw_min=3 cw_max=4 txop=31
be: aifs=3 cw_min=4 cw_max=6 txop=31
bk: aifs=7 cw_min=3 cw_max=4 txop=0
Passphrase: 33322f268bd38d6307fb52ffec9f515fe15303ac62ed375b397716bd810d511c
AES encryption: disabled
AES key-control: disabled
Key rotation: disabled
Key rotation timeout: 0(second)
DFS region: E
DFS radar role: auto
Radar detected: 0
Indoor deployment: disable
Rx-SOP Threshold: 0 dBm(AUTO)
Max packet retries: 32