Cisco Ultra-Reliable Wireless Backhaul Standalone, Software Configuration Guide, Release 26.1.x

PDF

URWB Telemetry Protocol

Updated: April 10, 2026

Guides users through configuring Ultra Reliable Wireless Broadband telemetry protocols using command-line interface methods, including live configuration and Global Navigation Satellite System telemetry setup.

URWB telemetry protocol

Configure the URWB Telemetry Protocol to enable custom external monitoring of real-time wireless performance through structured UDP packets.

Configure URWB Telemetry Protocol using CLI

Configures the URWB telemetry protocol to transmit raw UDP data to a specified receiver. This procedure establishes the server destination and enables the export functionality for telemetry data.

Live Configuration of URWB Telemetry Protocol using CLI

Configures live telemetry settings using the live modifier to ensure immediate effect on the current configuration. This procedure enables the telemetry export and verifies the configuration status.

Configure GNSS Telemetry Protocol using CLI

Enables or disables the GNSS telemetry protocol on the device. This procedure also provides the command to verify the current status of the GNSS telemetry configuration.

Need help?

Open a support case

(Requires a Cisco Service Contract)

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.