Provides the command to verify the static IPv6 address with eui-64, gateway, and DNS server address on the AP.
To verify the static IPv6 address with eui-64, gateway, and DNS server address on the AP, use this show command:
Device#show ipv6
IPv6: Enabled
Router Advertisment auto-configuration: Disabled
Static IPv6 config:
Address: fc00::4236:5aff:xxxx:168/64
Gateway: fc00::1
DNS1: 2001:4860:4860::xxxx
DNS2: 2001:4860:4860::xxxx
Currently assigned addresses:
fc00::4236:5aff:xxxx:168/64 global
fe80::4236:5aff:xxxx:168/64 link