Lists the radio mode configurations for wireless interfaces operating in Fixed infrastructure or Fluidity mode.
The wireless interfaces are configured to operate in a specific mode, or you can disable it. Once you configure the Radio mode, the device starts working as a Fluidity or Fixed infrastructure.
| Radio Role |
Radio Mode |
Description |
|---|---|---|
| Fixed Infrastructure |
Fixed Fluidmax primary Fluidmax secondary |
P2P mode (point to point) P2MP (point to multipoint) mode (Fluidmax) and P2MP P2MP mode (Fluidmax) and P2MP |
| Mobility AP |
Fluidity |
Mobility mode |
| Mobility Client |
Fluidity |
Mobility mode |
| Radio 1 / Radio 2 |
Fixed Infrastructure |
Fluidity |
|---|---|---|
| Fixed Infrastructure |
Fluidity disabled |
Fluidity enabled |
| Fluidity |
Fluidity enabled |
Fluidity enabled |
| Radio 1 / Radio 2 |
Fixed Infrastructure / Mesh |
Mobility AP |
Mobility client |
|---|---|---|---|
| Fixed Infrastructure / Mesh |
ME/MP relay, P2MP (mesh) |
Yes, trailer use case (Mining trailer) |
Supported but no specific use case |
| Mobility AP |
Yes, trailer use case (Mining trailer) |
Standard Fluidity (multiple clients on each radio) |
Not supported, use V2V or Fixed + AP |
| Mobility client |
Supported but no specific use case |
Not supported, use V2V or Fixed + AP |
Standard Fluidity (multiple clients on each radio) |