Configure the operating channel and bandwidth for wireless radio SETTINGS through the graphical user interface.
This task allows you to set the frequency range and channel width for wireless radio operations to ensure optimal network performance.
Use this procedure when you need to configure wireless radio SETTINGS for your network device. This configuration affects the radio's operating parameters and bandwidth allocation.
Procedure
| 1. | Choose GENERAL SETTINGS > wireless radio and go to Radio 1 Settings: |
|
| 2. | From the Role drop-down list, select Fixed or Fluidity. |
|
| 3. | From the Frequency (MHz) drop-down list, select the frequency range. See Table 1 for a list of valid frequencies. |
|
| 4. | From the Channel Width (MHz) drop-down list, select 10 MHz. |
|
| 5. | Click Save. |
|
| 6. | (Optional) Choose MANAGEMENT SETTINGS > status. This page displays the status of radio channel, bandwidth configuration, and specific information of each wireless interface. |