Cisco Ultra-Reliable Wireless Backhaul Standalone, Software Configuration Guide, Release 26.1.x

PDF

Cisco Ultra-Reliable Wireless Backhaul Standalone, Software Configuration Guide, Release 26.1.x

Verify NAT translations using CLI

Updated: April 10, 2026

Want to summarize with AI?

Log in

Provides the CLI command output for verifying NAT translations on a device.

The show ip NAT translations command displays all the NAT translations.

Device# show ip nat translations

NAT: enabled 

Port NAT Translations 
---------------------

TCP Translations 
(192.168.50.4, 4000, 192.168.50.1, 34200) => (10.115.11.157, 4443, 10.115.11.250, 51010)
(10.115.11.250, 51010, 10.115.11.157, 4443) => (192.168.50.1, 34200, 192.168.50.4, 4000)

UDP Translations 
None

Source NAT Translations 
-----------------------
TCP Translations 
(192.168.50.4, 51178, 10.115.11.250, 4000) => (10.115.11.157, 20292, 10.115.11.250, 4000)
(10.115.11.250, 4000, 10.115.11.157, 20292) => (10.115.11.250, 4000, 192.168.50.4, 51178)

UDP Translations 
(10.115.11.250, 3000, 10.115.11.157, 22068) => (10.115.11.250, 3000, 192.168.50.4, 38318)
(192.168.50.4, 38318, 10.115.11.250, 3000) => (10.115.11.157, 22068, 10.115.11.250, 3000)