Provides verification command for static IPv6 address configuration without eui-64, gateway, and DNS server address on the AP.
To verify the static IPv6 address without eui-64, gateway, and DNS server address on the AP, use the show command.
Device#show ipv6
IPv6: Enabled
Router Advertisment auto-configuration: Disabled
Static IPv6 config:
Address: fc00::1234:5678:xxxx:def/64
Gateway: fc00::1
DNS1: 2001:4860:4860::xxxx
DNS2: 2001:4860:4860::xxxx
Currently assigned addresses:
fc00::1234:5678:xxxx:def/64 global
fe80::4236:5aff:xxxx:168/64 link