APIC - L4-L7 Services - Function Profile Operations

This chapter contains the following sections:

Add ACL Entry To APIC Function Profile

Summary
Add an ACL entry to a function profile.
Description
This task adds a ACL entry to a function profile on the APIC controller.
Inputs
Input Description Mappable To Type Mandatory
Function Profile Name Select Function profile to add an ACL Entry.​ Apic​Tenant​Function​Profile​Identity
ACL List Name Enter an ACL Entry List name.​ gen_​text_​input Y
ACL Entry Name Enter an ACL Entry name.​ The name cannot contain an underscore (_​).​ gen_​text_​input Y
Protocol Select a protocol.​ Valid protocols are IP, TCP, UDP or ICMP.​ Default value is IP.​ gen_​text_​input
Type Select Type of Network.​ Default Network Type is IP Address.​ gen_​text_​input
Source Network Object Select a source network Object.​ Apic​Tenant​L4L7Function​Profile​Network​Object​Identity
Source Network Object Group Select a source network Object Group.​ Apic​Tenant​L4L7Function​Profile​Network​Object​Group​Identity
Destination Network Object Select a Destination network Object.​ Apic​Tenant​L4L7Function​Profile​Network​Object​Identity
Destination Network Object Group Select a destination network Object Group.​ Apic​Tenant​L4L7Function​Profile​Network​Object​Group​Identity
Source Any Check to enable Any Source.​ Default value is checked.​ gen_​text_​input
Source Address Enter Source IP Address, IP Address Range or IP Address Subnet Mask.​ gen_​text_​input
Destination Any Check to enable Any Destination.​ Default value is checked.​ gen_​text_​input
Destination Address Enter Destination IP Address, IP Address Range or IP Address Subnet Mask.​ gen_​text_​input
Action Select an action.​ Specify either permit or deny.​ The default value is 'deny'.​ gen_​text_​input
Order Enter Order of Entry.​ gen_​text_​input
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​NAME Tenant Name on which the selected operation was performed gen_​text_​input
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
FUNCTION_​PROFILE_​GROUP Tenant Function Profile Group gen_​text_​input
FUNCTION_​PROFILE_​GROUP_​IDENTITY Tenant Function Profile Group Identity Apic​Tenant​Function​Profile​Group​Identity
FUNCTION_​PROFILE_​ACL_​IDENTITY Tenant Function Profile ACL Identity Apic​Tenant​L4L7Function​Profile​Acl​Identity

Add APIC Bridge Group Interface To Function Profile

Summary
Add bridge group interface to a function profile.
Description
This task adds a bridge group interface to a function profile on the APIC controller.
Inputs
Input Description Mappable To Type Mandatory
Function Profile Name Select Function profile to add Bridge Group Interface.​ Apic​Tenant​Function​Profile​Identity Y
Bridge Group ID Enter Bridge Group ID.​ Value is an integer between 1 and 100.​ gen_​text_​input Y
IPv4 Address Value Enter IPv4 Address Value.​ For example: 10.​10.​10.​10/11.​11.​11.​11.​ gen_​text_​input Y
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​NAME Tenant Name on which the selected operation was performed gen_​text_​input
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
FUNCTION_​PROFILE_​GROUP Tenant Function Profile Group gen_​text_​input
FUNCTION_​PROFILE_​GROUP_​IDENTITY Tenant Function Profile Group Identity Apic​Tenant​Function​Profile​Group​Identity
FUNCTION_​PROFILE_​IDENTITY Tenant Function Profile Identity Apic​Tenant​Function​Profile​Identity
FUNCTION_​PROFILE_​BRIDGE_​GROUP_​INTERFACE_​IDENTITY Tenant Function Profile Bridge Group Interface Identity Apic​Tenant​L4L7Function​Profile​Bridge​Group​Interface​Identity

Add Function Config Parameters To APIC Function Profile

Summary
Add function config parameters to a function profile.
Description
This task adds function configuration parameters to a function profile on the APIC controller.
Inputs
Input Description Mappable To Type Mandatory
Function Profile Name Select Function profile to add Function Config Parameters.​ Apic​Tenant​Function​Profile​Identity Y
External Interface Select External Interface to configure with Function profile.​ Apic​Tenant​L4L7Function​Profile​Interface​Identity Y
Internal Interface Select Internal Interface to configure with Function profile.​ Apic​Tenant​L4L7Function​Profile​Interface​Identity Y
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​NAME Tenant Name on which the selected operation was performed gen_​text_​input
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
FUNCTION_​PROFILE_​GROUP Tenant Function Profile Group gen_​text_​input
FUNCTION_​PROFILE_​GROUP_​IDENTITY Tenant Function Profile Group Identity Apic​Tenant​Function​Profile​Group​Identity
FUNCTION_​PROFILE_​IDENTITY Tenant Function Profile Identity Apic​Tenant​Function​Profile​Identity
FUNCTION_​PROFILE_​EXTERNAL_​INTERFACE_​IDENTITY Tenant Function Profile External Interface Identity Apic​Tenant​L4L7Function​Profile​Interface​Identity
FUNCTION_​PROFILE_​INTERNAL_​INTERFACE_​IDENTITY Tenant Function Profile Internal Interface Identity Apic​Tenant​L4L7Function​Profile​Interface​Identity

Add Interface To APIC Function Profile

Summary
Add an interface to a function profile.
Description
This task adds an interface to a function profile on the APIC controller.
Inputs
Input Description Mappable To Type Mandatory
Function Profile Name Select Function profile to add Interface.​ Apic​Tenant​Function​Profile​Identity Y
Interface Name Enter an interface name.​ gen_​text_​input Y
Type Select Interface Type: External, Internal, or none.​ gen_​text_​input
IPv4 Address IPv4 Address Value gen_​text_​input
Security Level Security Level Value gen_​text_​input
Bridge Group ID Select Bridge Group ID.​ Apic​Tenant​L4L7Function​Profile​Bridge​Group​Interface​Identity
Inbound ACL Select Inbound ACL.​ Apic​Tenant​L4L7Function​Profile​Acl​Identity
Outbound ACL Select Outbound ACL.​ Apic​Tenant​L4L7Function​Profile​Acl​Identity
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​NAME Tenant Name on which the selected operation was performed gen_​text_​input
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
FUNCTION_​PROFILE_​GROUP Tenant Function Profile Group gen_​text_​input
FUNCTION_​PROFILE_​GROUP_​IDENTITY Tenant Function Profile Group Identity Apic​Tenant​Function​Profile​Group​Identity
FUNCTION_​PROFILE_​INTERFACE_​IDENTITY Tenant Function Profile Interface Identity Apic​Tenant​L4L7Function​Profile​Interface​Identity
FUNCTION_​PROFILE_​BRIDGE_​GROUP_​INTERFACE_​IDENTITY Tenant Function Profile Bridge Group Interface Identity Apic​Tenant​L4L7Function​Profile​Bridge​Group​Interface​Identity

Add Network Object Group Parameters To APIC Function Profile

Summary
Description
Inputs
Input Description Mappable To Type Mandatory
Function Profile Name Select Function Profile name to add Network Object Group Parameters.​ Apic​Tenant​Function​Profile​Identity Y
Network Object Group Name Enter a Network Object Group name.​ gen_​text_​input Y
Description Enter a description for the Network Object Group.​ Up to 128 characters are allowed.​ gen_​text_​input
Network Object Group Type Select a Network Object Group Type.​ Default type is Host IP Address.​ gen_​text_​input
Host IP Address Enter Host IP Address as IPv4 (for example, 10.​10.​10.​10) or IPv6 (X:X:X:X::X).​ gen_​text_​input
Network Address Enter a network address as IPv4/net​Mask (for example, 10.​10.​10.​0/255.​255.​255.​0) or IPv6/prefix (X:X:X:X::X/(0-128)) gen_​text_​input
Network Object Name Enter a network Object name.​ Apic​Tenant​L4L7Function​Profile​Network​Object​Identity
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​NAME Tenant Name on which the selected operation was performed gen_​text_​input
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
FUNCTION_​PROFILE_​GROUP Tenant Function Profile Group gen_​text_​input
FUNCTION_​PROFILE_​GROUP_​IDENTITY Tenant Function Profile Group Identity Apic​Tenant​Function​Profile​Group​Identity
FUNCTION_​PROFILE_​IDENTITY Tenant Function Profile Identity Apic​Tenant​Function​Profile​Identity
FUNCTION_​PROFILE_​NETWORK_​OBJECT_​GROUP_​IDENTITY Tenant Function Profile Network Object Group Identity Apic​Tenant​L4L7Function​Profile​Network​Object​Group​Identity

Add Network Object Parameters To APIC Function Profile

Summary
Add network object parameters to a function profile.
Description
This task adds a network object parameters to a function profile on the APIC controller.
Inputs
Input Description Mappable To Type Mandatory
Function Profile Name Select Function profile to add Network Object Parameters.​ Apic​Tenant​Function​Profile​Identity Y
Network Object Name Enter a network object Parameter name.​ gen_​text_​input Y
Network Object Type Select a network Object Type.​ Default Type is FQDN.​ gen_​text_​input
FQDN Enter Fully Qualified Domain Name.​ gen_​text_​input
Host IP Address Enter Host IP Address.​ gen_​text_​input
IP Address Range Enter IP Address Range.​ For example: 0.​0.​0.​10-10.​10.​10.​20.​ gen_​text_​input
Network IP Address Enter a network IP Address.​ gen_​text_​input
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​NAME Tenant Name on which the selected operation was performed gen_​text_​input
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
FUNCTION_​PROFILE_​GROUP Tenant Function Profile Group gen_​text_​input
FUNCTION_​PROFILE_​GROUP_​IDENTITY Tenant Function Profile Group Identity Apic​Tenant​Function​Profile​Group​Identity
FUNCTION_​PROFILE_​IDENTITY Tenant Function Profile Identity Apic​Tenant​Function​Profile​Identity
FUNCTION_​PROFILE_​NETWORK_​OBJECT_​IDENTITY Tenant Function Profile Network Object Identity Apic​Tenant​L4L7Function​Profile​Network​Object​Identity

Add Service Object Parameters To APIC Function Profile

Summary
This task adds Service Object Parameters To APIC Function Profile
Description
This task allows user to add Service Object Parameters to APIC Function Profile on the APIC controller.
Inputs
Input Description Mappable To Type Mandatory
Function Profile Name Select Function profile to add Service Object Parameters.​ Apic​Tenant​Function​Profile​Identity Y
Service Object Name Enter Service Object Parameters name.​ gen_​text_​input Y
Description Enter a description for Service Object Parameters.​ Up to 128 characters are allowed.​ gen_​text_​input
Protocol Type Enter a protocol type.​ gen_​text_​input
Service Object Type Select Service Object Type as ICMP, ICMP6, TCP or UDP.​ Default type is ICMP.​ gen_​text_​input
ICMP Code Enter Internet Control Message Protocol (ICMP) Code.​ gen_​text_​input
ICMP Type Enter Internet Control Message Protocol (ICMP) Type.​ gen_​text_​input
ICMP6 Code Enter Internet Control Message Protocol (ICMP6) Code.​ gen_​text_​input
ICMP6 Type Enter Internet Control Message Protocol (ICMP6) Type.​ gen_​text_​input
TCP Destination High Port Enter TCP Destination High Port range between 0 and 65535.​ gen_​text_​input
TCP Destination Low Port Enter TCP Destination Low Port range between 0 and 65535.​ gen_​text_​input
TCP Destination Operator Enter TCP Destination Operator.​ gen_​text_​input
TCP Source High Port Enter TCP Source High Port range between 0 and 65535.​ gen_​text_​input
TCP Source Low Port Enter TCP Source Low Port range between 0 and 65535.​ gen_​text_​input
TCP Source Operator Enter TCP Source Operator.​ gen_​text_​input
UDP Destination High Port Enter UDP Destination High Port range between 0 and 65535.​ gen_​text_​input
UDP Destination Low Port Enter UDP Destination Low Port range between 0 and 65535.​ gen_​text_​input
UDP Destination Operator Enter UDP Destination Operator.​ gen_​text_​input
UDP Source High Port Enter UDP Source High Port range between 0 and 65535.​ gen_​text_​input
UDP Source Low Port Enter UDP Source Low Port range between 0 and 65535.​ gen_​text_​input
UDP Source Operator Enter UDP Source Operator.​ gen_​text_​input
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​NAME Tenant Name on which the selected operation was performed gen_​text_​input
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
FUNCTION_​PROFILE_​GROUP Tenant Function Profile Group gen_​text_​input
FUNCTION_​PROFILE_​GROUP_​IDENTITY Tenant Function Profile Group Identity Apic​Tenant​Function​Profile​Group​Identity
FUNCTION_​PROFILE_​IDENTITY Tenant Function Profile Identity Apic​Tenant​Function​Profile​Identity
FUNCTION_​PROFILE_​SERVICE_​OBJECT_​IDENTITY Tenant Function Profile Service Object Identity Apic​Tenant​L4L7Function​Profile​Service​Object​Identity

Add Static Route To Interface On APIC Function Profile

Summary
Add a static route to an interface on an APIC function profile.
Description
This task adds a static route to an interface on an APIC function profile.
Inputs
Input Description Mappable To Type Mandatory
Interface Name Select Interface On an APIC Function profile to add Static Route.​ Apic​Tenant​L4L7Function​Profile​Interface​Identity Y
Type Select an IP Type as IPv4 or IPv6.​ Default Type is IPv4.​ gen_​text_​input
Gateway Address Enter gateway address as an IPv4 address.​ gen_​text_​input Y
Network Mask Enter a network Mask.​ Valid range is 1 to 32.​ gen_​text_​input Y
Network Enter a network IP Address.​ For example: If IP is 192.​168.​1.​101 and subnet mask is 255.​255.​255.​0, then the network address is 192.​168.​1.​0.​ gen_​text_​input Y
Metric Enter the metric value as an integer.​ gen_​text_​input
Hop Count Enter the hop count value as an integer.​ gen_​text_​input
Prefix Enter the prefix to be appended to the IP route name.​ gen_​text_​input Y
Tunnelled Enter tunneled value to configure Folder value.​ gen_​text_​input
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​NAME Tenant Name on which the selected operation was performed gen_​text_​input
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
FUNCTION_​PROFILE_​GROUP Tenant Function Profile Group gen_​text_​input
FUNCTION_​PROFILE_​GROUP_​IDENTITY Tenant Function Profile Group Identity Apic​Tenant​Function​Profile​Group​Identity
FUNCTION_​PROFILE_​IDENTITY Tenant Function Profile Identity Apic​Tenant​Function​Profile​Identity
FUNCTION_​PROFILE_​INTERFACE_​IDENTITY Tenant Function Profile Interface Identity Apic​Tenant​L4L7Function​Profile​Interface​Identity
FUNCTION_​PROFILE_​STATIC_​ROUTE_​IDENTITY Tenant Function Profile Static Route Identity Apic​Tenant​L4L7Function​Profile​Static​Route​Identity

Copy APIC Function Profile

Summary
Copy a function profile.
Description
This task copies a function profile on the APIC controller.
Inputs
Input Description Mappable To Type Mandatory
Function Profile Group Name Select Function Profile Group.​ Apic​Tenant​Function​Profile​Group​Identity Y
Function Profile Name Enter Function Profile name.​ gen_​text_​input Y
Function Profile Name Select an APIC Function profile.​ Apic​Tenant​Function​Profile​Identity Y
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​NAME Tenant Name on which the selected operation was performed gen_​text_​input
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
FUNCTION_​PROFILE_​GROUP Tenant Function Profile Group gen_​text_​input
FUNCTION_​PROFILE_​GROUP_​IDENTITY Tenant Function Profile Group Identity Apic​Tenant​Function​Profile​Group​Identity
FUNCTION_​PROFILE_​IDENTITY Tenant Function Profile Identity Apic​Tenant​Function​Profile​Identity

Create APIC Function Profile

Summary
Create a function profile.
Description
This task creates a function profile on the APIC controller.
Inputs
Input Description Mappable To Type Mandatory
Function Profile Group Name Select Function Profile Group.​ Apic​Tenant​Function​Profile​Group​Identity Y
Function Profile Name Enter Function Profile name.​ gen_​text_​input Y
Description Enter additional description to Function profile.​ Up to 128 characters are allowed.​ gen_​text_​input
Function Name Select Function of Function profile.​ Apic​Tenant​Service​Graph​Function​Node​Identity Y
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​NAME Tenant Name on which the selected operation was performed gen_​text_​input
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
FUNCTION_​PROFILE_​GROUP Tenant Function Profile Group gen_​text_​input
FUNCTION_​PROFILE_​GROUP_​IDENTITY Tenant Function Profile Group Identity Apic​Tenant​Function​Profile​Group​Identity
FUNCTION_​PROFILE_​IDENTITY Tenant Function Profile Identity Apic​Tenant​Function​Profile​Identity

Create L4-L7 Service Function Profile Group to APIC

Summary
Create L4-L7 service function profile group to APIC.
Description
This task creates an L4-L7 service function profile group on the APIC controller.
Inputs
Input Description Mappable To Type Mandatory
Tenant name Select Tenant to add Function Profile Group.​ Apic​Device​Tenant​Identity Y
Function Profile Group Name Enter Function Profile Group name.​ gen_​text_​input
Description Enter a description of the Function Profile Group.​ Up to 128 characters are allowed.​ gen_​text_​input
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​NAME Tenant Name on which the selected operation was performed gen_​text_​input
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
FUNCTION_​PROFILE_​GROUP Tenant Function Profile Group gen_​text_​input
FUNCTION_​PROFILE_​GROUP_​IDENTITY Tenant Function Profile Group Identity Apic​Tenant​Function​Profile​Group​Identity

Create NAT Rule

Summary
This task creates NAT Rule parameters on APIC Function Profile
Description
This task allows user to create NAT rule parameters to Function Profile on the APIC controller.
Inputs
Input Description Mappable To Type Mandatory
Function Profile Name Select Function profile to add NAT Rule.​ Apic​Tenant​Function​Profile​Identity Y
Name Enter NAT rule name.​ gen_​text_​input Y
Source Real Object Select Source Real Object.​ Apic​Tenant​L4L7Function​Profile​Network​Object​Identity
Source Mapped Object Select Source Mapped Object.​ Apic​Tenant​L4L7Function​Profile​Network​Object​Identity
Type Select NAT Rule Type.​ Apic​Create​NATRule​Type​Identity
Destination Real Object Select Destination Real Object.​ Apic​Tenant​L4L7Function​Profile​Network​Object​Identity
Destination Mapped Object Select Destination Mapped Object.​ Apic​Tenant​L4L7Function​Profile​Network​Object​Identity
Service Real Object Select Service Real Object.​ Apic​Tenant​L4L7Function​Profile​Service​Object​Identity
Service Mapped Object Select Service Mapped Object.​ Apic​Tenant​L4L7Function​Profile​Service​Object​Identity
DNS Enter DNS for NAT Rule.​ gen_​text_​input
Order Enter Order of NAT Rule.​ gen_​text_​input
Uni-Direction Enter Uni-Direction for NAT Rule.​ gen_​text_​input
Source Interface Select Function Profile Source Interface.​ Apic​Tenant​L4L7Function​Profile​Interface​Identity Y
Destination Interface Select Function Profile Destination Interface.​ Apic​Tenant​L4L7Function​Profile​Interface​Identity Y
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​NAME Tenant Name on which the selected operation was performed gen_​text_​input
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
FUNCTION_​PROFILE_​GROUP Tenant Function Profile Group gen_​text_​input
FUNCTION_​PROFILE_​GROUP_​IDENTITY Tenant Function Profile Group Identity Apic​Tenant​Function​Profile​Group​Identity
FUNCTION_​PROFILE_​IDENTITY Tenant Function Profile Identity Apic​Tenant​Function​Profile​Identity
FUNCTION_​PROFILE_​NAT_​RULES_​IDENTITY Tenant Function Profile NAT Rule Identity Apic​Tenant​L4L7Function​Profile​NATRule​Identity

Delete ACL Entry From APIC Function Profile

Summary
Delete an ACL entry from a function profile.
Description
This task deletes an ACL entry from a function profile on the APIC controller.
Inputs
Input Description Mappable To Type Mandatory
ACL Name Select an ACL Entry From an APIC Function profile.​ Apic​Tenant​L4L7Function​Profile​Acl​Identity Y
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​NAME Tenant Name on which the selected operation was performed gen_​text_​input
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
FUNCTION_​PROFILE_​GROUP Tenant Function Profile Group gen_​text_​input
FUNCTION_​PROFILE_​GROUP_​IDENTITY Tenant Function Profile Group Identity Apic​Tenant​Function​Profile​Group​Identity
FUNCTION_​PROFILE_​ACL_​IDENTITY Tenant Function Profile ACL Identity Apic​Tenant​L4L7Function​Profile​Acl​Identity

Delete APIC Function Profile

Summary
Delete a function profile.
Description
This task deletes a function profile on the APIC controller.
Inputs
Input Description Mappable To Type Mandatory
Function Profile Name Select an APIC Function profile.​ Apic​Tenant​Function​Profile​Identity
Do you want to delete the selected Function Profile? Do you want to delete the selected Function Profile? Y
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​NAME Tenant Name on which the selected operation was performed gen_​text_​input
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
FUNCTION_​PROFILE_​GROUP Tenant Function Profile Group gen_​text_​input
FUNCTION_​PROFILE_​GROUP_​IDENTITY Tenant Function Profile Group Identity Apic​Tenant​Function​Profile​Group​Identity

Delete Bridge Group Interface From APIC Function Profile

Summary
Delete a bridge group interface from a function profile.
Description
This task deletes a bridge group interface from a function profile on the APIC controller.
Inputs
Input Description Mappable To Type Mandatory
Bridge Group Interface Name Select Bridge Group Interface From an APIC Function profile.​ Apic​Tenant​L4L7Function​Profile​Bridge​Group​Interface​Identity Y
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​NAME Tenant Name on which the selected operation was performed gen_​text_​input
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
FUNCTION_​PROFILE_​GROUP Tenant Function Profile Group gen_​text_​input
FUNCTION_​PROFILE_​GROUP_​IDENTITY Tenant Function Profile Group Identity Apic​Tenant​Function​Profile​Group​Identity
FUNCTION_​PROFILE_​IDENTITY Tenant Function Profile Identity Apic​Tenant​Function​Profile​Identity
FUNCTION_​PROFILE_​BRIDGE_​GROUP_​INTERFACE_​IDENTITY Tenant Function Profile Bridge Group Interface Identity Apic​Tenant​L4L7Function​Profile​Bridge​Group​Interface​Identity

Delete Function Config Parameters From APIC Function Profile

Summary
Delete function config parameters from a function profile.
Description
This task deletes function configuration parameters From a function profile. It requires an external interface and an internal interface as inputs.
Inputs
Input Description Mappable To Type Mandatory
External Interface Select External Interface from Parameter.​ Apic​Tenant​L4L7Function​Profile​Function​Config​Ex​Intf​Identity Y
Internal Interface Select Internal Interface from Parameter.​ Apic​Tenant​L4L7Function​Profile​Function​Config​In​Intf​Identity Y
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​NAME Tenant Name on which the selected operation was performed gen_​text_​input
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
FUNCTION_​PROFILE_​GROUP Tenant Function Profile Group gen_​text_​input
FUNCTION_​PROFILE_​GROUP_​IDENTITY Tenant Function Profile Group Identity Apic​Tenant​Function​Profile​Group​Identity
FUNCTION_​PROFILE_​IDENTITY Tenant Function Profile Identity Apic​Tenant​Function​Profile​Identity

Delete Interface From APIC Function Profile

Summary
Delete an interface from a function profile.
Description
This task deletes an interface from a function profile on the APIC controller.
Inputs
Input Description Mappable To Type Mandatory
Interface Name Select Interface From an APIC Function profile.​ Apic​Tenant​L4L7Function​Profile​Interface​Identity Y
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​NAME Tenant Name on which the selected operation was performed gen_​text_​input
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
FUNCTION_​PROFILE_​GROUP Tenant Function Profile Group gen_​text_​input
FUNCTION_​PROFILE_​GROUP_​IDENTITY Tenant Function Profile Group Identity Apic​Tenant​Function​Profile​Group​Identity
FUNCTION_​PROFILE_​INTERFACE_​IDENTITY Tenant Function Profile Interface Identity Apic​Tenant​L4L7Function​Profile​Interface​Identity
FUNCTION_​PROFILE_​BRIDGE_​GROUP_​INTERFACE_​IDENTITY Tenant Function Profile Bridge Group Interface Identity Apic​Tenant​L4L7Function​Profile​Bridge​Group​Interface​Identity

Delete L4-L7 Service Function Profile Group from APIC

Summary
Delete L4-L7 service function profile group from APIC.
Description
This task deletes an L4-L7 service function profile group from the APIC controller.
Inputs
Input Description Mappable To Type Mandatory
Function Profile Group Name Select an APIC Function Profile Group.​ Apic​Tenant​Function​Profile​Group​Identity
Do you want to delete the selected Function Profile Group? Do you want to delete the selected Function Profile Group? Y
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​NAME Tenant Name on which the selected operation was performed gen_​text_​input
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
FUNCTION_​PROFILE_​GROUP Tenant Function Profile Group gen_​text_​input
FUNCTION_​PROFILE_​GROUP_​IDENTITY Tenant Function Profile Group Identity Apic​Tenant​Function​Profile​Group​Identity

Delete NAT Rule

Summary
This task deletes NAT Rule parameters on APIC Function Profile
Description
This task allows user to delete NAT rule parameters from Function Profile on the APIC controller.
Inputs
Input Description Mappable To Type Mandatory
NAT Rule Name Select NAT Rule of Function profile.​ Apic​Tenant​L4L7Function​Profile​NATRule​Identity Y
Do you want to delete the selected NAT Rule? Do you want to delete the selected NAT Rule?
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​NAME Tenant Name on which the selected operation was performed gen_​text_​input
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
FUNCTION_​PROFILE_​GROUP Tenant Function Profile Group gen_​text_​input
FUNCTION_​PROFILE_​GROUP_​IDENTITY Tenant Function Profile Group Identity Apic​Tenant​Function​Profile​Group​Identity
FUNCTION_​PROFILE_​IDENTITY Tenant Function Profile Identity Apic​Tenant​Function​Profile​Identity
FUNCTION_​PROFILE_​NAT_​RULES_​IDENTITY Tenant Function Profile NAT Rule Identity Apic​Tenant​L4L7Function​Profile​NATRule​Identity

Delete Network Object Group Parameters From APIC Function Profile

Summary
Description
Inputs
Input Description Mappable To Type Mandatory
Network Object Group Select a Network Object Group Parameters From Function profile.​ Apic​Tenant​L4L7Function​Profile​Network​Object​Group​Identity Y
Do you want to delete the selected Parameter from Function Profile? Do you want to delete the selected Parameter from Function Profile? Y
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​NAME Tenant Name on which the selected operation was performed gen_​text_​input
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
FUNCTION_​PROFILE_​GROUP Tenant Function Profile Group gen_​text_​input
FUNCTION_​PROFILE_​GROUP_​IDENTITY Tenant Function Profile Group Identity Apic​Tenant​Function​Profile​Group​Identity
FUNCTION_​PROFILE_​IDENTITY Tenant Function Profile Identity Apic​Tenant​Function​Profile​Identity
FUNCTION_​PROFILE_​NETWORK_​OBJECT_​GROUP_​IDENTITY Tenant Function Profile Network Object Group Identity Apic​Tenant​L4L7Function​Profile​Network​Object​Group​Identity

Delete Network Object Parameters From APIC Function Profile

Summary
Delete network object parameters from a function profile.
Description
This task deletes network object parameters from a function profile on the APIC controller.
Inputs
Input Description Mappable To Type Mandatory
Network Object Name Select a Network Object Parameters From an APIC Function profile.​ Apic​Tenant​L4L7Function​Profile​Network​Object​Identity Y
Do you want to delete the selected Parameter from Function Profile? Do you want to delete the selected Parameter from Function Profile? Y
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​NAME Tenant Name on which the selected operation was performed gen_​text_​input
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
FUNCTION_​PROFILE_​GROUP Tenant Function Profile Group gen_​text_​input
FUNCTION_​PROFILE_​GROUP_​IDENTITY Tenant Function Profile Group Identity Apic​Tenant​Function​Profile​Group​Identity
FUNCTION_​PROFILE_​IDENTITY Tenant Function Profile Identity Apic​Tenant​Function​Profile​Identity
FUNCTION_​PROFILE_​NETWORK_​OBJECT_​IDENTITY Tenant Function Profile Network Object Identity Apic​Tenant​L4L7Function​Profile​Network​Object​Identity

Delete Service Object Parameters From APIC Function Profile

Summary
This task deletes Service Object Parameters From APIC Function Profile
Description
This task allows user to delete Service Object Parameters from APIC Function Profile on the APIC controller.
Inputs
Input Description Mappable To Type Mandatory
Service Object Name Select Service Object Parameters From an APIC Function profile.​ Apic​Tenant​L4L7Function​Profile​Service​Object​Identity Y
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​NAME Tenant Name on which the selected operation was performed gen_​text_​input
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
FUNCTION_​PROFILE_​GROUP Tenant Function Profile Group gen_​text_​input
FUNCTION_​PROFILE_​GROUP_​IDENTITY Tenant Function Profile Group Identity Apic​Tenant​Function​Profile​Group​Identity
FUNCTION_​PROFILE_​IDENTITY Tenant Function Profile Identity Apic​Tenant​Function​Profile​Identity
FUNCTION_​PROFILE_​SERVICE_​OBJECT_​IDENTITY Tenant Function Profile Service Object Identity Apic​Tenant​L4L7Function​Profile​Service​Object​Identity

Delete Static Route From Interface On APIC Function Profile

Summary
Description
Inputs
Input Description Mappable To Type Mandatory
Static Route Select Static Route From Interface On an APIC Function profile.​ Apic​Tenant​L4L7Function​Profile​Static​Route​Identity Y
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​NAME Tenant Name on which the selected operation was performed gen_​text_​input
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
FUNCTION_​PROFILE_​GROUP Tenant Function Profile Group gen_​text_​input
FUNCTION_​PROFILE_​GROUP_​IDENTITY Tenant Function Profile Group Identity Apic​Tenant​Function​Profile​Group​Identity
FUNCTION_​PROFILE_​IDENTITY Tenant Function Profile Identity Apic​Tenant​Function​Profile​Identity
FUNCTION_​PROFILE_​INTERFACE_​IDENTITY Tenant Function Profile Interface Identity Apic​Tenant​L4L7Function​Profile​Interface​Identity
FUNCTION_​PROFILE_​STATIC_​ROUTE_​IDENTITY Tenant Function Profile Static Route Identity Apic​Tenant​L4L7Function​Profile​Static​Route​Identity