Cisco Fabric Tasks

This chapter contains the following sections:

Add Cisco DCNM Fabric Network To Network Policy

Summary
This task Add Fabric Network To Network Policy allows user to create a new NIC alias in the Network Policy.
Description
This task allows user to Add Fabric Network Port Group into NIC Alias and NIC Alias is added into Network Policy. User can add the Mandatory/Optional NIC alias in the Network Policy.
Inputs
Input Description Mappable To Type Mandatory
Policy Name Policy Name private​Cloud​Network​Policy​Provider Y
NIC Alias Enter new NIC Alias.​ gen_​text_​input Y
NIC Mandatory Mandatory or Optional
Port Group Name Port Group Name Fabric​Port​Group​Identity Y
Copy Adapter Type from Template Copy Adapter Type from Template
Adapter Type Select adapter type Network​Adapter​Type
Use DHCP Select if DHCP is used for VM IP address allocation
Select IP Address Source Select IP Address Source gen_​text_​input
Outputs
No Outputs

Add Cisco DCNM Fabric Network To Network Policy Allowed PortGroup

Summary
This task Add Fabric Network To Network Policy Allowed Port group allows user to add a Fabric Port group to the existing NIC alias in the Network Policy.
Description
This task allows user to Add Fabric Network To Network Policy Allowed Port group, this should add a Fabric Portgroup to the existing NIC alias in the Network Policy. This task should enable the allow end user to choose Port group in the NIC alias if there is a single Port group available in the NIC alias. After the rollback of this task if the NIC alias has one port group then the allow end user to choose port group should be disable Otherwise the option should be enabled.
Inputs
Input Description Mappable To Type Mandatory
Policy Name Policy Name private​Cloud​Network​Policy​Provider Y
NIC Alias Enter NIC Alias from selected policy.​ gen_​text_​input Y
Allow end user to choose Port Groups Selecting this option enables end user to choose port groups during provisioning
Port Group Name Port Group Name Fabric​Port​Group​Identity Y
Use DHCP Select if DHCP is used for VM IP address allocation
Select IP Address Source Select IP Address Source gen_​text_​input
Outputs
No Outputs

Cisco DCNM Fabric Network Selector

Summary
This task Fabric Network Selector contains the Fabric Network related information as Output.
Description
This task Fabric Network Selector allows user to choose the Fabric Network. Output of this task contains the Fabric Network related details.
Inputs
Input Description Mappable To Type Mandatory
Segment Id Select Segment Id Fabric​Network​Identity Y
Outputs
Output Description Type
OUTPUT_​ACCOUNT_​ID Identity of the DCNM Account for which the selected operation was performed DCNMAccount​Identity
OUTPUT_​ACCOUNT_​NAME Name of the Account for which the selected operation was performed gen_​text_​input
OUTPUT_​ORGANIZATION_​ID Identity of the organization for which the selected operation was performed Fabric​Organization​Identity
OUTPUT_​ORGANIZATION_​NAME Name of the organization for which the selected operation was performed gen_​text_​input
OUTPUT_​PARTITION_​ID Identity of the partition for which the selected operation was performed Fabric​Partition​Identity
OUTPUT_​PARTITION_​NAME Name of the partition for which the selected operation was performed gen_​text_​input
OUTPUT_​NETWORK_​ID Identity of the network for which the selected operation was performed Fabric​Network​Identity
OUTPUT_​NETWORK_​NAME Name of the network for which the selected operation was performed gen_​text_​input
OUTPUT_​NETWORK_​SEGMENTID Identity of the network segment for which the selected operation was performed Fabric​Network​Segment​Pool​Identity
OUTPUT_​PROFILE_​NAME Name of the profile for which the selected operation was performed Fabric​Network​Profile​Identity
OUTPUT_​VLAN_​ID Id of the vlan which will be maped vlan​ID
OUTPUT_​VSWITCH_​ID v​Switch identity for which the selected operation was performed Fabricv​Switch​Identity
OUTPUT_​DVSWITCH_​ID dv​Switch identity for which the selected operation was performed Fabricdv​Switch​Identity
OUTPUT_​MOBILITY_​DOMAIN_​IDENTITY Mobility Domain identity for which the selected operation was performed Fabric​Mobility​Domain​Identity

Cisco DCNM Fabric Port Group Selector

Summary
This task Fabric Port Group Selector contains Fabric Port group related information as Output.
Description
This task Fabric Port Group Selector allows user to choose the Port group or Fabric Port group. Output of this task contains the Port group/ Fabric Port group related details.
Inputs
Input Description Mappable To Type Mandatory
Port Group Port Group Name vmware​Vm​Port​Group​Identity
Fabric Port Group Port Group Name Fabric​Port​Group​Identity
Outputs
Output Description Type
OUTPUT_​PORT_​GROUP_​NAME Created port group name for which the selected operation was performed port​Group​Name
OUTPUT_​PORT_​GROUP_​IDENTITY Identity of the port group for which the selected operation was performed vmware​Vm​Port​Group​Identity
OUTPUT_​PORT_​GROUP_​TYPE Created port group type for which the selected operation was performed port​Group​Type
OUTPUT_​FABRIC_​PORT_​GROUP_​NAME Created Fabric port group name for which the selected operation was performed gen_​text_​input
OUTPUT_​FABRIC_​PORT_​GROUP_​IDENTITY Identity of the Fabric port group for which the selected operation was performed Fabric​Port​Group​Identity
OUTPUT_​SWITCH_​NAME Switch name for which the selected operation was performed Fabric​Switch​Name
OUTPUT_​VSWITCH_​ID v​Switch identity for which the selected operation was performed Fabricv​Switch​Identity
OUTPUT_​DVSWITCH_​ID dv​Switch identity for which the selected operation was performed Fabricdv​Switch​Identity
OUTPUT_​HOST_​NAME Host Name for which the selected operation was performed gen_​text_​input
OUTPUT_​VLAN_​ID Id of the vlan which will be maped vlan​ID
OUTPUT_​VMWARE_​PORT_​GROUP_​IDENTITY Vmware port group Identity for which the selected operation was performed port​Group​Identity
OUTPUT_​VMWARE_​DVPORT_​GROUP_​IDENTITY Vmware dv-port group Identity for which the selected operation was performed VMware​DVPortgroup​Identity

Cisco DCNM Fabric VDC Selector

Summary
This task Fabric VDC Selector contains the network, storage, compute and system policies and switch related information as Output.
Description
This task Fabric VDC Selector allows user to choose the Account and VDC, the corresponding Account, VDC Switch Association should be available in the Fabric VDC Switch Association Policy. Output of this task contains the compute, network, Storage and system policies of selected VDC and the first four vswitches, dvSwitches, n1kSwitches, list of the vswitches and dvSwitches of Fabric VDC Switch Association Report.
Inputs
Input Description Mappable To Type Mandatory
Fabric Account Select an account DCNMAccount​Identity Y
Select VDC Select vdc.​ v​DC Y
Outputs
Output Description Type
OUTPUT_​ACCOUNT_​ID Identity of the DCNM Account for which the selected operation was performed DCNMAccount​Identity
OUTPUT_​VDC_​COMPUTE_​POLICY VDC Compute Policy Name for which the selected operation was performed gen_​text_​input
OUTPUT_​VDC_​STORAGE_​POLICY VDC Storage Policy Name for which the selected operation was performed gen_​text_​input
OUTPUT_​VDC_​NETWORK_​POLICY VDC Network Policy Name for which the selected operation was performed private​Cloud​Network​Policy​Provider
OUTPUT_​VDC_​SYSTEM_​POLICY VDC System Policy Name for which the selected operation was performed gen_​text_​input
OUTPUT_​VSWITCH_​ID_​1 v​Switch identity for which the selected operation was performed Fabricv​Switch​Identity
OUTPUT_​VSWITCH_​ID_​2 v​Switch identity for which the selected operation was performed Fabricv​Switch​Identity
OUTPUT_​VSWITCH_​ID_​3 v​Switch identity for which the selected operation was performed Fabricv​Switch​Identity
OUTPUT_​VSWITCH_​ID_​4 v​Switch identity for which the selected operation was performed Fabricv​Switch​Identity
OUTPUT_​VSWITCH_​IDS v​Switch identities for which the selected operation was performed gen_​text_​input
OUTPUT_​DVSWITCH_​ID_​1 dv​Switch identity for which the selected operation was performed Fabricdv​Switch​Identity
OUTPUT_​DVSWITCH_​ID_​2 dv​Switch identity for which the selected operation was performed Fabricdv​Switch​Identity
OUTPUT_​DVSWITCH_​ID_​3 dv​Switch identity for which the selected operation was performed Fabricdv​Switch​Identity
OUTPUT_​DVSWITCH_​ID_​4 dv​Switch identity for which the selected operation was performed Fabricdv​Switch​Identity
OUTPUT_​DVSWITCH_​IDS dv​Switch identities for which the selected operation was performed gen_​text_​input
OUTPUT_​N1KSWITCH_​ID_​1 N1KSwitch identity for which the selected operation was performed Fabricdv​Switch​Identity
OUTPUT_​N1KSWITCH_​ID_​2 N1KSwitch identity for which the selected operation was performed Fabricdv​Switch​Identity
OUTPUT_​N1KSWITCH_​ID_​3 N1KSwitch identity for which the selected operation was performed Fabricdv​Switch​Identity
OUTPUT_​N1KSWITCH_​ID_​4 N1KSwitch identity for which the selected operation was performed Fabricdv​Switch​Identity
OUTPUT_​GROUP_​ID This Group is selected while creating Organization gen_​text_​input
OUTPUT_​GROUP_​NAME This Group is selected while creating Organization gen_​text_​input

Create Cisco DCNM Fabric Mobility Domain

Summary
This task Creates Fabric Mobility Domain.Contains MobilityDomain ID and MobilityDomain Identity as Output.
Description
This task allows user to Create Fabric Mobility Domain.
Inputs
Input Description Mappable To Type Mandatory
Fabric Account Select an account DCNMAccount​Identity Y
Mobility​Domain Name Enter Mobility​Domain Name gen_​text_​input Y
VLAN Range Enter VLAN Range gen_​text_​input Y
Outputs
Output Description Type
OUTPUT_​MOBILITY_​DOMAIN_​ID Mobility Domain for which the selected operation was performed gen_​text_​input
OUTPUT_​MOBILITY_​DOMAIN_​IDENTITY Mobility Domain identity for which the selected operation was performed Fabric​Mobility​Domain​Identity

Create Cisco DCNM Fabric Network

Summary
This task Creates Fabric Network contains Fabric Network as Output.
Description
This task allows user to select the Switch from a Specific Cloud to which the Fabric Network should be created in the corresponding DCNM Account. Created Fabric Network information should be displayed in the Fabric Network Report, Fabric Port Group Report contains the Information of the port group associated with Fabric Network and Fabric Network Config Profile Report contains the information about the Profile associated with the Fabric Network By default there will be the vCenter IP as the Mobility Domain ID, we can change the mobility domain id with some other IP Address, For N1k Switch the vlanid=0 and Mobility Domain Id will be None For start ip and end ip the following scenarios are applicable a.Default gateway = 1.1.1.1, DHCP range is 1.1.1.2-1.1.1.10, then static range should be staticIpStart=1.1.1.11, staticIpEnd=1.1.1.254 b. Default gateway =1.1.1.1, DHCP range is unspecified, then static range should be staticIpStart=1.1.1.2, staticIpEnd=1.1.1.254 c. Default gateway = 1.1.1.10, DHCP range is 1.1.1.11-1.1.1.19, then static range should be staticIpStart=1.1.1.20, staticIpEnd=1.1.1.254 OR staticIpStart=1.1.1.1, staticIpEnd=1.1.1.9 d. Default gateway = 1.1.1.1, DHCP range is 1.1.1.2-1.1.1.254, then static range should be BLANK. e. If the startip and end ip are specified in the task then the values should be persist. While calculating the ip range or static ip range it should assign max IP available part. Output of this task contains DCNM Account, Fabric Organization, Fabric Partition and Fabric Network along with the Switch Name, vmware Port groups, Fabric Port groups, vlan id and mobility domain id. Note: The parameters Network Role, Secondary Gateway IP address are dependent on the DCNM Account Version and should be displayed as empty when the underlying DCNM Account version doesnât support these.
Inputs
Input Description Mappable To Type Mandatory
Partition Enter Partition Fabric​Partition​Identity Y
Network Name Enter Network Name gen_​text_​input Y
Network Role Enter Network Role Fabric​Network​Role Y
Description Enter Description gen_​text_​input
Gateway IP Address Enter Gateway IP Address ipv4Address
Subnet Mask Enter Subnet Mask subnet​Mask
Switch Type Select Switch Type Fabric​Network​Switch​Type
Select dv​Switch Select dv​Switch.​ Fabricdv​Switch​Identity
Select v​Switch Select v​Switch.​ Fabricv​Switch​Identity
Profile Name Select Profile Name Fabric​Network​Profile​Identity Y
Profile Parameters
DHCP Server Address Enter Profile dhcp​Server​Address ipv4Address
vrf​Dhcp Enter vrf​Dhcp gen_​text_​input
mtu​Value Enter mtu​Value gen_​text_​input
dhcp​Serverv6Address Enter dhcp​Serverv6Address gen_​text_​input
vrfv6Dhcp Enter vrfv6Dhcp gen_​text_​input
IPv6 enabled Enable Ipv6
Gateway IPv6 Address Enter Profile gateway​Ipv6Address gen_​text_​input
Prefix Length Enter Profile prefix​Length gen_​text_​input
Network Id
Segment Id Enter Segment ID gen_​text_​input Y
Auto​Select is segment​Id auto​Select
Mobility Domain Id Enter Mobility Domain Id gen_​text_​input Y
Auto​Select Mobility Domain Id is Mobility Domain Id auto​Select
Vlan Enter vlan gen_​text_​input
DHCP Scope
DHCP enabled Enable DHCP
IP Range Enter IP Range gen_​text_​input
Service Configuration Parameters
Start IP Enter Start IP ipv4Address
End IP Enter End IP ipv4Address
Secondary Gateway Enter Secondary Gateway ipv4Address
Outputs
Output Description Type
OUTPUT_​ACCOUNT_​ID Identity of the DCNM Account for which the selected operation was performed DCNMAccount​Identity
OUTPUT_​ACCOUNT_​NAME Name of the Account for which the selected operation was performed gen_​text_​input
OUTPUT_​ORGANIZATION_​ID Identity of the organization for which the selected operation was performed Fabric​Organization​Identity
OUTPUT_​ORGANIZATION_​NAME Name of the organization for which the selected operation was performed gen_​text_​input
OUTPUT_​PARTITION_​ID Identity of the partition for which the selected operation was performed Fabric​Partition​Identity
OUTPUT_​PARTITION_​NAME Name of the partition for which the selected operation was performed gen_​text_​input
OUTPUT_​NETWORK_​ID Identity of the network for which the selected operation was performed Fabric​Network​Identity
OUTPUT_​NETWORK_​NAME Name of the network for which the selected operation was performed gen_​text_​input
OUTPUT_​NETWORK_​SEGMENTID Identity of the network segment for which the selected operation was performed Fabric​Network​Segment​Pool​Identity
OUTPUT_​PROFILE_​ID Identity of the profile for which the selected operation was performed Fabric​Network​Profile​Identity
OUTPUT_​PROFILE_​NAME Name of the profile for which the selected operation was performed Fabric​Network​Profile​Identity
OUTPUT_​VLAN_​ID Id of the vlan which will be maped vlan​ID
OUTPUT_​PORT_​GROUP_​IDENTITY Identity of the port group for which the selected operation was performed vmware​Vm​Port​Group​Identity
OUTPUT_​PORT_​GROUP_​NAME Created port group name for which the selected operation was performed port​Group​Name
OUTPUT_​PORT_​GROUP_​TYPE Created port group type for which the selected operation was performed port​Group​Type
OUTPUT_​SWITCH_​NAME Switch name for which the selected operation was performed Fabric​Switch​Name
OUTPUT_​FABRIC_​PORT_​GROUP_​IDENTITY Identity of the Fabric port group for which the selected operation was performed Fabric​Port​Group​Identity
OUTPUT_​FABRIC_​PORT_​GROUP_​NAME Created Fabric port group name for which the selected operation was performed gen_​text_​input
OUTPUT_​VMWARE_​PORT_​GROUP_​IDENTITY Vmware port group Identity for which the selected operation was performed port​Group​Identity
OUTPUT_​VMWARE_​VM_​PORT_​GROUP_​IDENTITY Vmware vm port group Identity for which the selected operation was performed vmware​Vm​Port​Group​Identity
OUTPUT_​VMWARE_​DVPORT_​GROUP_​IDENTITY Vmware dv-port group Identity for which the selected operation was performed VMware​DVPortgroup​Identity
OUTPUT_​MOBILITY_​DOMAIN_​ID Mobility Domain for which the selected operation was performed gen_​text_​input
OUTPUT_​MOBILITY_​DOMAIN_​IDENTITY Mobility Domain identity for which the selected operation was performed Fabric​Mobility​Domain​Identity

Create Cisco DCNM Fabric Network for VDC Enabled Switches

Summary
This task Creates Fabric Network for VDC Enabled Switches allows user to create Port groups/Fabric Port groups as Output.
Description
This task allows user to Create Fabric Network for VDC Enabled Switches, based on the switches(vSwitch/dvSwitch/N1KSwitch) available in the Fabric VDC Switch Association Policy. User select all vSwitches/ all dvSwitches, It creates one Fabric Network with vSwitch/dvSwitch and creates remaining port groups and added into NIC alias. Created portGroups having same vlanId. For start ip and end ip the following scenarios are applicable a.Default gateway = 1.1.1.1, DHCP range is 1.1.1.2-1.1.1.10, then static range should be staticIpStart=1.1.1.11, staticIpEnd=1.1.1.254 b. Default gateway =1.1.1.1, DHCP range is unspecified, then static range should be staticIpStart=1.1.1.2, staticIpEnd=1.1.1.254 c. Default gateway = 1.1.1.10, DHCP range is 1.1.1.11-1.1.1.19, then static range should be staticIpStart=1.1.1.20, staticIpEnd=1.1.1.254 OR staticIpStart=1.1.1.1, staticIpEnd=1.1.1.9 d. Default gateway = 1.1.1.1, DHCP range is 1.1.1.2-1.1.1.254, then static range should be BLANK. e. If the startip and end ip are specified in the task then the values should be persist. While calculating the ip range or static ip range it should assign max IP available part. Output of this task contains the Port group, Fabric Port group details, Mobility Domain ID, vlanid and vlanid list. Note: 1. User is having a N1k Switch in the Fabric VDC Switch Association Policy, if user used this with the combination of dvswitch available in the Fabric VDC Switch Association Policy then the task fails. 2. The parameters Network Role, Secondary Gateway IP address are dependent on the DCNM Account Version and should be displayed as empty when the underlying DCNM Account version doesnât support these.
Inputs
Input Description Mappable To Type Mandatory
Select VDC Select VDC from VDC Fabric Switch Association v​DC Y
Switch Type Select Switch Type Y
Partition Name Enter Partition Name Fabric​Partition​Identity Y
Network Name Enter Network Name gen_​text_​input Y
Network Role Enter Network Role Fabric​Network​Role Y
Description Enter Description gen_​text_​input
Gateway IP Address Enter Gateway IP Address ipv4Address
Subnet Mask Enter Subnet Mask subnet​Mask
Profile Name Select Profile Name Fabric​Network​Profile​Identity Y
Profile Parameters
DHCP Server Address Enter Profile dhcp​Server​Address ipv4Address
vrf​Dhcp Enter vrf​Dhcp gen_​text_​input
mtu​Value Enter mtu​Value gen_​text_​input
dhcp​Serverv6Address Enter dhcp​Serverv6Address gen_​text_​input
vrfv6Dhcp Enter vrfv6Dhcp gen_​text_​input
IPv6 enabled Enable Ipv6
Gateway IPv6 Address Enter Profile gateway​Ipv6Address gen_​text_​input
Prefix Length Enter Profile prefix​Length gen_​text_​input
Network Id
Segment Id Enter Segment ID gen_​text_​input Y
Auto​Select is segment​Id auto​Select
Mobility Domain Id Enter Mobility Domain Id gen_​text_​input Y
Auto​Select Mobility Domain Id is Mobility Domain Id auto​Select
DHCP Scope
DHCP enabled Enable DHCP
IP Range Enter IP Range gen_​text_​input
Service Configuration Parameters
Start IP Enter Start IP ipv4Address
End IP Enter End IP ipv4Address
Secondary Gateway Enter Secondary Gateway ipv4Address
Allow NIC Alias Update
Add Port Group to Network Policy Add Port Group to network Policy
Allow end user to choose Port Groups Selecting this option enables end user to choose port groups during provisioning
NIC Alias Enter NIC names separated by comma gen_​text_​input Y
Use DHCP Select if DHCP is used for VM IP address allocation
Select IP Address Source Select IP Address Source gen_​text_​input
Outputs
Output Description Type
OUTPUT_​FABRIC_​PORT_​GROUP_​IDENTITY_​1 Identity of the Fabric port group for which the selected operation was performed Fabric​Port​Group​Identity
OUTPUT_​FABRIC_​PORT_​GROUP_​IDENTITY_​2 Identity of the DFA port group for which the selected operation was performed Fabric​Port​Group​Identity
OUTPUT_​FABRIC_​PORT_​GROUP_​IDENTITY_​3 Identity of the Fabric port group for which the selected operation was performed Fabric​Port​Group​Identity
OUTPUT_​FABRIC_​PORT_​GROUP_​IDENTITY_​4 Identity of Fabric the port group for which the selected operation was performed Fabric​Port​Group​Identity
OUTPUT_​PORT_​GROUP_​IDENTITY_​1 Identity of the port group for which the selected operation was performed vmware​Vm​Port​Group​Identity
OUTPUT_​PORT_​GROUP_​IDENTITY_​2 Identity of the port group for which the selected operation was performed vmware​Vm​Port​Group​Identity
OUTPUT_​PORT_​GROUP_​IDENTITY_​3 Identity of the port group for which the selected operation was performed vmware​Vm​Port​Group​Identity
OUTPUT_​PORT_​GROUP_​IDENTITY_​4 Identity of the port group for which the selected operation was performed vmware​Vm​Port​Group​Identity
OUTPUT_​PORT_​GROUP_​IDENTITIES dv​Switch identities for which the selected operation was performed gen_​text_​input
OUTPUT_​VLAN_​ID_​1 Id of the vlan which will be maped vlan​ID
OUTPUT_​VLAN_​ID_​2 Id of the vlan which will be maped vlan​ID
OUTPUT_​VLAN_​ID_​3 Id of the vlan which will be maped vlan​ID
OUTPUT_​VLAN_​ID_​4 Id of the vlan which will be maped vlan​ID
OUTPUT_​VLANS vlans which will be maped gen_​text_​input
OUTPUT_​VMWARE_​VM_​PORT_​GROUP_​IDENTITY_​1 Vmware vm port group Identity for which the selected operation was performed vmware​Vm​Port​Group​Identity
OUTPUT_​VMWARE_​VM_​PORT_​GROUP_​IDENTITY_​2 Vmware vm port group Identity for which the selected operation was performed vmware​Vm​Port​Group​Identity
OUTPUT_​VMWARE_​VM_​PORT_​GROUP_​IDENTITY_​3 Vmware vm port group Identity for which the selected operation was performed vmware​Vm​Port​Group​Identity
OUTPUT_​VMWARE_​VM_​PORT_​GROUP_​IDENTITY_​4 Vmware vm port group Identity for which the selected operation was performed vmware​Vm​Port​Group​Identity
OUTPUT_​VMWARE_​PORT_​GROUP_​IDENTITY_​1 Vmware port group Identity for which the selected operation was performed port​Group​Identity
OUTPUT_​VMWARE_​PORT_​GROUP_​IDENTITY_​2 Vmware port group Identity for which the selected operation was performed port​Group​Identity
OUTPUT_​VMWARE_​PORT_​GROUP_​IDENTITY_​3 Vmware port group Identity for which the selected operation was performed port​Group​Identity
OUTPUT_​VMWARE_​PORT_​GROUP_​IDENTITY_​4 Vmware port group Identity for which the selected operation was performed port​Group​Identity
OUTPUT_​VMWARE_​DVPORT_​GROUP_​IDENTITY_​1 Vmware dv-port group Identity for which the selected operation was performed VMware​DVPortgroup​Identity
OUTPUT_​VMWARE_​DVPORT_​GROUP_​IDENTITY_​2 Vmware dv-port group Identity for which the selected operation was performed VMware​DVPortgroup​Identity
OUTPUT_​VMWARE_​DVPORT_​GROUP_​IDENTITY_​3 Vmware dv-port group Identity for which the selected operation was performed VMware​DVPortgroup​Identity
OUTPUT_​VMWARE_​DVPORT_​GROUP_​IDENTITY_​4 Vmware dv-port group Identity for which the selected operation was performed VMware​DVPortgroup​Identity
OUTPUT_​MOBILITY_​DOMAIN_​ID Mobility Domain for which the selected operation was performed gen_​text_​input
OUTPUT_​MOBILITY_​DOMAIN_​IDENTITY Mobility Domain identity for which the selected operation was performed Fabric​Mobility​Domain​Identity

Create Cisco DCNM Fabric Organization

Summary
This task Creates Fabric Organization contains Fabric Organization as Output.
Description
This task allows user to Create Fabric Organization with a group, in the DCNM Account level only one Group can be associated to a Single Fabric Organization. Output of this task contains the DCNM Account details, Fabric Organization and Group.
Inputs
Input Description Mappable To Type Mandatory
Fabric Account Select an account DCNMAccount​Identity Y
Organization Name Enter Organization Name gen_​text_​input Y
Description Enter Organization Description gen_​text_​input
Orchestration Source Enter Orchestration Source
Group User Group user​Group Y
Outputs
Output Description Type
OUTPUT_​ACCOUNT_​ID Identity of the DCNM Account for which the selected operation was performed DCNMAccount​Identity
OUTPUT_​ACCOUNT_​NAME Name of the Account for which the selected operation was performed gen_​text_​input
OUTPUT_​ORGANIZATION_​ID Identity of the organization for which the selected operation was performed Fabric​Organization​Identity
OUTPUT_​ORGANIZATION_​NAME Name of the organization for which the selected operation was performed gen_​text_​input
OUTPUT_​GROUP_​ID This Group is selected while creating Organization gen_​text_​input
OUTPUT_​GROUP_​NAME This Group is selected while creating Organization gen_​text_​input

Create Cisco DCNM Fabric Partition

Summary
This task Creates Fabric Partition contains Fabric Partition as Output.
Description
This task allows user to Create Fabric Partition under a Fabric Organization, we can create ânâ number of Fabric Partitions under a Single Fabric Organization. Based on the Fabric Encapsulation the profile Name will be displayed If Extend the Partition across Fabric is Enabled then DCI id is mandatory and in the DCNM corresponding configurations should be done Output of this task contains the DCNM Account details, Fabric Organization and Fabric Partition. Note: The parameters DCI ID, Multi Cast Group Address and profile Parameters are applicable for only Version 7.1(0.139) or higher version. If the Profile Name is None then profile Parameters will not be displayed where as if profile Name is other than Non-None then only BorderLeafRt will be displayed. All Higher version parameters are optional and in the lower version DCNM in UCSD will display as empty. IF Extend the Partition across Fabric then profile Name should be Non-None
Inputs
Input Description Mappable To Type Mandatory
Organization Name Select Organization Name Fabric​Organization​Identity Y
Partition Name Enter Partition Name gen_​text_​input Y
Description Enter Description gen_​text_​input
DCI ID Enter DCI ID gen_​text_​input
Extend the Partition across the Fabric Extend the Partition across the Fabric
Service Node IP Address Enter Service Node IP Address ipv4Address
DNS Server Enter DNS Server ipv4Address
Secondary DNS Server Enter Secondary DNS Server ipv4Address
Multi Cast Group Address Enter Multi Cast Group Address ipv4Address
Profile Name Enter Profile Name Fabric​Partition​Profile​Identity
Profile Parameters
Border Leaf​Rt Enter Border Leaf​Rt gen_​text_​input
Outputs
Output Description Type
OUTPUT_​ACCOUNT_​ID Identity of the DCNM Account for which the selected operation was performed DCNMAccount​Identity
OUTPUT_​ACCOUNT_​NAME Name of the Account for which the selected operation was performed gen_​text_​input
OUTPUT_​ORGANIZATION_​ID Identity of the organization for which the selected operation was performed Fabric​Organization​Identity
OUTPUT_​ORGANIZATION_​NAME Name of the organization for which the selected operation was performed gen_​text_​input
OUTPUT_​PARTITION_​ID Identity of the partition for which the selected operation was performed Fabric​Partition​Identity
OUTPUT_​PARTITION_​NAME Name of the partition for which the selected operation was performed gen_​text_​input

Create VDC-Cisco DCNM Fabric Switch Association

Summary
This task Creates VDC Fabric Switch Association contains Fabric VDC Association in the Fabric VDC Switch Association Policy Report.
Description
This task allows user to Create VDC Fabric Switch Association.Fabric,VDC Association with the corresponding Switch should be created in the Fabric VDC Switch Association Policy Report. User should select Switch from cloud account which is associated into the VDC.Selected Fabric VDC Switch available in Fabric VDC Switch Association Policy Report. VDC Fabric Switch Association Policy used for Create End User Fabric Network and Create Fabric Network for Enabled Switches task.
Inputs
Input Description Mappable To Type Mandatory
Fabric Account Select an account DCNMAccount​Identity Y
Select VDC Select vdc.​ v​DC Y
Select Switches Select Switches.​ Fabric​Switch​Identity Y
Outputs
No Outputs

Create end-user Cisco DCNM Fabric Network

Summary
This task Create end-user Fabric Network allows user to create the Fabric Networks for the Switches available in the Fabric VDC Switch Association Policy.
Description
This task allows user to Create end-user Fabric Network, based on the switches available in the VDC Fabric Switch Association Policy. It creates Fabric Networks based on the Association in Fabric VDC Switch Association Policy. Fabric Networks are added into the corresponding NIC alias. User should specify the NIC alias present in the Network Policy for any VDC available in the VDC Fabric Switch Association Policy. For start ip and end ip the following scenarios are applicable a.Default gateway = 1.1.1.1, DHCP range is 1.1.1.2-1.1.1.10, then static range should be staticIpStart=1.1.1.11, staticIpEnd=1.1.1.254 b. Default gateway =1.1.1.1, DHCP range is unspecified, then static range should be staticIpStart=1.1.1.2, staticIpEnd=1.1.1.254 c. Default gateway = 1.1.1.10, DHCP range is 1.1.1.11-1.1.1.19, then static range should be staticIpStart=1.1.1.20, staticIpEnd=1.1.1.254 OR staticIpStart=1.1.1.1, staticIpEnd=1.1.1.9 d. Default gateway = 1.1.1.1, DHCP range is 1.1.1.2-1.1.1.254, then static range should be BLANK. e. If the startip and end ip are specified in the task then the values should be persist. While calculating the ip range or static ip range it should assign max IP available part. Output of this task contains the Port group, Fabric Port group details, Mobility Domain ID, vlanid and vlanid list. Note: The parameters Network Role, Secondary Gateway IP address are dependent on the DCNM Account Version and should be displayed as empty when the underlying DCNM Account version doesnât support these.
Inputs
Input Description Mappable To Type Mandatory
Partition Name Enter Partition Name Fabric​Partition​Identity Y
Network Name Enter Network Name gen_​text_​input Y
Network Role Enter Network Role Fabric​Network​Role Y
Description Enter Description gen_​text_​input
Gateway IP Address Enter Gateway IP Address ipv4Address
Subnet Mask Enter Subnet Mask subnet​Mask
Profile Name Select Profile Name Fabric​Network​Profile​Identity Y
Profile Parameters
DHCP Server Address Enter Profile dhcp​Server​Address ipv4Address
vrf​Dhcp Enter vrf​Dhcp gen_​text_​input
mtu​Value Enter mtu​Value gen_​text_​input
dhcp​Serverv6Address Enter dhcp​Serverv6Address gen_​text_​input
vrfv6Dhcp Enter vrfv6Dhcp gen_​text_​input
IPv6 enabled Enable Ipv6
Gateway IPv6 Address Enter Profile gateway​Ipv6Address gen_​text_​input
Prefix Length Enter Profile prefix​Length gen_​text_​input
Network Id
Segment Id Enter Segment ID gen_​text_​input Y
Auto​Select is segment​Id auto​Select
Mobility Domain Id Enter Mobility Domain Id gen_​text_​input Y
Auto​Select Mobility Domain Id is Mobility Domain Id auto​Select
DHCP Scope
DHCP enabled Enable DHCP
IP Range Enter IP Range gen_​text_​input
Service Configuration Parameters
Start IP Enter Start IP ipv4Address
End IP Enter End IP ipv4Address
Secondary Gateway Enter Secondary Gateway ipv4Address
Allow NIC Alias Update
Add Port Group to Network Policy Add Port Group to network Policy
Allow end user to choose Port Groups Selecting this option enables end user to choose port groups during provisioning
NIC Alias Enter NIC names separated by comma gen_​text_​input Y
Use DHCP Select if DHCP is used for VM IP address allocation
Select IP Address Source Select IP Address Source gen_​text_​input
Outputs
Output Description Type
OUTPUT_​FABRIC_​PORT_​GROUP_​IDENTITY_​1 Identity of the Fabric port group for which the selected operation was performed Fabric​Port​Group​Identity
OUTPUT_​FABRIC_​PORT_​GROUP_​IDENTITY_​2 Identity of the DFA port group for which the selected operation was performed Fabric​Port​Group​Identity
OUTPUT_​FABRIC_​PORT_​GROUP_​IDENTITY_​3 Identity of the Fabric port group for which the selected operation was performed Fabric​Port​Group​Identity
OUTPUT_​FABRIC_​PORT_​GROUP_​IDENTITY_​4 Identity of Fabric the port group for which the selected operation was performed Fabric​Port​Group​Identity
OUTPUT_​PORT_​GROUP_​IDENTITY_​1 Identity of the port group for which the selected operation was performed vmware​Vm​Port​Group​Identity
OUTPUT_​PORT_​GROUP_​IDENTITY_​2 Identity of the port group for which the selected operation was performed vmware​Vm​Port​Group​Identity
OUTPUT_​PORT_​GROUP_​IDENTITY_​3 Identity of the port group for which the selected operation was performed vmware​Vm​Port​Group​Identity
OUTPUT_​PORT_​GROUP_​IDENTITY_​4 Identity of the port group for which the selected operation was performed vmware​Vm​Port​Group​Identity
OUTPUT_​PORT_​GROUP_​IDENTITIES dv​Switch identities for which the selected operation was performed gen_​text_​input
OUTPUT_​VLAN_​ID_​1 Id of the vlan which will be maped vlan​ID
OUTPUT_​VLAN_​ID_​2 Id of the vlan which will be maped vlan​ID
OUTPUT_​VLAN_​ID_​3 Id of the vlan which will be maped vlan​ID
OUTPUT_​VLAN_​ID_​4 Id of the vlan which will be maped vlan​ID
OUTPUT_​VLANS vlans which will be maped gen_​text_​input
OUTPUT_​VMWARE_​VM_​PORT_​GROUP_​IDENTITY_​1 Vmware vm port group Identity for which the selected operation was performed vmware​Vm​Port​Group​Identity
OUTPUT_​VMWARE_​VM_​PORT_​GROUP_​IDENTITY_​2 Vmware vm port group Identity for which the selected operation was performed vmware​Vm​Port​Group​Identity
OUTPUT_​VMWARE_​VM_​PORT_​GROUP_​IDENTITY_​3 Vmware vm port group Identity for which the selected operation was performed vmware​Vm​Port​Group​Identity
OUTPUT_​VMWARE_​VM_​PORT_​GROUP_​IDENTITY_​4 Vmware vm port group Identity for which the selected operation was performed vmware​Vm​Port​Group​Identity
OUTPUT_​VMWARE_​PORT_​GROUP_​IDENTITY_​1 Vmware port group Identity for which the selected operation was performed port​Group​Identity
OUTPUT_​VMWARE_​PORT_​GROUP_​IDENTITY_​2 Vmware port group Identity for which the selected operation was performed port​Group​Identity
OUTPUT_​VMWARE_​PORT_​GROUP_​IDENTITY_​3 Vmware port group Identity for which the selected operation was performed port​Group​Identity
OUTPUT_​VMWARE_​PORT_​GROUP_​IDENTITY_​4 Vmware port group Identity for which the selected operation was performed port​Group​Identity
OUTPUT_​VMWARE_​DVPORT_​GROUP_​IDENTITY_​1 Vmware dv-port group Identity for which the selected operation was performed VMware​DVPortgroup​Identity
OUTPUT_​VMWARE_​DVPORT_​GROUP_​IDENTITY_​2 Vmware dv-port group Identity for which the selected operation was performed VMware​DVPortgroup​Identity
OUTPUT_​VMWARE_​DVPORT_​GROUP_​IDENTITY_​3 Vmware dv-port group Identity for which the selected operation was performed VMware​DVPortgroup​Identity
OUTPUT_​VMWARE_​DVPORT_​GROUP_​IDENTITY_​4 Vmware dv-port group Identity for which the selected operation was performed VMware​DVPortgroup​Identity
OUTPUT_​MOBILITY_​DOMAIN_​ID Mobility Domain for which the selected operation was performed gen_​text_​input
OUTPUT_​MOBILITY_​DOMAIN_​IDENTITY Mobility Domain identity for which the selected operation was performed Fabric​Mobility​Domain​Identity

Delete Cisco DCNM Fabric Mobility Domain

Summary
This task Deletes Fabric Mobility Domain.
Description
This task allows user to Delete Fabric Mobility Domain.
Inputs
Input Description Mappable To Type Mandatory
Mobility​Domain Name Select Mobility​Domain Name Fabric​Mobility​Domain​Identity Y
Outputs
No Outputs

Delete Cisco DCNM Fabric Network

Summary
This task Deletes Fabric Network contains Fabric Network,DCNM Account,Fabric Organization and Fabric Partition as Output.
Description
This task allows user to delete the Fabric Network. When the Portgroup is attached to the VM, then Force Delete Flag by default false, Number of Retry and Iteration if Force delete is enabled. By default if Force Delete is enabled, Retry is zero and Iteration is 30sec. Note: Even though port profile is attached to VM or not, the port profile will be deleted in the vCenter for Force Delete Network. Output of this task contains DCNM Account, Fabric Organization and Fabric Partition.
Inputs
Input Description Mappable To Type Mandatory
Segment Id Select Segment Id Fabric​Network​Identity Y
Force Delete Network Delete Network even is VM attached
No Of Retry No of retry to delete port group gen_​text_​input
Retry Interval(In Sec) Retry interval to delete port group gen_​text_​input
Outputs
Output Description Type
OUTPUT_​ACCOUNT_​ID Identity of the DCNM Account for which the selected operation was performed DCNMAccount​Identity
OUTPUT_​ACCOUNT_​NAME Name of the Account for which the selected operation was performed gen_​text_​input
OUTPUT_​ORGANIZATION_​ID Identity of the organization for which the selected operation was performed Fabric​Organization​Identity
OUTPUT_​ORGANIZATION_​NAME Name of the organization for which the selected operation was performed gen_​text_​input
OUTPUT_​PARTITION_​ID Identity of the partition for which the selected operation was performed Fabric​Partition​Identity
OUTPUT_​PARTITION_​NAME Name of the partition for which the selected operation was performed gen_​text_​input

Delete Cisco DCNM Fabric Organization

Summary
This task Deletes Fabric Organization contains Fabric Organization and DCNM Account as Output.
Description
This task allows user to Delete Fabric Organization. The deletion of Fabric Organization can be possible if there are no Fabric Partition and Fabric Network under it. Output of this task contains the DCNM Account.
Inputs
Input Description Mappable To Type Mandatory
Organization Name Select Organization Name Fabric​Organization​Identity Y
Outputs
Output Description Type
OUTPUT_​ACCOUNT_​ID Identity of the DCNM Account for which the selected operation was performed DCNMAccount​Identity
OUTPUT_​ACCOUNT_​NAME Name of the Account for which the selected operation was performed gen_​text_​input

Delete Cisco DCNM Fabric Partition

Summary
This task Delete Fabric Partition contains Fabric Partition,DCNM Account and Fabric Organization as Output.
Description
This task allows user to delete Fabric Partition. The Fabric Partition should be deleted if there are no Fabric Networks associated with it. Output of this task contains the DCNM Account and Fabric Organization.
Inputs
Input Description Mappable To Type Mandatory
Partition Name Select Partition Name Fabric​Partition​Identity Y
Outputs
Output Description Type
OUTPUT_​ACCOUNT_​ID Identity of the DCNM Account for which the selected operation was performed DCNMAccount​Identity
OUTPUT_​ACCOUNT_​NAME Name of the Account for which the selected operation was performed gen_​text_​input
OUTPUT_​ORGANIZATION_​ID Identity of the organization for which the selected operation was performed Fabric​Organization​Identity
OUTPUT_​ORGANIZATION_​NAME Name of the organization for which the selected operation was performed gen_​text_​input

Delete VDC-Cisco DCNM Fabric Switch Association

Summary
This task Deletes VDC Fabric Switch Association Policy
Description
This task allows user to Delete VDC Fabric Switch Association.VDC Fabric Switch association removed from the Fabric VDC Switch Association Policy Report.
Inputs
Input Description Mappable To Type Mandatory
VDC Fabric Switch Association Select Association Fabric​Vdc​Switch​Mapping​Identity Y
Outputs
No Outputs

Extend Cisco DCNM Fabric Network Switch Association

Summary
This task Enables Fabric Network Switch Association contains Port groups for a Fabric Network as Output.
Description
This task allows user to Enable Fabric Network Switch Association, this task creates the Fabric Port groups for the selected Fabric Network in the Fabric Port Group Report. For all the created Port groups the Vlan ID should be same as the Selected Fabric Network. If the Selected Switch is from other cloud Account with respect to the selected Fabric Network, then a new Fabric Network should be created along with the Port group. Also if the selected Switches are multiple with the other cloud Account then a New Fabric Network should be created and remaining other cloud Account switches corresponding port groups should be created. Created portgroups vlanId is same in specific cloud.vlanId is not available on selected switch in a specific cloud task fails. Output of this task contains VLAN ID and Port group Details. Note: User can only select a Single vSwitch/dvSwitch Switch for map to user input.Enabling the N1K switch is not applicable.
Inputs
Input Description Mappable To Type Mandatory
Select Network Select the Network.​ Fabric​Network​Identity Y
Switch Type Select Switch Type Fabric​Network​Switch​Type
Select dv​Switch Select dv​Switch.​ Fabricdv​Switch​Identity Y
Mobility Domain Id Select mobility domain Fabric​Mobility​Domain​Identity
Use global mobility domain Use global mobility domain
Outputs
Output Description Type
OUTPUT_​VLAN_​ID Id of the vlan which will be maped vlan​ID
OUTPUT_​PORT_​GROUP_​IDENTITY Identity of the port group for which the selected operation was performed vmware​Vm​Port​Group​Identity
OUTPUT_​PORT_​GROUP_​NAME Created port group name for which the selected operation was performed port​Group​Name

Modify Cisco DCNM Fabric Mobility Domain

Summary
This task Modifies Fabric Mobility Domain.Contains MobilityDomain ID and MobilityDomain Identity as Output.
Description
This task allows user to Modify Fabric Mobility Domain.
Inputs
Input Description Mappable To Type Mandatory
Mobility​Domain Name Select Mobility​Domain Name Fabric​Mobility​Domain​Identity Y
VLAN Range Enter VLAN Range gen_​text_​input Y
Outputs
Output Description Type
OUTPUT_​MOBILITY_​DOMAIN_​ID Mobility Domain for which the selected operation was performed gen_​text_​input
OUTPUT_​MOBILITY_​DOMAIN_​IDENTITY Mobility Domain identity for which the selected operation was performed Fabric​Mobility​Domain​Identity

Modify Cisco DCNM Fabric Network

Summary
This task Modifies Fabric Network contains Fabric Network as Output.
Description
This task allows user to modify any of the network information which is created. Modified Fabric Network information should be displayed in the Fabric Network Report and Fabric Network Config Profile Report contains the information about the Profile associated with this Fabric Network. For start ip and end ip the following scenarios are applicable in modify Fabric network: a.Default gateway = 1.1.1.1, DHCP range is 1.1.1.2-1.1.1.10, then static range should be staticIpStart=1.1.1.11, staticIpEnd=1.1.1.254 b. Default gateway =1.1.1.1, DHCP range is unspecified, then static range should be staticIpStart=1.1.1.2, staticIpEnd=1.1.1.254 c. Default gateway = 1.1.1.10, DHCP range is 1.1.1.11-1.1.1.19, then static range should be staticIpStart=1.1.1.20, staticIpEnd=1.1.1.254 OR staticIpStart=1.1.1.1, staticIpEnd=1.1.1.9 d. Default gateway = 1.1.1.1, DHCP range is 1.1.1.2-1.1.1.254, then static range should be BLANK. e. If the startip and end ip are specified in the task then the values should be persist. While calculating the ip range or static ip range it should assign max IP available part. Note: The parameters Network Role, Secondary Gateway IP address are dependent on the DCNM Account Version and should be displayed as empty when the underlying DCNM Account version doesnât support these.
Inputs
Input Description Mappable To Type Mandatory
Network Name Enter Network Name gen_​text_​input Y
Network Role Enter Network Role Fabric​Network​Role Y
Network Id
Segment Id Select Segment ID Fabric​Network​Identity Y
Vlan Enter vlan
Mobility Domain Enter Mobility​Domain
Description Enter Description gen_​text_​input
Gateway IP Address Enter Gateway IP Address ipv4Address
Subnet Mask Enter Subnet Mask subnet​Mask
Profile Name Select Profile Name Fabric​Network​Profile​Identity Y
Profile Parameters
DHCP Server Address Enter Profile dhcp​Server​Address ipv4Address
vrf​Dhcp Enter vrf​Dhcp gen_​text_​input
mtu​Value Enter mtu​Value gen_​text_​input
dhcp​Serverv6Address Enter dhcp​Serverv6Address gen_​text_​input
vrfv6Dhcp Enter vrfv6Dhcp gen_​text_​input
IPv6 enabled Enable Ipv6
Gateway IPv6 Address Enter Profile gateway​Ipv6Address gen_​text_​input
Prefix Length Enter Profile prefix​Length gen_​text_​input
DHCP Scope
DHCP enabled Enable DHCP
IP Range Enter IP Range gen_​text_​input
Service Configuration Parameters
Start IP Enter Start IP ipv4Address
End IP Enter End IP ipv4Address
Secondary Gateway Enter Secondary Gateway ipv4Address
Outputs
Output Description Type
OUTPUT_​ACCOUNT_​ID Identity of the DCNM Account for which the selected operation was performed DCNMAccount​Identity
OUTPUT_​ACCOUNT_​NAME Name of the Account for which the selected operation was performed gen_​text_​input
OUTPUT_​ORGANIZATION_​ID Identity of the organization for which the selected operation was performed Fabric​Organization​Identity
OUTPUT_​ORGANIZATION_​NAME Name of the organization for which the selected operation was performed gen_​text_​input
OUTPUT_​PARTITION_​ID Identity of the partition for which the selected operation was performed Fabric​Partition​Identity
OUTPUT_​PARTITION_​NAME Name of the partition for which the selected operation was performed gen_​text_​input
OUTPUT_​NETWORK_​ID Identity of the network for which the selected operation was performed Fabric​Network​Identity
OUTPUT_​NETWORK_​NAME Name of the network for which the selected operation was performed gen_​text_​input
OUTPUT_​NETWORK_​SEGMENTID Identity of the network segment for which the selected operation was performed Fabric​Network​Segment​Pool​Identity
OUTPUT_​PROFILE_​ID Identity of the profile for which the selected operation was performed Fabric​Network​Profile​Identity
OUTPUT_​PROFILE_​NAME Name of the profile for which the selected operation was performed Fabric​Network​Profile​Identity

Modify Cisco DCNM Fabric Organization

Summary
This task Modifies Fabric Organization contains Fabric Organization as Output.
Description
This task allows user to Modify Fabric Organization with a change in the description. Output of this task contains the DCNM Account, Fabric Organization.
Inputs
Input Description Mappable To Type Mandatory
Organization Name Select Organization Name Fabric​Organization​Identity Y
Description Enter Organization Description gen_​text_​input
Orchestration Source Enter Orchestration Source
Group User Group
Outputs
Output Description Type
OUTPUT_​ACCOUNT_​ID Identity of the DCNM Account for which the selected operation was performed DCNMAccount​Identity
OUTPUT_​ACCOUNT_​NAME Name of the Account for which the selected operation was performed gen_​text_​input
OUTPUT_​ORGANIZATION_​ID Identity of the organization for which the selected operation was performed Fabric​Organization​Identity
OUTPUT_​ORGANIZATION_​NAME Name of the organization for which the selected operation was performed gen_​text_​input

Modify Cisco DCNM Fabric Partition

Summary
This task Modifies Fabric Partition contains Fabric Partition and Outputs as DCNM Account, Fabric Organization, Fabric Partition.
Description
This task allows user to Modify Fabric Partition with a change in the description, DCI ID, Extend the partition across Fabric, Service Node IP Address, DNS Server, Secondary DNS Server and Multi cast Group Address, Profile name and BroderLeafRt. Based on the Fabric Encapsulation the profile Name will be displayed. If Extend the Partition across Fabric is Enabled then DCI id is mandatory and in the DCNM corresponding configurations should be done. Output of this task contains the DCNM Account details, Fabric Organization and Fabric Partition. Note: The parameters DCI ID, Multi Cast Group Address and profile Parameters are applicable for only Version 7.1(0.139) or higher version. If the Profile Name is None then profile Parameters will not be displayed where as if profile Name is other than Non-None then only BorderLeafRt will be displayed. All Higher version parameters are optional and in the lower version DCNM in UCSD will display as empty. IF Extend the Partition across Fabric then profile Name should be Non-None.
Inputs
Input Description Mappable To Type Mandatory
Partition Name Enter Partition Name Fabric​Partition​Identity Y
Description Enter Description gen_​text_​input
DCI ID Enter DCI ID gen_​text_​input
Extend the Partition Across the Fabric Extend the Partition Across the Fabric
Service Node IP Address Enter Service Node IP Address ipv4Address
DNS Server Enter DNS Server ipv4Address
Secondary DNS Server Enter Secondary DNS Server ipv4Address
Multi Cast Group Address Enter Multi Cast Group Address ipv4Address
Profile Name Enter Profile Name Fabric​Partition​Profile​Identity
Profile Parameters
Border Leaf​Rt Enter Border Leaf​Rt gen_​text_​input
Outputs
Output Description Type
OUTPUT_​ACCOUNT_​ID Identity of the DCNM Account for which the selected operation was performed DCNMAccount​Identity
OUTPUT_​ACCOUNT_​NAME Name of the Account for which the selected operation was performed gen_​text_​input
OUTPUT_​ORGANIZATION_​ID Identity of the organization for which the selected operation was performed Fabric​Organization​Identity
OUTPUT_​ORGANIZATION_​NAME Name of the organization for which the selected operation was performed gen_​text_​input
OUTPUT_​PARTITION_​ID Identity of the partition for which the selected operation was performed Fabric​Partition​Identity
OUTPUT_​PARTITION_​NAME Name of the partition for which the selected operation was performed gen_​text_​input

Remove Cisco DCNM Extended Fabric Network Switch Association

Summary
This task Disables Fabric Network Switch Association allows user to delete the Fabric port group.
Description
This task allows user to Disable Fabric Network Switch Association. Fabric Port group created by using Enable should be deleted. If user try to disable Fabric Network Switch Association and selected port group is directly associated with a network then this task fails. To delete such association, user has to delete the corresponding network.
Inputs
Input Description Mappable To Type Mandatory
Select Port Group Select Network Switch mapping Fabric​Network​Switch​Mapping​Identity Y
Outputs
No Outputs