NetApp clustered Data ONTAP Tasks

This chapter contains the following sections:

Accept NetApp Cluster SVM Peer

Summary
Accept the SVM peer relationship is in pending state
Description
This task will accept the SVM peer relationship which is in pending state.
Inputs
Input Description Mappable To Type Mandatory
Select SVM Peer relationship id Choose an SVM relationship ID with which to accept a peer relationship netapp​Source​Cluster​VServer​Peer​Identity Y
Outputs
Output Description Type
OUTPUT_​SOURCE_​CLUSTER_​VSERVER_​PEER_​RELATIONSHIP_​IDENTITY Identity of the source cluster SVM peer relationship netapp​Source​Cluster​VServer​Peer​Identity
OUTPUT_​DESTINATION_​CLUSTER_​VSERVER_​PEER_​RELATIONSHIP_​IDENTITY Identity of the destination cluster SVM peer relationship netapp​Destination​Cluster​VServer​Peer​Identity

Actions on NetApp SnapMirror Relationship

Summary
Performs actions on snapmirror relationship between two SVM volumes
Description
This task will perform the actions Initialize/Break/Quiesce/Promote/Release/Resume on the SnapMirror relationship of type Data Protection between a source and destination volumes.
Inputs
Input Description Mappable To Type Mandatory
Select Snap​Mirror Relationship Choose a Snapmirror relationship to initialize Net​App​Cluster​Snapmirror​Relation​Identity Y
Select Action Type Choose the action type to perform gen_​text_​input
Transfer Priority Choose the transfer priority gen_​text_​input
Maximum Transfer Rate (kbps) Enter the maximum transfer rate.​ Default is 0, which specifies an unlimited transfer rate.​ gen_​text_​input
Outputs
Output Description Type
OUTPUT_​CLUSTER_​SNAPMIRROR_​RELATIONSHIP_​IDENTITY Identity of the snapmirror relationship Net​App​Cluster​Snapmirror​Relation​Identity

Add Disk to NetApp Cluster Aggregate

Summary
Assign disk(s) to the aggregate.
Description
The available spare disk(s) can be assigned to an aggregrate.
Inputs
Input Description Mappable To Type Mandatory
Aggregate Name Choose the aggregate on which disks are to be added aggregate​Cluster​Identity Y
Disk Name Choose one or more disks to be added to the aggregate netapp​Cluster​Disk​Identity Y
Outputs
Output Description Type
OUTPUT_​CLUSTER_​AGGREGATE_​NAME Name of the Cluster Aggregate.​ netapp​Cluster​Aggregate​Name
OUTPUT_​CLUSTER_​AGGREGATE_​IDENTITY Identity of the Cluster Aggregate aggregate​Cluster​Identity

Add License to NetApp Cluster

Summary
Apply license to the Cluster.
Description
Add license for a data ONTAP services.
Inputs
Input Description Mappable To Type Mandatory
Account Name Choose the cluster to which the license is to be added Cluster​Filer​Identity Y
License Code Enter the license code gen_​text_​input Y
Outputs
Output Description Type
OUTPUT_​NETAPP_​CLUSTER_​FILER_​IDENTITY Identity of the Net​App Cluster Filer Cluster​Filer​Identity

Add NetApp Cluster SnapMirror Policy Rule

Summary
Add a new rule to cluster snapmirror policy
Description
This task will add a new rule to the snapmirror policy.
Inputs
Input Description Mappable To Type Mandatory
Select Policy Choose a policy name Net​App​Cluster​Snapmirror​Policy​Identity Y
Snapshot Copy Retention Count Enter the snapshot copy retention count gen_​text_​input Y
Snapmirror Label Enter the snapshot copy label gen_​text_​input Y
Preserve Check to enable snapshot copy preserve
Warning Threshold Count Enter the warning threshold count gen_​text_​input
Outputs
Output Description Type
OUTPUT_​CLUSTER_​SNAPMIRROR_​POLICY_​RULE_​IDENTITY Identity of the snapmirror policy rule Net​App​Cluster​Snapmirror​Policy​Rule​Identity

Add Port to NetApp Cluster Interface Group

Summary
Adds an existing port to interface group on the node under cluster context.
Description
This task will adds a network port to a port interface group. The port interface group must already exist.
Inputs
Input Description Mappable To Type Mandatory
Interface Group Name Choose the interface group to which to add a port netapp​Cluster​Inf​Group​Identity Y
Port Name Choose a port to be added to the interface gen_​text_​input Y
Outputs
Output Description Type
OUTPUT_​CLUSTER_​PORT_​GROUP_​IDENTITY Identity of the cluster interface group.​ netapp​Cluster​Inf​Group​Identity
OUTPUT_​CLUSTER_​NODE_​NAME Name of the cluster node.​ netapp​Cluster​Node​Name
OUTPUT_​CLUSTER_​IFGRP_​NAME Name of the cluster If​Group name.​ netapp​Cluster​Port​Assoc​If​Group​Name
OUTPUT_​INTERFACE_​PORT_​NAME Name of the If​Group Port name.​ gen_​text_​input

Associate NetApp Cluster Volume as NFS Datastore

Summary
Associates Cluster Volume as NFS Datastore
Description
This task will associate the selected volume as nfs datastore
Inputs
Input Description Mappable To Type Mandatory
LIF Identity Choose an LIF identity netapp​Cluster​LIFIdentity Y
Target Resource Type Choose a target VMware resource type netapp​Cluster​Vol​Nfs​Datastore​Resource​Type Y
Hostnode Choose a hostnode vmware​Host​Multi​Select Y
VMware Cluster Identity Choose a VMware cluster vmware​Cluster​Identity Y
NFS Path Enter the NFS path gen_​text_​input Y
Datastore Name Enter the datastore name gen_​text_​input
Access Mode Choose an access mode netapp​Cluster​Vol​Nfs​Datastore​Access​Mode Y
Success Criteria Choose a success criteria netapp​Cluster​Vol​Nfs​Datastore​Success​Criteria Y
Outputs
Output Description Type
OUTPUT_​DATASTORE_​NAME Datastore name data​Store​Name
OUTPUT_​HOST_​NAME Host Name vm​Host
OUTPUT_​VMWARE_​ACCOUNT_​NAME VMware account name.​ gen_​text_​input
OUTPUT_​VMWARE_​DATASTORE_​IDENTITY Datastore name identity vmware​Datastore​Identity
OUTPUT_​VMWARE_​DATASTORE_​INFO_​IDENTITY Datastore Info identity gen_​text_​input
OUTPUT_​VMWARE_​HOST_​NODE_​IDENTITY VMware Host Node Identity vmware​Host​Node​Identity
OUTPUT_​VMWARE_​HOST_​NODE_​NAME Host Node Name.​ vmware​Host​Multi​Select
OUTPUT_​VM_​PROVISIONING_​DATASTORE_​IDENTITY VM Provisioning Datastore Identity vmware​Datastore​Identity

Clone NetApp Cluster Flexible Volume

Summary
Creates Cluster clone volume
Description
This task will create clone volume from the selected parent volume.
Inputs
Input Description Mappable To Type Mandatory
Volume Name Enter a name for the clone volume gen_​text_​input Y
Parent Volume Choose the volume to be cloned netapp​Cluster​Volume​Identity Y
Parent Snapshot Choose a snapshot of the volume to be used for the clone netapp​Cluster​Volume​Snapshot​Identity
Outputs
Output Description Type
OUTPUT_​CLUSTER_​VSERVER_​IDENTITY Identity of the cluster SVM netapp​Cluster​VServer​Identity
OUTPUT_​CLUSTER_​VOLUME_​IDENTITY Identity of the cluster Volume netapp​Cluster​Volume​Identity

Configure NetApp Cluster QOS Policy Group

Summary
Assign or unassign a QOS policy group to a cluster LUN or volume.
Description
This task assigns a QOS policy group to a NetApp cluster LUN or to a volume. If no QOS policy group is specified then the LUN or volume is unassociated from its QOS policy groups.
Inputs
Input Description Mappable To Type Mandatory
Storage Resource Type Choose the type of storage resource on which you want to configure the QOS policy group NETAPP_​CLUSTER_​QOS_​STORAGE_​RESOURCE_​TYPE
Volume Choose the volume on which to configure the QOS policy group netapp​Cluster​Volume​Identity Y
LUN Choose the LUN on which to configure the QOS policy group netapp​Cluster​LUNIdentity Y
QOS Policy Group Choose the QOS policy group with which to configure the LUN or volume.​ If this field is left empty QOS policy group is unassigned from the LUN or volume.​ NETAPP_​CLUSTER_​QOS_​POLICY_​GROUPS_​IDENTITY
Outputs
Output Description Type
OUTPUT_​CLUSTER_​LUN_​IDENTITY Identity of the cluster LUN netapp​Cluster​LUNIdentity
OUTPUT_​CLUSTER_​VOLUME_​IDENTITY Identity of the cluster Volume netapp​Cluster​Volume​Identity
OUTPUT_​NETAPP_​CLUSTER_​QOS_​POLICY_​GROUP_​IDENTITY Identity of the cluster QOS policy group.​ NETAPP_​CLUSTER_​QOS_​POLICY_​GROUPS_​IDENTITY
OUTPUT_​NETAPP_​CLUSTER_​VSERVER_​IDENTITY Net​App Cluster SVM Identity netapp​Cluster​VServer​Identity
OUTPUT_​NETAPP_​CLUSTER_​QOS_​STORAGE_​RESOURCE_​TYPE Type of storage resource for the QOS policy group NETAPP_​CLUSTER_​QOS_​STORAGE_​RESOURCE_​TYPE

Create NetApp Cluster Aggregate

Summary
Creation of the aggregate.
Description
This task will create an aggregrate.
Inputs
Input Description Mappable To Type Mandatory
Account Name Choose a Net​App account in which to create the aggregate Cluster​Filer​Identity Y
Aggregate Name Enter an aggregate name netapp​Aggregate​Name Y
Disk Count Enter the number of disks gen_​text_​input Y
Node Name Choose a node on which to create the aggregate netapp​Cluster​Node​Identity
Disk List Choose one or more disks to be aggregated netapp​Cluster​Disk​Identity
Raid Type Choose a RAID type netapp​Cluster​Raid​Type
Outputs
Output Description Type
OUTPUT_​CLUSTER_​AGGREGATE_​NAME Name of the Cluster Aggregate.​ netapp​Cluster​Aggregate​Name
OUTPUT_​NETAPP_​CLUSTER_​FILER_​IDENTITY Identity of the Net​App Cluster Filer Cluster​Filer​Identity
OUTPUT_​CLUSTER_​AGGREGATE_​IDENTITY Identity of the Cluster Aggregate aggregate​Cluster​Identity

Create NetApp Cluster Broadcast Domain

Summary
Description
Inputs
Input Description Mappable To Type Mandatory
Account Name Choose a Net​App C mode account on which to create a broadcast domain netapp​Cluster​Selected​Account​Identity
Broadcast Domain Name Enter a name for the broadcast domain gen_​text_​input Y
Maximum Transmission Unit (MTU) Enter the maximum transmission unit for IP packets gen_​text_​input Y
Port Choose one or more ports to be added to the broadcast domain netapp​Cluster​All​Ports​Identity
IPSpace Name Choose the IP name space to which to add the broadcast domain netapp​Cluster​IPSpace​Identity
Outputs
Output Description Type
OUTPUT_​CLUSTER_​BROADCAST_​DOMAIN_​NAME_​IDENTITY Broadcast Domain List Identity netapp​Cluster​Broadcast​Domain​List​Identity
OUTPUT_​CLUSTER_​BROADCAST_​DOMAIN_​NAME Name of the Broadcast Domain netapp​Cluster​Broadcast​Domain​Name
OUTPUT_​CLUSTER_​ALL_​PORT_​NAMES Name of the Port.​ netapp​Cluster​All​Ports​Identity

Create NetApp Cluster Cron Job Schedule

Summary
Creation of cron job schedule.
Description
This task will create a new cron job schedule entry.
Inputs
Input Description Mappable To Type Mandatory
Account Name Choose an account name in which to create a cron job schedule netapp​Cluster​Node​Identity Y
Job Schedule Name Enter a cron job schedule name gen_​text_​input Y
Day of Month Enter one or more day of the month.​ Separate days of the month with commas.​ gen_​text_​input
Day of Week Enter one or more day of the week.​ Separate days of the week with commas.​ gen_​text_​input
Hour Enter one or more hour.​ Separate hours with commas.​ gen_​text_​input
Minute Enter one or more minute.​ Separate minutes with commas.​ gen_​text_​input Y
Month Enter one or more month.​ Separate months with commas.​ gen_​text_​input
Outputs
Output Description Type
OUTPUT_​CLUSTER_​CRON_​JOB_​SCHEDULE_​IDENTITY Identity of the cron job schedule.​ Net​App​Cluster​Cron​Job​Identity

Create NetApp Cluster FCP Service

Summary
Creates FCP service for SVM
Description
This task will create FCP service for a selected SVM. If the SVM is associated with a single LIF then the WWNN of the FCP service will be same as the WWNN of the LIF. If the SVM is associated with multiple LIFS then an unique WWNN is autogenerated for the FCP service. If an unique WWNN is provided in the "FCP Target Node Name" field then the default WWNN of the FCP service is replaced by the user provided input.
Inputs
Input Description Mappable To Type Mandatory
SVM Name Choose an SVM name for which to create the FCP service netapp​Cluster​VServer​Identity Y
FCP Target Node Name Enter the FCP target node name for the SVM in WWNN format gen_​text_​input
Start Leave checked to automatically start the service after creation completes netapp​Cluster​FCPService​Is​Available
Outputs
Output Description Type
OUTPUT_​CLUSTER_​VSERVER_​IDENTITY Identity of the cluster SVM netapp​Cluster​VServer​Identity
OUTPUT_​CLUSTER_​FCP_​SERVICE_​IDENTITY Identity of the Net​App Cluster FCP Service netapp​Cluster​FCPService​Identity
OUTPUT_​CLUSTER_​FCP_​NODE_​NAME Node Name of Net​App Cluster FCP Service gen_​text_​input

Create NetApp Cluster IPSpace

Summary
Create a new IP Space.
Description
Creates a new IP Space with the given name in specified filer. This task will work for both ONTAP and OnCommand accounts.
Inputs
Input Description Mappable To Type Mandatory
Filer Identity Name Choose a Net​App filer on which to create an IP space Cluster​Filer​Identity Y
IPSpace Name Enter a name for the IP space gen_​text_​input Y
Outputs
Output Description Type
OUTPUT_​NETAPP_​CLUSTER_​IPSPACE_​NAME Name of the Net​App cluster IPSpace.​ netapp​Cluster​IPSpace​Name
OUTPUT_​NETAPP_​CLUSTER_​IPSPACE_​IDENTITY Net​App cluster IPSpace Identity.​ netapp​Cluster​IPSpace​Identity
OUTPUT_​FILER_​IDENTITY Identity of the Filer filer​Identity

Create NetApp Cluster Interface Group

Summary
Creates a new Interface group on the node under cluster context.
Description
This task will creates a new port interface group for the selected node under the cluster context.
Inputs
Input Description Mappable To Type Mandatory
Node Name Choose the node on which the interface group is to be created netapp​Cluster​Node​Identity Y
Interface Group Name Enter the name of the interface group gen_​text_​input Y
Distribution Function Choose a load balancing method for the interface group gen_​text_​input
Create Policy Choose the create policy for the interface group gen_​text_​input Y
Outputs
Output Description Type
OUTPUT_​CLUSTER_​PORT_​GROUP_​IDENTITY Identity of the cluster interface group.​ netapp​Cluster​Inf​Group​Identity
OUTPUT_​CLUSTER_​NODE_​NAME Name of the cluster node.​ netapp​Cluster​Node​Name
OUTPUT_​CLUSTER_​NODE_​IDENTITY Identity of the cluster node.​ netapp​Cluster​Node​Identity
OUTPUT_​CLUSTER_​IFGRP_​NAME Name of the cluster If​Group name.​ netapp​Cluster​Port​Assoc​If​Group​Name

Create NetApp Cluster Logical Interface

Summary
Creates a new Logical Interface to a SVM.
Description
This task will create a Logical Interface(LIF) for the slected SVM. A logical interface is an IP address associated with a physical network port. In the event of component failures, a logical interface can fail over or be migrated to a different physical port, thereby continuing to provide network access despite the component failure.
Inputs
Input Description Mappable To Type Mandatory
Role Choose the role of the logical interface gen_​text_​input Y
SVM Name Choose an SVM to associate with the interface netapp​Cluster​VServer​Identity Y
Home Node Choose the home node for the interface netapp​Cluster​Node​Identity Y
Allowed Protocols Choose the allowed protocols on the the interface NETAPP_​CLUSTER_​PROTOCOL_​LIST
Home Port Choose the home port for the interface gen_​text_​input Y
Logical Interface Name Enter a name for the logical interface gen_​text_​input
IP Address Enter an IP address for the logical interface gen_​text_​input Y
Subnetmask Enter the subnet mask of the IP address gen_​text_​input Y
Failover Policy Choose a failover group for the LIF gen_​text_​input
Use Failover Group Choose whether to create the failover rules automatically or manually gen_​text_​input
Failover Group Name Choose the failover rules if they are to be manually specified by the administrator gen_​text_​input Y
Outputs
Output Description Type
OUTPUT_​CLUSTER_​LOGICAL_​INF_​IDENTITY Identity of the cluster Logical interface netapp​Cluster​LIFIdentity
OUTPUT_​CLUSTER_​NODE_​NAME Name of the cluster node.​ netapp​Cluster​Node​Name
LIF_​IP_​ADDRESS IP Address of the LIF gen_​text_​input
OUTPUT_​CLUSTER_​FCP_​PORT_​NAME Name of the cluster fcp port(wwpn).​ gen_​text_​input
OUTPUT_​CLUSTER_​NODE_​IDENTITY Identity of the cluster node.​ netapp​Cluster​Node​Identity
OUTPUT_​ACCOUNT_​IDENTITY Identity of the Account gen_​text_​input
ACCOUNT_​NAME Name of the Account on which the selected operation was performed netapp​Account​Name
OUTPUT_​CLUSTER_​LOGICAL_​INF_​NAME Name of the Cluster Logical interface netapp​Cluster​LIFName
OUTPUT_​CLUSTER_​SVM_​IDENTITY Identity of the SVM netapp​Cluster​VServer​Identity
OUTPUT_​CLUSTER_​PORT Name of the cluster port.​ gen_​text_​input

Create NetApp Cluster NFS Service

Summary
Creates NFS service for SVM
Description
This task will create nfs service for a selected SVM
Inputs
Input Description Mappable To Type Mandatory
SVM Name Choose an SVM name for which to create the NFS service netapp​Cluster​VServer​Identity Y
Is NFS Access Enabled Check to enable NFS access gen_​text_​input
Is Vstorage Enabled Check to enable Vstorage gen_​text_​input
Outputs
Output Description Type
OUTPUT_​CLUSTER_​VSERVER_​IDENTITY Identity of the cluster SVM netapp​Cluster​VServer​Identity
OUTPUT_​CLUSTER_​NFS_​SERVICE_​IDENTITY Identity of the cluster NFS Service netapp​Cluster​Nfs​Service​Identity

Create NetApp Cluster Peer

Summary
Creates a new cluster peer relationship
Description
This task will create a new cluster peer relationship between two existing inter clusters.
Inputs
Input Description Mappable To Type Mandatory
Select cluster Choose a cluster with which to create a peer relationship netapp​Cluster​Account​Identity Y
Select peer inter clusters Choose the inter clusters netapp​Cluster​LIFIdentity Y
Time out (seconds) Enter the timeout value.​ Default timeout value is 15 seconds.​
Outputs
Output Description Type
OUTPUT_​CLUSTER_​PEER_​IDENTITY Identity of the cluster peer netapp​Cluster​Peer​Identity

Create NetApp Cluster QOS Policy Group

Summary
Create a QOS policy group on a NetApp cluster SVM.
Description
This task creates a QOS policy group on a NetApp cluster SVM which later can be assigned to LUNs and volumes inside the SVM. A QOS policy group without a maximum throughput value allows unlimited throughput.
Inputs
Input Description Mappable To Type Mandatory
SVM Name Select SVM Name netapp​Cluster​VServer​Identity Y
QOS Policy Group Name Enter the name of the QOS policy group gen_​text_​input
Maximum Throughput Enter the maximum throughput value to be applied to the QOS policy group.​ Default value is unlimited.​ gen_​text_​input
Unit Of Throughput Select the unit of transfer for maximum throughput NETAPP_​CLUSTER_​QOS_​POLICY_​GROUP_​MAXIMUM_​THROUGHPUT_​UNIT
Outputs
Output Description Type
OUTPUT_​NETAPP_​CLUSTER_​QOS_​POLICY_​GROUP_​IDENTITY Identity of the cluster QOS policy group.​ NETAPP_​CLUSTER_​QOS_​POLICY_​GROUPS_​IDENTITY
OUTPUT_​NETAPP_​CLUSTER_​QOS_​POLICY_​GROUP_​MAXIMUM_​THROUGHPUT_​UNIT Unit of the maximum throughput for the QOS policy group NETAPP_​CLUSTER_​QOS_​POLICY_​GROUP_​MAXIMUM_​THROUGHPUT_​UNIT
OUTPUT_​NETAPP_​CLUSTER_​VSERVER_​IDENTITY Net​App Cluster SVM Identity netapp​Cluster​VServer​Identity

Create NetApp Cluster SVM

Summary
Creates a new Cluster SVM.
Description
This task will create a new SVM on one of the node in a cluster account.
Inputs
Input Description Mappable To Type Mandatory
Aggregate Name Choose an aggregate for which to create the root volume aggregate​Cluster​Identity Y
SVM Name Enter a name for the SVM gen_​text_​input
Root Volume Name Enter a name for the root volume volume
Name Service Switch Choose a name service switch netapp​Cluster​Vserver​Name​Service​Switch
Security Style Choose a security style for the root volume netapp​Cluster​Volume​Security​Style
Snapshot Policy Choose a snapshot policy for the root volume netapp​Cluster​Snapshot​Policy​Identity
Protocols Choose the protocols to be enabled on the SVM vserver​Protocol
NFS Service Start Check to start the NFS service on the SVM
IPspace Name Choose an IP spacename for the SVM netapp​Cluster​IPSpace​Identity
Outputs
Output Description Type
OUTPUT_​CLUSTER_​AGGREGATE_​NAME Name of the Cluster Aggregate.​ netapp​Cluster​Aggregate​Name
OUTPUT_​CLUSTER_​VSERVER_​IDENTITY Identity of the cluster SVM netapp​Cluster​VServer​Identity
OUTPUT_​CLUSTER_​SNAPSHOT_​POLICY_​IDENTITY Identity of the cluster snapshot policy netapp​Cluster​Snapshot​Policy​Identity
OUTPUT_​NETAPP_​CLUSTER_​FILER_​IDENTITY Identity of the Net​App Cluster Filer Cluster​Filer​Identity
OUTPUT_​CLUSTER_​VOLUME_​IDENTITY Identity of the cluster Volume netapp​Cluster​Volume​Identity
OUTPUT_​CLUSTER_​AGGREGATE_​IDENTITY Identity of the Cluster Aggregate aggregate​Cluster​Identity
OUTPUT_​CLUSTER_​DEFAULT_​EXPORT_​RULE_​IDENTITY Identity of Cluster Default Export Rule Index 1.​ netapp​Cluster​Export​Rule​Identity

Create NetApp Cluster SVM Peer

Summary
Creates a new SVM peer relationship
Description
This task will create a new SVM peer relationship between two existing SVMs.
Inputs
Input Description Mappable To Type Mandatory
Select Local SVM Name Choose a local SVM name with which to create a peer relationship (For example: Pod name@Account name@Cluster name@v​Server name) gen_​text_​input Y
Select Peer SVM Name Choose a peer SVM name with which to create a peer relationship (For example: Pod name@Account name@Cluster name@v​Server name) gen_​text_​input Y
Outputs
Output Description Type
OUTPUT_​CLUSTER_​VSERVER_​IDENTITY Identity of the cluster SVM netapp​Cluster​VServer​Identity
OUTPUT_​CLUSTER_​PEER_​VSERVER_​IDENTITY Identity of the cluster peer SVM gen_​text_​input
OUTPUT_​SOURCE_​CLUSTER_​VSERVER_​PEER_​RELATIONSHIP_​IDENTITY Identity of the source cluster SVM peer relationship netapp​Source​Cluster​VServer​Peer​Identity
OUTPUT_​DESTINATION_​CLUSTER_​VSERVER_​PEER_​RELATIONSHIP_​IDENTITY Identity of the destination cluster SVM peer relationship netapp​Destination​Cluster​VServer​Peer​Identity

Create NetApp Cluster iSCSI Service

Summary
Description
Inputs
Input Description Mappable To Type Mandatory
SVM Name Choose an SVM name for which to create the i​SCSI service netapp​Cluster​VServer​Identity Y
Alias Name Enter the i​SCSI target alias for the i​SCSI service gen_​text_​input
ISCSI Target Node Name Enter the i​SCSI target node name for the SVM.​ The name must start with the prefix "iqn".​ gen_​text_​input
Start Leave checked to automatically start the service after creation completes gen_​text_​input
Outputs
Output Description Type
OUTPUT_​CLUSTER_​VSERVER_​IDENTITY Identity of the cluster SVM netapp​Cluster​VServer​Identity
OUTPUT_​CLUSTER_​ISCSI_​SERVICE_​IDENTITY Identity of the cluster ISCSI Service netapp​Cluster​ISCSIService​Identity
OUTPUT_​CLUSTER_​ISCSI_​IQN_​NODE_​NAME Node Name of Net​App Cluster ISCSI Service gen_​text_​input

Create NetApp Cluster vLAN Interface

Summary
Attaches a VLAN to a network port on a specified node under cluster context.
Description
This task will attaches a VLAN to a network port on a specified node.
Inputs
Input Description Mappable To Type Mandatory
Port Name Choose a port name (For example: Pod name@Account name@Cluster name@Node name@Port name) gen_​text_​input Y
VLAN ID Enter the VLAN ID vlan​ID Y
Outputs
Output Description Type
OUTPUT_​CLUSTER_​PORT_​GROUP_​IDENTITY Identity of the cluster interface group.​ netapp​Cluster​Inf​Group​Identity
OUTPUT_​CLUSTER_​PORT_​NAME Name of the cluster port.​ netapp​Cluster​Port​Name
OUTPUT_​CLUSTER_​VLAN_​IDENTITY Identity of the cluster vlan.​ netapp​Clusterv​LANIdentity
OUTPUT_​CLUSTER_​ALL_​PORT_​NAMES Name of the Port.​ netapp​Cluster​All​Ports​Identity

Create NetApp FailOver Group

Summary
Description
Inputs
Input Description Mappable To Type Mandatory
Fail​Over Group Name Enter a name for the failover group gen_​text_​input Y
Port Choose a port for the failover group netapp​Cluster​All​Ports​Identity Y
Outputs
Output Description Type
OUTPUT_​CLUSTER_​FAIL_​OVER_​GROUP_​NAME Name of the Fail​Over Group netapp​Cluster​Fail​Over​Group​Name
OUTPUT_​CLUSTER_​FAIL_​OVER_​NODE_​NAME Name of the Node netapp​Cluster​Node​Identity
OUTPUT_​CLUSTER_​ALL_​PORT_​NAMES Name of the Port.​ netapp​Cluster​All​Ports​Identity
OUTPUT_​CLUSTER_​FAIL_​OVER_​GROUP_​IDENTITY Fail​Over Group Identity netapp​Cluster​Fail​Over​Group​List​Identity

Create NetApp SVM Routing Group Route

Summary
Create a new network routing group route.
Description
This task will create a new network routing group route.
Inputs
Input Description Mappable To Type Mandatory
SVM Name Choose an SVM for which to create a routing group netapp​Cluster​VServer​Identity Y
Gateway Address Enter the IP address of the gateway cluster​Gateway​Address Y
Destination Address Enter the IP address and subnet mask of the destination cluster​Destination​Address Y
Metric Enter the hop count for the routing group cluster​Metric
Outputs
Output Description Type
OUTPUT_​CLUSTER_​VSERVER_​IDENTITY Identity of the cluster SVM netapp​Cluster​VServer​Identity
OUTPUT_​CLUSTER_​ROUTING_​GROUP Specifies the name of the routing group.​ For example: d192.​168.​1.​0/24(d,c,n stands for data,cluster,node LIF and 192.​168.​1.​0/24 is subnet).​ cluster​Routing​Group
OUTPUT_​CLUSTER_​GATEWAY_​ADDRESS Specifies the IP address of gateway.​ For example: 192.​18.​0.​0 cluster​Gateway​Address
OUTPUT_​CLUSTER_​DESTINATION_​ADDRESS Specifies the IP address and subnet mask of destination.​ For example : 192.​168.​1.​0/24.​ cluster​Destination​Address
OUTPUT_​CLUSTER_​METRIC Specifies the metric(hop count) of the LIF.​ cluster​Metric

Create NetApp SVM SIS Policy

Summary
Creates a new SIS policy.
Description
This task will create a new SIS policy for SVM.
Inputs
Input Description Mappable To Type Mandatory
SVM Name Choose an SVM to create an SIS policy netapp​Cluster​VServer​Identity Y
SIS policy name Enter a name for the SIS policy cluster​Sis​Policy​Name​Text Y
Enabled Choose to enable or disable the SIS policy cluster​Sis​Enabled
QOS Policy Choose the QOS policy for SIS operations cluster​Sis​Qos​Policy
Duration Enter the length of time in hours for which to run the scheduled SIS operations cluster​Sis​Duration
Schedule Choose a cron job schedule to be used for the SIS operations cluster​Sis​Cron​Job​Schedule
Comment Enter a comment gen_​text_​input
Outputs
Output Description Type
OUTPUT_​CLUSTER_​VSERVER_​IDENTITY Identity of the cluster SVM netapp​Cluster​VServer​Identity
OUTPUT_​CLUSTER_​SIS_​POLICY_​NAME Name of the sis Policy.​ cluster​Sis​Policy​Name
OUTPUT_​CLUSTER_​SIS_​ENABLED To Enable/Disable sis policy.​ cluster​Sis​Enabled
OUTPUT_​CLUSTER_​SIS_​DURATION The duration in hours for which the scheduled sis operation should run.​ cluster​Sis​Duration
OUTPUT_​CLUSTER_​SIS_​QOS_​POLICY QOS Policy for the SIS operation.​ cluster​Sis​Qos​Policy
OUTPUT_​CLUSTER_​CRON_​JOB_​SCHEDULE Cron type job schedule name.​ cluster​Sis​Cron​Job​Schedule

Create NetApp SnapMirror Policy

Summary
Creates a new snapmirror policy on SVM
Description
This task will create a new SnapMirror policy on a SVM.
Inputs
Input Description Mappable To Type Mandatory
SVM Name Choose an SVM for which to create a Snapmirror policy netapp​Cluster​VServer​Identity Y
Enter Policy Name Enter a name for the Snapmirror policy gen_​text_​input Y
Restart Choose the type of restart netapp​Snapmirror​Restart​Type
Transfer Priority Choose the priority of the transfer netapp​Snapmirror​Transfer​Priority​Type
Enter Comment Enter a comment gen_​text_​input
Outputs
Output Description Type
OUTPUT_​CLUSTER_​SNAPMIRROR_​POLICY_​IDENTITY Identity of the snapmirror policy Net​App​Cluster​Snapmirror​Policy​Identity

Create NetApp SnapMirror Relationship

Summary
Creates a new snapmirror relationship between two SVM volumes
Description
This task will create a new SnapMirror relationship of type Data Protection between a source and destination volumes.
Inputs
Input Description Mappable To Type Mandatory
Destination Volume Choose a destination volume (For example: Pod name@Account name@Cluster name@SVM name@Volume name) gen_​text_​input Y
Relationship Type Choose a type of the Snapmirror relationship gen_​text_​input
Source Volume Choose a source volume (For example: Pod name@Account name@Cluster name@SVM name@Volume name) gen_​text_​input Y
Policy Choose a Snapmirror policy Net​App​Cluster​Snapmirror​Policy​Identity
Schedule Choose a cron job with which to schedule the Snapmirror update Net​App​Cluster​Cron​Job​Identity
Maximum Transfer Rate (kbps) Enter the maximum transfer rate.​ Default is 0, which specifies an unlimited transfer rate.​ gen_​text_​input
Outputs
Output Description Type
OUTPUT_​CLUSTER_​SNAPMIRROR_​DESTINATION_​VOLUME_​IDENTITY Identity of the snapmirror destination volume location gen_​text_​input
OUTPUT_​CLUSTER_​SNAPMIRROR_​SOURCE_​VOLUME_​IDENTITY Identity of the snapmirror source volume location gen_​text_​input
OUTPUT_​CLUSTER_​SNAPMIRROR_​RELATIONSHIP_​IDENTITY Identity of the snapmirror relationship Net​App​Cluster​Snapmirror​Relation​Identity

Delete CIFS on SVM

Summary
Delete a CIFS server.
Description
This task will Delete a CIFS server.If the admin-username and admin-password are not specified,the CIFS server's machine account will not be deleted from the Windows Active Directory domain.The deletion of the CIFS server will also delete the CIFS shares associated with it.
Inputs
Input Description Mappable To Type Mandatory
SVM Name Choose an SVM from which to delete CIFS server configuration netapp​Cluster​VServer​Identity Y
Admin User Enter the username of the account used to remove the CIFS server from the active directory cluster​Cifs​User​Name
Admin Password Enter the password of the account used to remove the CIFS server from the active directory cluster​Cifs​Pass​Word
Outputs
Output Description Type
OUTPUT_​CLUSTER_​VSERVER_​IDENTITY Identity of the cluster SVM netapp​Cluster​VServer​Identity
OUTPUT_​CLUSTER_​CIFS_​ADMIN_​USERNAME The username of the account used to add this CIFS server to Active Directory.​ cluster​Cifs​User​Name
OUTPUT_​CLUSTER_​CIFS_​ADMIN_​PASSWORD The password for the account used to add this CIFS server to Active Directory.​ cluster​Cifs​Pass​Word

Delete License from NetApp Cluster

Summary
Removes license to the Cluster.
Description
Removes license for the Data ONTAP services.
Inputs
Input Description Mappable To Type Mandatory
Account Name Choose a cluster from which the license is to be deleted Cluster​Filer​Identity Y
Package Choose a package from which to delete the license netapp​Cluster​License​List​Name Y
Node Serial Number Enter the serial number of the node associated with the license.​ If this parameter is not provided, the serial number defaults to the cluster serial number.​ gen_​text_​input
Outputs
No Outputs

Delete NetApp Cluster Aggregate

Summary
Destroying the cluster aggregate.
Description
This task will destroy the cluster aggregrate.
Inputs
Input Description Mappable To Type Mandatory
Aggregate Name Choose an aggregate to be deleted aggregate​Cluster​Identity Y
Outputs
No Outputs

Delete NetApp Cluster Broadcast Domain

Summary
Description
Inputs
Input Description Mappable To Type Mandatory
Account Name Choose a Net​App C mode account from which to delete a broadcast domain netapp​Cluster​Selected​Account​Identity Y
Broadcast Domain Name Enter the broadcast domain to be deleted gen_​text_​input Y
IPSpace Name Enter the name of the IP name space from which to delete the broadcast domain gen_​text_​input Y
Outputs
No Outputs

Delete NetApp Cluster Cron Job Schedule

Summary
Deleted the cron job schedule.
Description
This task will delete a cron job schedule entry.
Inputs
Input Description Mappable To Type Mandatory
Select Cron Job Schedule Name Choose a cron job schedule name to delete Net​App​Cluster​Cron​Job​Identity Y
Outputs
No Outputs

Delete NetApp Cluster IPSpace

Summary
Deletes an IP Space.
Description
Destroys selected IP Space. This task will work for both ONTAP and OnCommand accounts.
Inputs
Input Description Mappable To Type Mandatory
IPSPace Name Choose an IP space to be deleted netapp​Cluster​IPSpace​Identity Y
Outputs
Output Description Type
OUTPUT_​NETAPP_​CLUSTER_​IPSPACE_​NAME Name of the Net​App cluster IPSpace.​ netapp​Cluster​IPSpace​Name
OUTPUT_​NETAPP_​CLUSTER_​IPSPACE_​IDENTITY Net​App cluster IPSpace Identity.​ netapp​Cluster​IPSpace​Identity
OUTPUT_​FILER_​IDENTITY Identity of the Filer filer​Identity

Delete NetApp Cluster Interface Group

Summary
Deletes a Interface group on the node under cluster context.
Description
This task will destroys a port interface group. Before deleting a port interface group, remove all ports from it.
Inputs
Input Description Mappable To Type Mandatory
Interface Group Name Choose an interface group to be deleted netapp​Cluster​Inf​Group​Identity Y
Outputs
No Outputs

Delete NetApp Cluster Peer

Summary
Destroys peer relationship between two existing clusters
Description
This task will destroy the peering relationship between two clusters
Inputs
Input Description Mappable To Type Mandatory
Select Cluster Peer Name Choose a peer cluster name that has a peer relationship netapp​Cluster​Peer​Identity Y
Outputs
No Outputs

Delete NetApp Cluster QOS Policy Group

Summary
Delete an existing QOS policy group.
Description
This task deletes an existing QOS policy group from the NetApp cluster SVM. Deleting a QOS policy group with the force option checked deletes the workloads associated with the policy group as well as the policy group itself.
Inputs
Input Description Mappable To Type Mandatory
QOS Policy Group Select the QOS policy group to delete NETAPP_​CLUSTER_​QOS_​POLICY_​GROUPS_​IDENTITY Y
Force Check this box to delete the associated workloads along with the selected QOS policy group Boolean
Outputs
Output Description Type
OUTPUT_​NETAPP_​CLUSTER_​QOS_​POLICY_​GROUP_​IDENTITY Identity of the cluster QOS policy group.​ NETAPP_​CLUSTER_​QOS_​POLICY_​GROUPS_​IDENTITY
OUTPUT_​NETAPP_​CLUSTER_​VSERVER_​IDENTITY Net​App Cluster SVM Identity netapp​Cluster​VServer​Identity

Delete NetApp Cluster SVM Peer

Summary
Delete a SVM peer relationship
Description
This task will delete a SVM peer relationship between two existing SVMs.
Inputs
Input Description Mappable To Type Mandatory
Select SVM peer relationship id Choose an SVM peer relationship ID to delete the relationship (For example: Pod name@Account name@Cluster name@SVM@Peer SVM) gen_​text_​input Y
Force Check to force delete
Outputs
No Outputs

Delete NetApp Cluster vLAN Interface

Summary
Deletes a VLAN from a network port. under cluster context.
Description
This task will deletes a VLAN from a network port.
Inputs
Input Description Mappable To Type Mandatory
v​LAN Interface Choose a VLAN interface to be deleted netapp​Clusterv​LANIdentity Y
Outputs
No Outputs

Delete NetApp FailOver Group

Summary
Description
Inputs
Input Description Mappable To Type Mandatory
Fail​Over Group Name Choose a failover group to be deleted netapp​Cluster​Fail​Over​Group​List​Identity Y
Outputs
No Outputs

Delete NetApp SVM Routing Group Route

Summary
Deletes a network routing group route.
Description
This task will delete a network routing group route.
Inputs
Input Description Mappable To Type Mandatory
SVM Name Choose an SVM to delete a routing group netapp​Cluster​VServer​Identity Y
Destination Address Enter the IP address and subnet mask of the destination from which to delete the routing group cluster​Destination​Address Y
Outputs
Output Description Type
OUTPUT_​CLUSTER_​VSERVER_​IDENTITY Identity of the cluster SVM netapp​Cluster​VServer​Identity
OUTPUT_​CLUSTER_​ROUTING_​GROUP Specifies the name of the routing group.​ For example: d192.​168.​1.​0/24(d,c,n stands for data,cluster,node LIF and 192.​168.​1.​0/24 is subnet).​ cluster​Routing​Group
OUTPUT_​CLUSTER_​DESTINATION_​ADDRESS Specifies the IP address and subnet mask of destination.​ For example : 192.​168.​1.​0/24.​ cluster​Destination​Address

Delete NetApp SVM SIS Policy

Summary
Destroys a new SIS policy.
Description
This task will destroys a SIS policy for SVM.
Inputs
Input Description Mappable To Type Mandatory
SVM Name Choose an SVM from which to delete a SIS policy netapp​Cluster​VServer​Identity Y
SIS policy name Choose an SIS policy to be deleted cluster​Sis​Policy​Name Y
Outputs
Output Description Type
OUTPUT_​CLUSTER_​VSERVER_​IDENTITY Identity of the cluster SVM netapp​Cluster​VServer​Identity
OUTPUT_​CLUSTER_​SIS_​POLICY_​NAME Name of the sis Policy.​ cluster​Sis​Policy​Name

Delete NetApp SnapMirror Policy

Summary
Deletes a snapmirror policy on SVM
Description
This task will deelte a SnapMirror policy on a SVM.
Inputs
Input Description Mappable To Type Mandatory
Select Policy Choose a Snapmirror policy to be deleted Net​App​Cluster​Snapmirror​Policy​Identity
Outputs
No Outputs

Delete NetApp SnapMirror Relationship

Summary
Deletes a existing snapmirror relationship between two SVM volumes
Description
This task will delete a existing SnapMirror relationship of type Data Protection between a source and destination volumes.
Inputs
Input Description Mappable To Type Mandatory
Select Snapmirror Relationship Choose a Snapmirror relationship to delete Net​App​Cluster​Snapmirror​Relation​Identity Y
Outputs
No Outputs

Destroy NetApp Cluster FCP Service

Summary
Destroys FCP service for SVM
Description
This task will destroy FCP service for a selected SVM
Inputs
Input Description Mappable To Type Mandatory
FCP Service Choose a FCP service to be destroyed netapp​Cluster​FCPService​Identity Y
Force Check to forcibly destroy FCP service if it is in active state Boolean
Outputs
No Outputs

Destroy NetApp Cluster Logical Interface

Summary
Destroys a Logical Interface for the SVM.
Description
This task will destroys a Logical Interface(LIF) for the slected SVM. Once LIF can be destroyed, LIF can be no longer exist for the SVM.
Inputs
Input Description Mappable To Type Mandatory
Logical Interface Choose a logical interface to be deleted netapp​Cluster​LIFIdentity Y
Bring logical interface down before deleting Bring logical interface down before deleting
Outputs
No Outputs

Destroy NetApp Cluster NFS Service

Summary
Destroys NFS service for SVM
Description
This task will destroy nfs service for a selected SVM
Inputs
Input Description Mappable To Type Mandatory
NFS Service Choose an NFS service to be destroyed netapp​Cluster​VServer​Identity Y
Outputs
Output Description Type
OUTPUT_​CLUSTER_​VSERVER_​IDENTITY Identity of the cluster SVM netapp​Cluster​VServer​Identity
OUTPUT_​CLUSTER_​NFS_​SERVICE_​IDENTITY Identity of the cluster NFS Service netapp​Cluster​Nfs​Service​Identity

Destroy NetApp Cluster SVM

Summary
Destroys the selected SVM.
Description
This task will destroy the selected SVM in a cluster mode.
Inputs
Input Description Mappable To Type Mandatory
SVM Name Choose an SVM to be deleted netapp​Cluster​VServer​Identity Y
Force Check to forcibly delete the SVM
Outputs
No Outputs

Destroy NetApp Cluster iSCSI Service

Summary
Description
Inputs
Input Description Mappable To Type Mandatory
i​SCSI Service Choose an i​SCSI service to be destroyed netapp​Cluster​VServer​Identity Y
Outputs
Output Description Type
OUTPUT_​CLUSTER_​VSERVER_​IDENTITY Identity of the cluster SVM netapp​Cluster​VServer​Identity
OUTPUT_​CLUSTER_​ISCSI_​SERVICE_​IDENTITY Identity of the cluster ISCSI Service netapp​Cluster​ISCSIService​Identity

Disable Dedupe on NetApp Cluster Flexible Volume

Summary
Disable deduplication on NetApp cluster volume
Description
This task disables deduplication on cluster volume. Dedupe can be disabled on both Flexible and FlexGroup volumes using this task.
Inputs
Input Description Mappable To Type Mandatory
Volume Choose a volume on which to disable dedupe netapp​Cluster​Volume​Identity Y
Outputs
Output Description Type
OUTPUT_​CLUSTER_​VSERVER_​IDENTITY Identity of the cluster SVM netapp​Cluster​VServer​Identity
OUTPUT_​CLUSTER_​VOLUME_​IDENTITY Identity of the cluster Volume netapp​Cluster​Volume​Identity

Disable NetApp SVM User

Summary
Description
Inputs
Input Description Mappable To Type Mandatory
SVM Name Choose an SVM for which to disable access by a user netapp​Cluster​VServer​Identity Y
User​Name Enter the name of the user for which to disable access to the SVM gen_​text_​input Y
Outputs
Output Description Type
OUTPUT_​CLUSTER_​VSERVER_​IDENTITY Identity of the cluster SVM netapp​Cluster​VServer​Identity
OUTPUT_​ADMIN_​USERNAME The Username of the admin adminusername

Enable Dedupe on NetApp Cluster Flexible Volume

Summary
Enable deduplication on NetApp cluster volume
Description
This task enables deduplication on cluster volume. Dedupe can be enabled on both Flexible and FlexGroup volumes using this task.
Inputs
Input Description Mappable To Type Mandatory
Volume Choose a volume on which to enable dedupe netapp​Cluster​Volume​Identity Y
Outputs
Output Description Type
OUTPUT_​CLUSTER_​VSERVER_​IDENTITY Identity of the cluster SVM netapp​Cluster​VServer​Identity
OUTPUT_​CLUSTER_​VOLUME_​IDENTITY Identity of the cluster Volume netapp​Cluster​Volume​Identity

Enable NetApp SVM User

Summary
Description
Inputs
Input Description Mappable To Type Mandatory
SVM Name Choose an SVM on which to enable access for a user netapp​Cluster​VServer​Identity Y
User​Name Enter the name of a user for which to enable access to the SVM gen_​text_​input Y
Outputs
Output Description Type
OUTPUT_​CLUSTER_​VSERVER_​IDENTITY Identity of the cluster SVM netapp​Cluster​VServer​Identity
OUTPUT_​ADMIN_​USERNAME The Username of the admin adminusername

Execute NetApp Cluster CLI

Summary
Description
Inputs
Input Description Mappable To Type Mandatory
Filer Identity Name Choose a Net​App filer to execute a CLI command Cluster​Filer​Identity Y
CLI Command Enter a CLI command to be executed gen_​text_​input
Expected Output Enter the expected output of the CLI execution gen_​text_​input
Undo CLI Command Enter a CLI command to be executed if the task is rolled back gen_​text_​input
Outputs
Output Description Type
OUTPUT_​NETAPP_​CLI_​OUTPUT Output of Net​App CLI Task.​ gen_​text_​input

Get NetApp Cluster Storage

Summary
Description
Inputs
Input Description Mappable To Type Mandatory
Volume Size Enter a storage size gen_​text_​input Y
Volume Size Units Choose a unit for storage size storage​Size​Unit
Server Name Enter a server ID ucs​Server​Identity Y
Outputs
No Outputs

Migrate NetApp Cluster Logical Interface

Summary
Migrate an existing SVM logical interface to physical port or interface group under cluster context.
Description
This task will migrates a logical interface to a port or interface group on the node you specify.
Inputs
Input Description Mappable To Type Mandatory
SVM Name Choose an SVM to which to migrate an associated logical interface netapp​Cluster​VServer​Identity Y
Logical Interface Choose a logical interface to be migrated netapp​Cluster​LIFIdentity Y
Node Name Choose the node to which to migrate the interface netapp​Cluster​Node​Identity Y
Port Name Choose the port to which to migrate the interface gen_​text_​input
Outputs
Output Description Type
OUTPUT_​CLUSTER_​VSERVER_​IDENTITY Identity of the cluster SVM netapp​Cluster​VServer​Identity
OUTPUT_​CLUSTER_​NODE_​NAME Name of the cluster node.​ netapp​Cluster​Node​Name

Modify CIFS on SVM

Summary
Modify the basic configurations of a CIFS server.
Description
This task will modify the basic configurations of a CIFS server.
Inputs
Input Description Mappable To Type Mandatory
SVM Name Choose an SVM on which to modify the CIFS server configuration netapp​Cluster​VServer​Identity Y
Domain Name Enter the fully qualified domain name of the active directory to which the CIFS server belongs cluster​Cifs​Domain
Admin User Enter the username of the account used to add the CIFS server to the active directory cluster​Cifs​User​Name
Admin Password Enter the password of the account used to add the CIFS server to the active directory cluster​Cifs​Pass​Word
Administrative Status Choose the administrative status of the CIFS server gen_​text_​input
Outputs
Output Description Type
OUTPUT_​CLUSTER_​VSERVER_​IDENTITY Identity of the cluster SVM netapp​Cluster​VServer​Identity
OUTPUT_​CLUSTER_​CIFS_​ADMIN_​USERNAME The username of the account used to add this CIFS server to Active Directory.​ cluster​Cifs​User​Name
OUTPUT_​CLUSTER_​CIFS_​ADMIN_​PASSWORD The password for the account used to add this CIFS server to Active Directory.​ cluster​Cifs​Pass​Word
OUTPUT_​CLUSTER_​CIFS_​DOMAIN The fully qualified domain name of the Windows Active Directory.​ cluster​Cifs​Domain

Modify NetApp Cluster Cron Job Schedule

Summary
Modification of cron job schedule.
Description
This task will modify the attributes of the cron job schedule entry.
Inputs
Input Description Mappable To Type Mandatory
Select Cron Job Schedule Name Choose a cron job schedule name to modify Net​App​Cluster​Cron​Job​Identity Y
Day of Month Enter one or more day of the month.​ Separate days of the month with commas.​ gen_​text_​input
Day of Week Enter one or more day of the week.​ Separate days of the week with commas.​ gen_​text_​input
Hour Enter one or more hour.​ Separate hours with commas.​ gen_​text_​input
Minute Enter one or more minute.​ Separate minutes with commas.​ gen_​text_​input Y
Month Enter one or more month.​ Separate months with commas.​ gen_​text_​input
Outputs
Output Description Type
OUTPUT_​CLUSTER_​CRON_​JOB_​SCHEDULE_​IDENTITY Identity of the cron job schedule.​ Net​App​Cluster​Cron​Job​Identity

Modify NetApp Cluster Logical Interface

Summary
Modify the existing logical interface associated with a SVM.
Description
This task modifies parameters of the logical interface (LIF) associated with a storage virtual machine (SVM). IP address, subnet mask, home node, home port, and failover policies can be modified. Active LIFs that have iSCSI protocol enabled do not allow changes to home node, home port, or failover policy. Active LIFs with FCP protocol do not allow changes to any parameter.
Inputs
Input Description Mappable To Type Mandatory
Logical Interface Choose the logical interface to be modified netapp​Cluster​LIFIdentity Y
Home Node Choose the home node for the interface netapp​Cluster​Node​Identity Y
Home Port Choose the home port for the interface gen_​text_​input Y
IP Address Enter an IP address for the logical interface gen_​text_​input
Subnet Mask Enter the subnet mask of the IP address gen_​text_​input
Failover Policy Choose a failover group for the LIF NETAPP_​LIF_​FAILOVER_​POLICY
Use Failover Group Choose whether to create the failover rules automatically or manually NETAPP_​LIF_​USE_​FAILOVER_​GROUP
Outputs
Output Description Type
OUTPUT_​CLUSTER_​LOGICAL_​INF_​IDENTITY Identity of the cluster Logical interface netapp​Cluster​LIFIdentity
OUTPUT_​CLUSTER_​NODE_​NAME Name of the cluster node.​ netapp​Cluster​Node​Name
LIF_​IP_​ADDRESS IP Address of the LIF gen_​text_​input
OUTPUT_​CLUSTER_​NODE_​IDENTITY Identity of the cluster node.​ netapp​Cluster​Node​Identity
OUTPUT_​ACCOUNT_​IDENTITY Identity of the Account gen_​text_​input
ACCOUNT_​NAME Name of the Account on which the selected operation was performed netapp​Account​Name
OUTPUT_​CLUSTER_​LOGICAL_​INF_​NAME Name of the Cluster Logical interface netapp​Cluster​LIFName
OUTPUT_​CLUSTER_​SVM_​IDENTITY Identity of the SVM netapp​Cluster​VServer​Identity
OUTPUT_​CLUSTER_​PORT Name of the cluster port.​ gen_​text_​input

Modify NetApp Cluster NFS Service

Summary
Modifies NFS service attributes
Description
This task will modify nfs service attributes like isNfsAccessEnabled,tec
Inputs
Input Description Mappable To Type Mandatory
NFS Service Choose an NFS service to be modified netapp​Cluster​VServer​Identity Y
Is NFS Access Enabled Check to enable NFS access gen_​text_​input
Is Vstorage Enabled Check to enable Vstorage gen_​text_​input
Outputs
Output Description Type
OUTPUT_​CLUSTER_​VSERVER_​IDENTITY Identity of the cluster SVM netapp​Cluster​VServer​Identity
OUTPUT_​CLUSTER_​NFS_​SERVICE_​IDENTITY Identity of the cluster NFS Service netapp​Cluster​Nfs​Service​Identity

Modify NetApp Cluster Peer

Summary
Modifies a peer relationship between two existing clusters
Description
This task will modify the peering relationship between two clusters
Inputs
Input Description Mappable To Type Mandatory
Select cluster peer Choose a cluster peer with which to modify the relationship netapp​Cluster​Peer​Identity Y
Select peer inter clusters Choose the inter clusters netapp​Cluster​LIFIdentity Y
Time out (seconds) Enter the timeout value.​ Default timeout value is 15 secs.​
Outputs
Output Description Type
OUTPUT_​CLUSTER_​PEER_​IDENTITY Identity of the cluster peer netapp​Cluster​Peer​Identity

Modify NetApp Cluster QOS Policy Group

Summary
Modify an existing QOS policy group.
Description
This task modifies an existing QOS policy group created on the NetApp cluster SVM. A QOS policy group without a maximum throughput value allows unlimited throughput.
Inputs
Input Description Mappable To Type Mandatory
QOS Policy Group Select the QOS policy group to modify NETAPP_​CLUSTER_​QOS_​POLICY_​GROUPS_​IDENTITY Y
Maximum Throughput Enter the maximum throughput value to be applied to the QOS policy group.​ Default value is unlimited.​ gen_​text_​input
Unit Of Throughput Select the unit of transfer for maximum throughput NETAPP_​CLUSTER_​QOS_​POLICY_​GROUP_​MAXIMUM_​THROUGHPUT_​UNIT
Outputs
Output Description Type
OUTPUT_​NETAPP_​CLUSTER_​QOS_​POLICY_​GROUP_​IDENTITY Identity of the cluster QOS policy group.​ NETAPP_​CLUSTER_​QOS_​POLICY_​GROUPS_​IDENTITY
OUTPUT_​NETAPP_​CLUSTER_​QOS_​POLICY_​GROUP_​MAXIMUM_​THROUGHPUT_​UNIT Unit of the maximum throughput for the QOS policy group NETAPP_​CLUSTER_​QOS_​POLICY_​GROUP_​MAXIMUM_​THROUGHPUT_​UNIT
OUTPUT_​NETAPP_​CLUSTER_​VSERVER_​IDENTITY Net​App Cluster SVM Identity netapp​Cluster​VServer​Identity

Modify NetApp Cluster SVM

Summary
Modifies Cluster SVM parameters
Description
This task will modify cluster SVM parameters, Name Service Switch, Name Mapping Switch, Max volume limit, Aggregate list, Snapshot policy and Protocols.
Inputs
Input Description Mappable To Type Mandatory
SVM Name Choose the SVM to be modified netapp​Cluster​VServer​Identity Y
Name Service Switch Choose a name service switch netapp​Cluster​Vserver​Name​Service​Switch
Name Mapping Switch Choose a name mapping switch netapp​Cluster​Vserver​Name​Mapping​Switch
Max.​ Volume Limit Enter the maximum number of volumes that can be created on the SVM gen_​text_​input
Aggregate List Choose one or more aggregates on which volumes can be created aggregate​Cluster​Identity Y
Snapshot Policy Choose a snapshot policy netapp​Cluster​Snapshot​Policy​Identity
Protocols Choose the protocols to be enabled on the SVM vserver​Protocol
Outputs
Output Description Type
OUTPUT_​CLUSTER_​VSERVER_​IDENTITY Identity of the cluster SVM netapp​Cluster​VServer​Identity
OUTPUT_​CLUSTER_​SNAPSHOT_​POLICY_​IDENTITY Identity of the cluster snapshot policy netapp​Cluster​Snapshot​Policy​Identity

Modify NetApp SVM SIS Policy

Summary
Modifies a new SIS policy.
Description
This task will modify a SIS policy for SVM.
Inputs
Input Description Mappable To Type Mandatory
SVM Name Choose an SVM on which to modify the SIS policy netapp​Cluster​VServer​Identity Y
SIS policy name Choose a SIS policy to be modified cluster​Sis​Policy​Name Y
Enabled Choose to enable or disable the SIS policy cluster​Sis​Enabled
QOS Policy Choose the QOS policy for SIS operations cluster​Sis​Qos​Policy
Duration Enter the length of time in hours for which to run the scheduled SIS operations cluster​Sis​Duration
Schedule Choose a cron job schedule to be used for the SIS operations cluster​Sis​Cron​Job​Schedule
Comment Enter a comment gen_​text_​input
Outputs
Output Description Type
OUTPUT_​CLUSTER_​VSERVER_​IDENTITY Identity of the cluster SVM netapp​Cluster​VServer​Identity
OUTPUT_​CLUSTER_​SIS_​POLICY_​NAME Name of the sis Policy.​ cluster​Sis​Policy​Name
OUTPUT_​CLUSTER_​SIS_​ENABLED To Enable/Disable sis policy.​ cluster​Sis​Enabled
OUTPUT_​CLUSTER_​SIS_​DURATION The duration in hours for which the scheduled sis operation should run.​ cluster​Sis​Duration
OUTPUT_​CLUSTER_​SIS_​QOS_​POLICY QOS Policy for the SIS operation.​ cluster​Sis​Qos​Policy
OUTPUT_​CLUSTER_​CRON_​JOB_​SCHEDULE Cron type job schedule name.​ cluster​Sis​Cron​Job​Schedule

Modify NetApp SVM User

Summary
Description
Inputs
Input Description Mappable To Type Mandatory
SVM Name Choose an SVM on which to modify access for a user netapp​Cluster​VServer​Identity Y
User​Name Enter the name of the user gen_​text_​input Y
Password Enter a new password for the user password Y
Outputs
Output Description Type
OUTPUT_​CLUSTER_​VSERVER_​IDENTITY Identity of the cluster SVM netapp​Cluster​VServer​Identity
OUTPUT_​ADMIN_​USERNAME The Username of the admin adminusername

Modify NetApp SnapMirror Policy

Summary
Modify a snapmirror policy on SVM
Description
This task will modify a SnapMirror policy on a SVM.
Inputs
Input Description Mappable To Type Mandatory
Select Policy Choose a Snapmirror policy to be modified Net​App​Cluster​Snapmirror​Policy​Identity Y
Restart Choose the type of restart netapp​Snapmirror​Restart​Type
Transfer Priority Choose the priority of the transfer netapp​Snapmirror​Transfer​Priority​Type
Enter Comment Enter a comment gen_​text_​input
Outputs
Output Description Type
OUTPUT_​CLUSTER_​SNAPMIRROR_​POLICY_​IDENTITY Identity of the snapmirror policy Net​App​Cluster​Snapmirror​Policy​Identity

Modify NetApp SnapMirror Policy Rule

Summary
Modify a rule from cluster snapmirror policy
Description
This task will modify a rule from the snapmirror policy.
Inputs
Input Description Mappable To Type Mandatory
Select Policy Rule Choose a policy rule to modify Net​App​Cluster​Snapmirror​Policy​Rule​Identity Y
Snapshot Copy Retention Count Enter the snapshot copy retention count gen_​text_​input Y
Preserve Check to enable snapshot copy preserve
Warning Threshold Count Enter the warning threshold count gen_​text_​input
Outputs
Output Description Type
OUTPUT_​CLUSTER_​SNAPMIRROR_​POLICY_​RULE_​IDENTITY Identity of the snapmirror policy rule Net​App​Cluster​Snapmirror​Policy​Rule​Identity

Modify NetApp SnapMirror Relationship

Summary
Modifies snapmirror relationship between two SVM volumes
Description
This task will modify the parameters of the SnapMirror relationship of type Data Protection between a source and destination volumes.
Inputs
Input Description Mappable To Type Mandatory
Select Snap​Mirror Relationship Choose a Snapmirror relationship to modify Net​App​Cluster​Snapmirror​Relation​Identity Y
Policy Choose a Snapmirror policy Net​App​Cluster​Snapmirror​Policy​Identity
Schedule Choose a cron job with which to schedule the Snapmirror update Net​App​Cluster​Cron​Job​Identity
Maximum Transfer Rate (kbps) Enter the maximum transfer rate.​ Default is 0, which specifies an unlimited transfer rate.​ gen_​text_​input
Outputs
Output Description Type
OUTPUT_​CLUSTER_​SNAPMIRROR_​RELATIONSHIP_​IDENTITY Identity of the snapmirror relationship Net​App​Cluster​Snapmirror​Relation​Identity

Modify Netapp Cluster Logical Interface Status

Summary
Modify a Netapp cluster logical interface status.
Description
This task modifies the administrative status of the logical interface associated with a storage virtual machine (SVM).
Inputs
Input Description Mappable To Type Mandatory
Logical Interface Select logical interface name to modify status netapp​Cluster​LIFIdentity Y
Administrative Status LIF's Administrative Status NETAPP_​LIF_​STATUS
Outputs
Output Description Type
OUTPUT_​CLUSTER_​LOGICAL_​INF_​IDENTITY Identity of the cluster Logical interface netapp​Cluster​LIFIdentity
OUTPUT_​ACCOUNT_​IDENTITY Identity of the Account gen_​text_​input
ACCOUNT_​NAME Name of the Account on which the selected operation was performed netapp​Account​Name
OUTPUT_​CLUSTER_​LOGICAL_​INF_​NAME Name of the Cluster Logical interface netapp​Cluster​LIFName
OUTPUT_​CLUSTER_​SVM_​IDENTITY Identity of the SVM netapp​Cluster​VServer​Identity
OUTPUT_​CLUSTER_​PORT Name of the cluster port.​ gen_​text_​input

Move NetApp Cluster Volume

Summary
Moves a volume to setination aggregate under the cluster context.
Description
This task will moves a flexible volume to any eligible aggregate in the cluster.
Inputs
Input Description Mappable To Type Mandatory
Volume Name Choose the volume to be migrated netapp​Cluster​Volume​Identity Y
Aggregate Name Choose an aggregate to which to migrate the volume netapp​Cluster​Aggregate​Name Y
Outputs
Output Description Type
OUTPUT_​CLUSTER_​VOLUME_​IDENTITY Identity of the cluster Volume netapp​Cluster​Volume​Identity

Reject NetApp Cluster SVM Peer

Summary
Rejects a new SVM peer relationship which is in pending state
Description
This task will reject the SVM peer relationship which is in pending state.
Inputs
Input Description Mappable To Type Mandatory
Select SVM Peer relationship id Choose an SVM relationship ID with which to reject a peer relationship netapp​Source​Cluster​VServer​Peer​Identity Y
Outputs
Output Description Type
OUTPUT_​SOURCE_​CLUSTER_​VSERVER_​PEER_​RELATIONSHIP_​IDENTITY Identity of the source cluster SVM peer relationship netapp​Source​Cluster​VServer​Peer​Identity
OUTPUT_​DESTINATION_​CLUSTER_​VSERVER_​PEER_​RELATIONSHIP_​IDENTITY Identity of the destination cluster SVM peer relationship netapp​Destination​Cluster​VServer​Peer​Identity

Remove NetApp SnapMirror Policy Rule

Summary
Removes a rule from cluster snapmirror policy
Description
This task will remove a rule from the snapmirror policy.
Inputs
Input Description Mappable To Type Mandatory
Select Policy Rule Choose a policy rule to remove Net​App​Cluster​Snapmirror​Policy​Rule​Identity Y
Outputs
No Outputs

Remove port from Cluster Interface Group

Summary
Remove an existing port from interface group on the node under cluster context.
Description
This task will removes a network port from port interface group. The port interface group must already exist.
Inputs
Input Description Mappable To Type Mandatory
Interface Group Name Choose the interface group from which to remove a port netapp​Cluster​Inf​Group​Identity Y
Port Name Choose a port to remove from the interface gen_​text_​input Y
Outputs
No Outputs

Rename NetApp Cluster IPSpace

Summary
Assigns selected interface to IP Space.
Description
This task will rename the selected VLAN interface to the IP Space. This task will work for both ONTAP and OnCommand accounts.
Inputs
Input Description Mappable To Type Mandatory
IPSPace Name Choose an IP space to be renamed netapp​Cluster​IPSpace​Identity Y
New IPSPace Name Enter a new name for the IP space gen_​text_​input Y
Outputs
Output Description Type
OUTPUT_​NETAPP_​CLUSTER_​IPSPACE_​NAME Name of the Net​App cluster IPSpace.​ netapp​Cluster​IPSpace​Name
OUTPUT_​NETAPP_​CLUSTER_​IPSPACE_​IDENTITY Net​App cluster IPSpace Identity.​ netapp​Cluster​IPSpace​Identity
OUTPUT_​FILER_​IDENTITY Identity of the Filer filer​Identity

Set NetApp FCP Port Name

Summary
Sets FCP Adapter portname
Description
This task will set new port name to selected fcp adapter.
Inputs
Input Description Mappable To Type Mandatory
Adapter Name(LIF) Choose an FCP Adaptor for which to set portname netapp​Cluster​LIFIdentity Y
Port Name(wwpn) Enter a port name in WWPN format gen_​text_​input Y
Outputs
Output Description Type
OUTPUT_​CLUSTER_​VSERVER_​IDENTITY Identity of the cluster SVM netapp​Cluster​VServer​Identity
OUTPUT_​CLUSTER_​LOGICAL_​INF_​IDENTITY Identity of the cluster Logical interface netapp​Cluster​LIFIdentity
OUTPUT_​CLUSTER_​FCP_​PORT_​NAME Name of the cluster fcp port(wwpn).​ gen_​text_​input

Setup CIFS on NetApp SVM

Summary
Configure and setup CIFS services on a SVM.
Description
This task will Configure and setup CIFS services on a SVM.
Inputs
Input Description Mappable To Type Mandatory
SVM Name Choose an SVM on which to set up and configure CIFS server netapp​Cluster​VServer​Identity Y
CIFS Server Enter the net​BIOS name of the CIFS server gen_​text_​input Y
Domain Name Enter the fully qualified domain name of the active directory to which this server belongs cluster​Cifs​Domain Y
Admin User Enter the username of the account used to add this CIFS server to the active directory cluster​Cifs​User​Name Y
Admin Password Enter the password of the account used to add this CIFS server to the active directory cluster​Cifs​Pass​Word Y
Organizational Unit Enter the name of the organizational unit within the active directory to which this CIFS server belongs gen_​text_​input Y
Schema Choose the LDAP schema to be used for this configuration gen_​text_​input Y
Server IP Enter one or more LDAP IP addresses to use for this configuration.​ This option is not applicable for configurations using active directory LDAP servers.​ Separate the IP addresses with commas if more than one address is specified.​ gen_​text_​input Y
Outputs
Output Description Type
OUTPUT_​CLUSTER_​VSERVER_​IDENTITY Identity of the cluster SVM netapp​Cluster​VServer​Identity
OUTPUT_​CLUSTER_​CIFS_​ADMIN_​USERNAME The username of the account used to add this CIFS server to Active Directory.​ cluster​Cifs​User​Name
OUTPUT_​CLUSTER_​CIFS_​ADMIN_​PASSWORD The password for the account used to add this CIFS server to Active Directory.​ cluster​Cifs​Pass​Word
OUTPUT_​CLUSTER_​CIFS_​DOMAIN The fully qualified domain name of the Windows Active Directory.​ cluster​Cifs​Domain

Start/Stop NetApp SVM FCP Service

Summary
Starts or stops FCP service of SVM
Description
This task will start or stop the fcp service of selected SVM.
Inputs
Input Description Mappable To Type Mandatory
SVM Name Choose an SVM on which to start the FCP services netapp​Cluster​VServer​Identity Y
FCP Service Start Check to start the FCP service on the SVM netapp​Cluster​FCPService​Is​Available
Outputs
Output Description Type
OUTPUT_​CLUSTER_​VSERVER_​IDENTITY Identity of the cluster SVM netapp​Cluster​VServer​Identity

Start/Stop NetApp SVM ISCSI Service

Summary
Starts or stops ISCSI service of SVM
Description
This task will start or stop the iscsi service of selected SVM.
Inputs
Input Description Mappable To Type Mandatory
SVM Name Choose an SVM on which to start the i​SCSI services netapp​Cluster​VServer​Identity Y
ISCSI Service Start Check to start the i​SCSI service on the SVM gen_​text_​input
Outputs
Output Description Type
OUTPUT_​CLUSTER_​VSERVER_​IDENTITY Identity of the cluster SVM netapp​Cluster​VServer​Identity
OUTPUT_​CLUSTER_​ISCSI_​SERVICE_​IDENTITY Identity of the cluster ISCSI Service netapp​Cluster​ISCSIService​Identity