APIC - Filter Operations

This chapter contains the following sections:

Create APIC Tenant Filter

Summary
Create a tenant filter.
Description
This task creates a tenant filter on the APIC controller.
Inputs
Input Description Mappable To Type Mandatory
Tenant Name Select a tenant name.​ Apic​Device​Tenant​Identity Y
Filter Name Enter a filter name.​ gen_​text_​input Y
Description Enter a description.​ The description can be up to 128 alphanumeric characters.​ gen_​text_​input
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​NAME Tenant Name on which the selected operation was performed gen_​text_​input
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
TENANT_​FILTER Tenant's Filter gen_​text_​input
TENANT_​FILTER_​IDENTITY Tenant Filter Identity Apic​Device​Tenant​Filter​Identity

Create APIC Tenant Filter Rule

Summary
Create a tenant filter rule.
Description
This task creates a tenant filter rule on the APIC controller.
Inputs
Input Description Mappable To Type Mandatory
Filter Name Select a filter name.​ Apic​Device​Tenant​Filter​Identity Y
Filter Rule Name Enter a filter rule name.​ gen_​text_​input Y
Description Enter a description.​ The description can be up to 128 alphanumeric characters.​ gen_​text_​input
Ethernet Type Choose an ethernet type.​ Specify any one of these values: unspecified, arp, fcoe, ip, MAC security, mpls unicast, trill.​ The default value is 'unspecified'.​ gen_​text_​input Y
ARP Flag Choose an ARP Flag.​ Specify any one of these values: unspecified, arp reply, arp request.​ The default value is 'unspecified'.​ gen_​text_​input
IP Protocol Choose IP Protocol.​ Specify any one of these values: egp, eigrp, icmp, igmp, igp, l2tp, ospf, pim, tcp, udp, unspecified.​ The default value is 'unspecified'.​ gen_​text_​input
Allow Fragment Check or uncheck whether Allow Fragment is true or false.​ The default value is false.​ gen_​text_​input
Source Port Start Choose a source port start.​ Specify any one of these values: unspecified, ftp​Data, SMTP, DNS, HTTP, POP3, HTTPS, RTSP.​ The default value is 'unspecified'.​ gen_​text_​input
Source Port Start Custom Enter a custom source port start.​ The value must be between 0 and 65535.​ gen_​text_​input Y
Source Port End Choose a source port end.​ Specify any one of these values: unspecified, ftp​Data, SMTP, DNS, HTTP, POP3, HTTPS,RTSP.​ The default value is 'unspecified'.​ gen_​text_​input
Source Port End Custom Enter a custom source port end.​ The value must be between 0 and 65535.​ gen_​text_​input Y
Destination Port Start Choose a destination port start.​ Specify any one of these values: unspecified, ftp​Data, SMTP, DNS, HTTP, POP3, HTTPS,RTSP.​ The default value is 'unspecified'.​ gen_​text_​input
Destination Port Start Custom Enter a custom destination port start.​ The value must be between 0 and 65535.​ gen_​text_​input Y
Destination Port End Choose a destination port end.​ Specify any one of these values: unspecified, ftp​Data, SMTP, DNS, HTTP, POP3, HTTPS,RTSP.​ The default value is 'unspecified'.​ gen_​text_​input
Destination Port End Custom Enter Destination Port End Custom.​ The value must be between 0 and 65535.​ gen_​text_​input Y
TCP Session Rule Select a TCP session rule.​
Stateful Check or uncheck to make Stateful true or false.​ The default value is false.​ Boolean
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​NAME Tenant Name on which the selected operation was performed gen_​text_​input
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
TENANT_​FILTER Tenant's Filter gen_​text_​input
TENANT_​FILTER_​IDENTITY Tenant Filter Identity Apic​Device​Tenant​Filter​Identity
TENANT_​FILTER_​RULE Tenant's Filter Rule gen_​text_​input
TENANT_​FILTER_​RULE_​IDENTITY Tenant's Filter Rule Identity Apic​Device​Tenant​Filter​Rule​Identity

Delete APIC Tenant Filter

Summary
Delete a tenant filter.
Description
This task deletes a tenant filter on the APIC controller.
Inputs
Input Description Mappable To Type Mandatory
Filter Name Select a filter name.​ Apic​Device​Tenant​Filter​Identity Y
Do you want to delete the selected Tenant Filter? Y
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​NAME Tenant Name on which the selected operation was performed gen_​text_​input
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
TENANT_​FILTER Tenant's Filter gen_​text_​input

Delete APIC Tenant Filter Rule

Summary
Delete a tenant filter rule.
Description
This task deletes a tenant filter rule on the APIC controller.
Inputs
Input Description Mappable To Type Mandatory
Filter Rule Name Select filter rule name Apic​Device​Tenant​Filter​Rule​Identity Y
Do you want to delete the selected Tenant Filter Rule? Y
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​NAME Tenant Name on which the selected operation was performed gen_​text_​input
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
TENANT_​FILTER Tenant's Filter gen_​text_​input
TENANT_​FILTER_​IDENTITY Tenant Filter Identity Apic​Device​Tenant​Filter​Identity
TENANT_​FILTER_​RULE Tenant's Filter Rule gen_​text_​input
TENANT_​FILTER_​RULE_​IDENTITY Tenant's Filter Rule Identity Apic​Device​Tenant​Filter​Rule​Identity