APIC - L4-L7 Services - Function Node Operations

This chapter contains the following sections:

Add ACL Entry To APIC Function Node

Summary
Add an ACL entry to a function node in UCSD.
Description
This task adds an access control list (ACL) entry to a function node. Input includes protocol information and source and destination port range on the APIC Controller.
Inputs
Input Description Mappable To Type Mandatory
Node Select a node.​ Apic​Tenant​L4L7Service​Graph​Node​Identity Y
ACL List Name Enter an ACL List name.​ gen_​text_​input Y
ACL Entry Name Enter an ACL Entry Name.​ gen_​text_​input Y
Protocol Choose a protocol.​ Specify any one of: ip, tcp, udp, icmp.​ The default value is 'ip'.​ gen_​text_​input
Source Any Check Source Any either true or false.​ The default value is true.​ gen_​text_​input
Source Address Enter a Source Address.​ Enter an IP address (1.​1.​1.​1), Ipv6 address range (1.​1.​1.​1-1.​1.​2.​2) or a network address/subnet mask (1.​1.​1.​1/255.​255.​255.​192).​ gen_​text_​input
Destination Any Check Destination Any either true or false.​ The default value is true.​ gen_​text_​input
Destination Address Enter a Destination Address.​ Enter an IP address (1.​1.​1.​1), Ipv6 address range (1.​1.​1.​1-1.​1.​2.​2) or a network address/subnet mask (1.​1.​1.​1/255.​255.​255.​192).​ gen_​text_​input
Action Choose an action.​ Specify either permit or deny.​ The default value is 'deny'.​ gen_​text_​input
Order Enter an order.​ gen_​text_​input
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​NAME Tenant Name on which the selected operation was performed gen_​text_​input
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
SERVICE_​GRAPH Service Graph gen_​text_​input
TENANT_​L4L7_​SERVICE_​GRAPH_​NODE_​IDENTITY APIC Tenant Service Graph Node Identity Apic​Tenant​L4L7Service​Graph​Node​Identity
OUTPUT_​TENANT_​L4L7_​NODE_​ACL_​IDENTITY APIC Tenant Service Graph Node ACL Identity Apic​Tenant​L4L7Node​Acl​Identity
OUTPUT_​TENANT_​L4L7_​NODE_​ACCESS_​CONTROL_​ENTRY_​IDENTITY APIC Tenant Service Graph Node Access Control Entry Identity Apic​Tenant​L4L7Node​Access​Entry​Control​Identity

Add APIC Function Node to L4-L7 Service Graph

Summary
Add a function node to an L4-L7 service graph in UCSD.
Description
This task adds a function node to an L4-L7 service graph. Input includes a tenant name, node name, and service graph name on the APIC controller.
Inputs
Input Description Mappable To Type Mandatory
Node Name Enter a node name.​ gen_​text_​input Y
Use Existing Graph Check Use Existing Graph either true or false.​ The default value is false.​
Service Graph Name Select a service graph name.​ Apic​Device​Tenant​Service​Graph​Identity Y
Tenant Name Select a tenant name.​ Apic​Device​Tenant​Identity Y
Service Graph Name Enter a service graph name.​ gen_​text_​input Y
Service Graph Description Enter a service graph description.​ The description can be up to 128 alphanumeric characters.​ gen_​text_​input
Function Name Select an function name.​ Apic​Tenant​Service​Graph​Function​Node​Identity Y
Add Params to EPG Check Add Params to EPG either true or false.​ The default value is true.​
Function Type Select an function type.​ Apic​Service​Graph​Node​Function​Type Y
Function Profile Select an function profile.​ Apic​Tenant​Function​Profile​Node​Identity
apply policy Check Apply Policy either true or false.​ The default value is false.​
Default Profile Select a default profile.​ Apic​L4L7Service​Graph​Function​Profile​Identity
Policy Select a policy.​ Apic​L4L7Service​Graph​APICASAFunction​Profile​Identity
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​NAME Tenant Name on which the selected operation was performed gen_​text_​input
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
SERVICE_​GRAPH Service Graph gen_​text_​input
TENANT_​SERVICE_​GRAPH_​IDENTITY APIC Tenant Bidirectional Service Graph Identity Apic​Device​Tenant​Service​Graph​Identity
TENANT_​L4L7_​SERVICE_​GRAPH_​NODE_​IDENTITY APIC Tenant Service Graph Node Identity Apic​Tenant​L4L7Service​Graph​Node​Identity
TENANT_​SERVICE_​GRAPH_​NODE_​CONNECTION_​ONE_​IDENTITY Tenant Service Graph Node Connection One Identity Apic​Device​Tenant​Service​Graph​Node​Connection​Identity
TENANT_​SERVICE_​GRAPH_​NODE_​CONNECTION_​TWO_​IDENTITY Tenant Service Graph Node Connection Two Identity Apic​Device​Tenant​Service​Graph​Node​Connection​Identity

Add Bridge Group Interface To APIC Function Node

Summary
Add a bridge group interface to a function node.
Description
This task adds a bridge group interface with name and IP information to a function node.
Inputs
Input Description Mappable To Type Mandatory
Node Select a node.​ Apic​Tenant​L4L7Service​Graph​Node​Identity Y
Bridge Group ID Enter Bridge Group ID within the range 1 to 100.​ gen_​text_​input Y
IPv4 Address Value Enter the IPv4 address of the bridge group interface in the format : i.​i.​i.​i/m.​m.​m.​m.​ For example: 10.​10.​10.​10/11.​11.​11.​11 gen_​text_​input
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​NAME Tenant Name on which the selected operation was performed gen_​text_​input
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
SERVICE_​GRAPH Service Graph gen_​text_​input
TENANT_​SERVICE_​GRAPH_​IDENTITY APIC Tenant Bidirectional Service Graph Identity Apic​Device​Tenant​Service​Graph​Identity
TENANT_​L4L7_​SERVICE_​GRAPH_​NODE_​IDENTITY APIC Tenant Service Graph Node Identity Apic​Tenant​L4L7Service​Graph​Node​Identity
TENANT_​BRIDGE_​GROUP_​INTERFACE_​IDENTITY APIC Tenant Bridge Group Interface Identity Apic​Tenant​Bridge​Group​Interface​Identity

Add Function Config Parameters To APIC Function Node

Summary
Add function config parameters to a function node.
Description
This task adds function configuration parameters to a function node on the APIC controller.
Inputs
Input Description Mappable To Type Mandatory
Node Select Function Config Parameters To Function Node.​ Apic​Tenant​L4L7Service​Graph​Node​Identity Y
External Interface Enter External Interface to parameters.​ gen_​text_​input Y
Internal Interface Enter Internal Interface to parameters.​ gen_​text_​input Y
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​NAME Tenant Name on which the selected operation was performed gen_​text_​input
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
SERVICE_​GRAPH Service Graph gen_​text_​input
TENANT_​SERVICE_​GRAPH_​IDENTITY APIC Tenant Bidirectional Service Graph Identity Apic​Device​Tenant​Service​Graph​Identity
TENANT_​L4L7_​SERVICE_​GRAPH_​NODE_​IDENTITY APIC Tenant Service Graph Node Identity Apic​Tenant​L4L7Service​Graph​Node​Identity
TENANT_​FUNCTION_​CONFIG_​PARAMETER_​IDENTITY APIC Tenant Function Config Parameter Identity gen_​text_​input

Add Interface To APIC Function Node

Summary
Add an interface to a function node.
Description
This task adds an interface to a function node on the APIC controller.
Inputs
Input Description Mappable To Type Mandatory
Function Node Select Function Node to add Interface.​ Apic​Tenant​L4L7Service​Graph​Node​Identity Y
Interface Name Enter an interface name.​ gen_​text_​input Y
IPv4 Address Enter an IPv4 address value.​ gen_​text_​input
Security Level Security Level Value gen_​text_​input Y
Bridge Group ID Bridge Group ID Apic​Tenant​Bridge​Group​Interface​Identity
Inbound ACL Inbound ACL Value Apic​Tenant​L4L7Node​Acl​Identity
Outbound ACL Outbound ACL Value Apic​Tenant​L4L7Node​Acl​Identity
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​NAME Tenant Name on which the selected operation was performed gen_​text_​input
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
SERVICE_​GRAPH Service Graph gen_​text_​input
TENANT_​SERVICE_​GRAPH_​IDENTITY APIC Tenant Bidirectional Service Graph Identity Apic​Device​Tenant​Service​Graph​Identity
TENANT_​L4L7_​SERVICE_​GRAPH_​NODE_​IDENTITY APIC Tenant Service Graph Node Identity Apic​Tenant​L4L7Service​Graph​Node​Identity
TENANT_​L4L7_​SERVICE_​GRAPH_​NODE_​INTERFACE_​IDENTITY APIC Tenant Service Graph Node Interface Identity gen_​text_​input

Add Load Balancer Parameters To APIC Function Node

Summary
Add load balancer parameters to a function node via APIC.
Description
This task adds load balancer parameters to a function node on the APIC Controller. It requires a function name, a service graph name and a node as inputs.
Inputs
Input Description Mappable To Type Mandatory
Node Select a node.​ Apic​Tenant​L4L7Service​Graph​Node​Identity Y
Use Existing Graph Check Use Existing Node either true or false.​ The default value is true.​
Node Name Enter a node name.​ gen_​text_​input Y
Use Existing Graph Check Use Existing Graph either true or false.​ The default value is false.​
Service Graph Name Select a service graph name.​ Apic​Device​Tenant​Service​Graph​Identity Y
Tenant Name Select a tenant name.​ Apic​Device​Tenant​Identity Y
Service Graph Name Enter a service graph name.​ gen_​text_​input Y
Service Graph Description Enter a service graph description.​ The description can be up to 128 alphanumeric characters.​ gen_​text_​input
Function Name Select an function name.​ Apic​Tenant​Service​Graph​Function​Node​Identity Y
Policy Select a policy.​ Apic​L4L7Service​Graph​Function​Profile​Identity
Policy Select a policy.​ Apic​L4L7Service​Graph​ASAFunction​Profile​Identity
External IP Enter an External IP in the format i.​i.​i.​i.​ For example: 2.​2.​2.​2.​ gen_​text_​input Y
External Netmask Enter an External Netmask in the range 1 to 30.​ gen_​text_​input Y
Internal IP Enter an Internal IP in the format of i.​i.​i.​i.​ For example: 2.​2.​2.​2.​ gen_​text_​input Y
Internal Netmask Enter an Internal Netmask in the range 1 to 30.​ gen_​text_​input Y
IP Pool Option for Virtual IP Choose an IP Pool Option for Virtual IP.​ Specify the value as either Select IP Pool from existing list or Provide IP Address.​ The default value is 'Select IP Pool from existing list'.​ gen_​text_​input Y
IP Pool Select an IP Pool to get an unreserved IP for a virtual IP.​ Specify an IPv4 address.​ For example: 192.​168.​1.​1/255.​255.​255.​0.​ gen_​text_​input
IP Address Enter an IP Pool to get an unreserved IP for a virtual IP.​ For example: IPv4 Address 10.​1.​1.​1.​ gen_​text_​input
VIP Ntmask Enter a VIP Netmask in the range 1 to 30.​ gen_​text_​input Y
Services Enter Service IPs.​ Separate the IP addresses with commas.​ For example: 1.​1.​1.​1, 1.​2.​3.​4, 1.​2.​4.​4.​ gen_​text_​input Y
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​NAME Tenant Name on which the selected operation was performed gen_​text_​input
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
SERVICE_​GRAPH Service Graph gen_​text_​input
TENANT_​EPG APIC Tenant EPG gen_​text_​input
TENANT_​CONTRACT APIC Tenant Contract gen_​text_​input

Add Network Object Parameters To APIC Function Node

Summary
Add network object parameters to a function node.
Description
This task adds network object parameters to a function node on the APIC controller.
Inputs
Input Description Mappable To Type Mandatory
Node Select Function Node to add Object Parameters.​ Apic​Tenant​L4L7Service​Graph​Node​Identity Y
Network Name Enter a network Object Parameter name.​ gen_​text_​input Y
Network Object Type Select a network Object Parameter Type.​ gen_​text_​input
FQDN Enter Fully Qualified Domain names.​ gen_​text_​input
Host IP Address Enter Host IP Address.​ Example: 0.​0.​0.​255/255.​255.​255.​0.​ gen_​text_​input
IP Address Range Enter IP Address Range.​ Example: 0.​0.​0.​0 to 255.​255.​255.​255.​ gen_​text_​input
Network IP Address Enter the network IP Address.​ For example, if the IP is 192.​168.​1.​101 and the subnet mask is 255.​255.​255.​0, then the network address is 192.​168.​1.​0.​ gen_​text_​input
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​NAME Tenant Name on which the selected operation was performed gen_​text_​input
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
SERVICE_​GRAPH Service Graph gen_​text_​input
TENANT_​SERVICE_​GRAPH_​IDENTITY APIC Tenant Bidirectional Service Graph Identity Apic​Device​Tenant​Service​Graph​Identity
TENANT_​L4L7_​SERVICE_​GRAPH_​NODE_​IDENTITY APIC Tenant Service Graph Node Identity Apic​Tenant​L4L7Service​Graph​Node​Identity
TENANT_​NETWORK_​OBJECT_​PARAMETER_​IDENTITY APIC Tenant Network Object Parameter Identity Apic​Tenant​Network​Object​Identity

Delete ACE From ACL on APIC Function Node

Summary
Delete an ACE from an ACL on a function node via APIC.
Description
This task deteles an access control entry (ACE) From an access control list (ACL) on a function node on the APIC controller.
Inputs
Input Description Mappable To Type Mandatory
Access Control Entry Name Select Access Control Entry name.​ Apic​Tenant​L4L7Node​Access​Entry​Control​Identity Y
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​NAME Tenant Name on which the selected operation was performed gen_​text_​input
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
SERVICE_​GRAPH Service Graph gen_​text_​input
TENANT_​L4L7_​SERVICE_​GRAPH_​NODE_​IDENTITY APIC Tenant Service Graph Node Identity Apic​Tenant​L4L7Service​Graph​Node​Identity
OUTPUT_​TENANT_​L4L7_​NODE_​ACL_​IDENTITY APIC Tenant Service Graph Node ACL Identity Apic​Tenant​L4L7Node​Acl​Identity
OUTPUT_​TENANT_​L4L7_​NODE_​ACCESS_​CONTROL_​ENTRY_​IDENTITY APIC Tenant Service Graph Node Access Control Entry Identity Apic​Tenant​L4L7Node​Access​Entry​Control​Identity

Delete ACL Entry From APIC Function Node

Summary
Delete an ACL entry from a function node via APIC.
Description
This task deletes an ACL entry from a function node on the APIC Controller.
Inputs
Input Description Mappable To Type Mandatory
ACL Name Select an ACL List name.​ Apic​Tenant​L4L7Node​Acl​Identity Y
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​NAME Tenant Name on which the selected operation was performed gen_​text_​input
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
SERVICE_​GRAPH Service Graph gen_​text_​input
TENANT_​L4L7_​SERVICE_​GRAPH_​NODE_​IDENTITY APIC Tenant Service Graph Node Identity Apic​Tenant​L4L7Service​Graph​Node​Identity
OUTPUT_​TENANT_​L4L7_​NODE_​ACL_​IDENTITY APIC Tenant Service Graph Node ACL Identity Apic​Tenant​L4L7Node​Acl​Identity

Delete APIC Function Node from L4-L7 Service Graph

Summary
Delete a function node from an L4-L7 service graph.
Description
This task deletes a function node From an L4-L7 service graph on the APIC controller.
Inputs
Input Description Mappable To Type Mandatory
Node Select an APIC Function Node from L4-L7 service graph.​ Apic​Tenant​L4L7Service​Graph​Node​Identity Y
Do you want to delete the selected Function Node from Service graph? Do you want to delete the selected Function Node from Service graph? Y
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​NAME Tenant Name on which the selected operation was performed gen_​text_​input
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
SERVICE_​GRAPH Service Graph gen_​text_​input
TENANT_​SERVICE_​GRAPH_​IDENTITY APIC Tenant Bidirectional Service Graph Identity Apic​Device​Tenant​Service​Graph​Identity
TENANT_​L4L7_​SERVICE_​GRAPH_​NODE_​IDENTITY APIC Tenant Service Graph Node Identity Apic​Tenant​L4L7Service​Graph​Node​Identity

Delete Bridge Group Interface From APIC Function Node

Summary
Delete bridge group interface from a function node.
Description
This task deletes a bridge group interface from a function node.
Inputs
Input Description Mappable To Type Mandatory
Bridge Group Interface Name Select Bridge Group Interface name.​ Apic​Tenant​Bridge​Group​Interface​Identity Y
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​NAME Tenant Name on which the selected operation was performed gen_​text_​input
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
SERVICE_​GRAPH Service Graph gen_​text_​input
TENANT_​SERVICE_​GRAPH_​IDENTITY APIC Tenant Bidirectional Service Graph Identity Apic​Device​Tenant​Service​Graph​Identity
TENANT_​L4L7_​SERVICE_​GRAPH_​NODE_​IDENTITY APIC Tenant Service Graph Node Identity Apic​Tenant​L4L7Service​Graph​Node​Identity
TENANT_​BRIDGE_​GROUP_​INTERFACE_​IDENTITY APIC Tenant Bridge Group Interface Identity Apic​Tenant​Bridge​Group​Interface​Identity

Delete Function Config Parameters From APIC Function Node

Summary
Deletes function config parameters from a function node.
Description
This task deletes function config parameters from a function node. It requires an external interface and an internal interface as input.
Inputs
Input Description Mappable To Type Mandatory
External Interface Select External Interface from Function Node.​ Apic​Tenant​Function​Config​Ex​Intf​Identity Y
Internal Interface Select Internal Interface from Function Node.​ Apic​Tenant​Function​Config​In​Intf​Identity Y
Do you want to delete the selected Network Object from Function Node? Do you want to delete the selected Network Object from Function Node? Y
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​NAME Tenant Name on which the selected operation was performed gen_​text_​input
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
SERVICE_​GRAPH Service Graph gen_​text_​input
TENANT_​SERVICE_​GRAPH_​IDENTITY APIC Tenant Bidirectional Service Graph Identity Apic​Device​Tenant​Service​Graph​Identity
TENANT_​L4L7_​SERVICE_​GRAPH_​NODE_​IDENTITY APIC Tenant Service Graph Node Identity Apic​Tenant​L4L7Service​Graph​Node​Identity
TENANT_​FUNCTION_​CONFIG_​PARAMETER_​IDENTITY APIC Tenant Function Config Parameter Identity gen_​text_​input

Delete Interface From APIC Function Node

Summary
Delete an interface from a function node.
Description
This task deletes n interface from a function node on the APIC controller.
Inputs
Input Description Mappable To Type Mandatory
Interface Name Select Interface From an APIC Function Node.​ Apic​Tenant​L4L7Node​Interface​Identity Y
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​NAME Tenant Name on which the selected operation was performed gen_​text_​input
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
SERVICE_​GRAPH Service Graph gen_​text_​input
TENANT_​SERVICE_​GRAPH_​IDENTITY APIC Tenant Bidirectional Service Graph Identity Apic​Device​Tenant​Service​Graph​Identity
TENANT_​L4L7_​SERVICE_​GRAPH_​NODE_​IDENTITY APIC Tenant Service Graph Node Identity Apic​Tenant​L4L7Service​Graph​Node​Identity
TENANT_​L4L7_​SERVICE_​GRAPH_​NODE_​INTERFACE_​IDENTITY APIC Tenant Service Graph Node Interface Identity gen_​text_​input

Delete Load Balancer Parameters From APIC Function Node

Summary
Delete load balancer parameters from a function node.
Description
This task deletes load balancer parameters from a function node on the APIC controller.
Inputs
Input Description Mappable To Type Mandatory
Node Select a node.​ Apic​Tenant​LBParameterized​Node​Identity Y
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​NAME Tenant Name on which the selected operation was performed gen_​text_​input
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
SERVICE_​GRAPH Service Graph gen_​text_​input
TENANT_​EPG APIC Tenant EPG gen_​text_​input
TENANT_​CONTRACT APIC Tenant Contract gen_​text_​input

Delete Network Object Parameters From APIC Function Node

Summary
Delete network object parameters from a function node.
Description
This task deletes network object parameters from a function node. A network object is required as input.
Inputs
Input Description Mappable To Type Mandatory
Network Object Name Select Network Object Parameters From an APIC Function Node.​ Apic​Tenant​Network​Object​Identity Y
Do you want to delete the selected Network Object from Function Node? Do you want to delete the selected Network Object from Function Node? Y
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​NAME Tenant Name on which the selected operation was performed gen_​text_​input
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
SERVICE_​GRAPH Service Graph gen_​text_​input
TENANT_​SERVICE_​GRAPH_​IDENTITY APIC Tenant Bidirectional Service Graph Identity Apic​Device​Tenant​Service​Graph​Identity
TENANT_​L4L7_​SERVICE_​GRAPH_​NODE_​IDENTITY APIC Tenant Service Graph Node Identity Apic​Tenant​L4L7Service​Graph​Node​Identity
TENANT_​NETWORK_​OBJECT_​PARAMETER_​IDENTITY APIC Tenant Network Object Parameter Identity Apic​Tenant​Network​Object​Identity

Update Connection to Node in APIC

Summary
Update a connection to a node.
Description
This task updates a connection to a node on the APIC controller.
Inputs
Input Description Mappable To Type Mandatory
Connection Select Connection of Node.​ Apic​Device​Tenant​Service​Graph​Node​Connection​Identity
Adjacency Type Select L2 or L3 Adjacency Type.​ Default Adjacency Type is L2.​ gen_​text_​input
Unicast Route Check to enable Unicast Route.​ Default Route value is checked.​
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​NAME Tenant Name on which the selected operation was performed gen_​text_​input
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
SERVICE_​GRAPH Service Graph gen_​text_​input
TENANT_​SERVICE_​GRAPH_​IDENTITY APIC Tenant Bidirectional Service Graph Identity Apic​Device​Tenant​Service​Graph​Identity
TENANT_​SERVICE_​GRAPH_​NODE_​CONNECTION_​IDENTITY APIC Tenant Connection to Node Identity Apic​Device​Tenant​Service​Graph​Node​Connection​Identity