APIC - Access Policies - Interface Policies Operations

This chapter contains the following sections:

Add Interface To APIC Interface Profile

Summary
Add an interface to an interface profile.
Description
This task adds an interface to an interface profile on the APIC controller.
Inputs
Input Description Mappable To Type Mandatory
Interface Profile Select Interface Profile.​ Apic​Device​Tenant​Interface​Profile​Identity Y
Path Type Choose a path type.​ The type can be Port, Direct Port Channel or Virtual Port Channel.​ The default value is 'Port'.​ gen_​text_​input Y
Path Select Static Path.​ Apic​Device​Static​Path​Identity Y
Target DSCP Enter Target DSCP.​ The valid range is 0 to 64.​ gen_​text_​input
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​NAME Tenant Name on which the selected operation was performed gen_​text_​input
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
TENANT_​EXTERNAL_​BRIDGED_​NETWORK_​IDENTITY External Bridged Network Identity Apic​Device​Tenant​External​Bridge​Network​Identity
OUTPUT_​TENANT_​NODE_​PROFILE_​IDENTITY Node Profile Identity Apic​Device​Tenant​Node​Profile​Identity
OUTPUT_​TENANT_​INTERFACE_​PROFILE_​IDENTITY Interface Profile Identity Apic​Device​Tenant​Interface​Profile​Identity
FABRIC_​PHYSICAL_​INTERFACE_​IDENTITY APIC Physical Interface Identity Apic​Fabric​Physical​Interface​Identity

Add Routed Interface to Logical Interface Profile

Summary
Add routed interface to a logical interface profile.
Description
This task adds a routed interface profile to a logical interface profile on the APIC controller.
Inputs
Input Description Mappable To Type Mandatory
Logical Interface Profile Select Logical Interface Profile.​ Apic​Device​Tenant​Logical​Interface​Profile​Identity Y
Routed Interface Check this option for Routed Interface Configuration.​ By default, this box is checked.​ Y
Routed Path Select Routed Path.​ Apic​Device​Static​Path​Identity Y
Routed IP Address Enter Routed IP Address.​ For example: 31.​31.​31.​1.​ ipaddress Y
Routed IP Prefix Enter Routed IP Prefix.​ The valid range is 0 to 30.​ gen_​text_​input Y
Routed MAC Address Enter Routed MAC address.​ Format: E.​E.​E, EE-EE-EE-EE-EE-EE, EE:EE:EE:EE:EE:EE or EEEE.​EEEE.​EEEE.​ gen_​text_​input
Routed MTU(bytes) Enter Routed MTU value, MTU should be in the range 1500 to 9216.​ The default value is 1500.​ gen_​text_​input Y
Routed Target DSCP Enter Routed Target DSCP.​ The valid range is 0 to 64.​ gen_​text_​input
Link-local address Enter the Link Local Address in IPv6 format.​ For example: 1a:2b:3c:4d:5e:6f:7g:8h.​ gen_​text_​input
SVI Check this option to configure SVI.​ By default, this field is unchecked.​ Y
SVI Path Type Choose SVI path type.​ The type can be Port, Direct Port Channel, Virtual Port Channel.​ The default value is 'Port'.​ gen_​text_​input Y
SVI Path Select SVI path.​ Apic​Device​Static​Path​Identity Y
SVI Encapsulation Enter Encapsulation for SVI.​ Format example: vlan-1.​ gen_​text_​input
SVI IP Address Enter SVI IP Address.​ Format example: 31.​31.​31.​1.​ gen_​text_​input Y
Link-local address Enter the Link Local Address in IPv6 format.​ Ex 1a:2b:3c:4d:5e:6f:7g:8h.​ gen_​text_​input
Side A SVI IP Address Enter SVI IP Address for side A.​ Format example: 31.​31.​31.​1.​ ipaddress Y
Side B SVI IP Address Enter SVI IP Address for side B.​ Format example: 31.​31.​31.​1.​ ipaddress Y
SVI MAC Address Enter SVI MAC address.​Format: E.​E.​E or EE-EE-EE-EE-EE-EE or EE:EE:EE:EE:EE:EE or EEEE.​EEEE.​EEEE.​ gen_​text_​input
SVI MTU(bytes) Enter SVI MTU value, MTU should be in the range 1500 to 9216.​ The default value is 1500.​ gen_​text_​input Y
SVI Target DSCP Enter SVI Target DSCP.​ The valid range is 0 to 64.​ gen_​text_​input
Mode Choose Mode.​ The mode can be Access (802.​1P), Trunk or Access (Untagged).​ The default value is 'Trunk'.​ gen_​text_​input
Routed Sub-Interface Check this option to configure Routed sub interface.​ By default, this field is unchecked.​ Y
Routed Sub Interface Path Select Routed Sub Interface Path.​ Apic​Device​Static​Path​Identity Y
Routed Sub Interface Encapsulation Enter Encapsulation for Routed sub interface .​ Format example: vlan-1.​ gen_​text_​input
Routed Sub Interface IP Address Enter Routed sub interface IP Address.​ Format example: 31.​31.​31.​1.​ ipaddress Y
Routed Sub Interface IP Prefix Enter Routed sub interface Prefix.​ The valid range is 0 to 30.​ gen_​text_​input Y
Routed Sub Interface MAC Address Enter Routed sub interface MAC address.​Format: E.​E.​E, EE-EE-EE-EE-EE-EE, EE:EE:EE:EE:EE:EE or EEEE.​EEEE.​EEEE.​ gen_​text_​input
Routed Sub Interface MTU(bytes) Enter Routed sub interface MTU value, MTU should be in the range 1500 to 9216.​ The default value is 1500.​ gen_​text_​input Y
Routed Sub Interface Target DSCP Enter Routed sub interface Target DSCP.​ The valid range is 0 to 64.​ gen_​text_​input
Link-local address Enter the Link Local Address in IPv6 format.​ For example: 1a:2b:3c:4d:5e:6f:7g:8h.​ gen_​text_​input
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​NAME Tenant Name on which the selected operation was performed gen_​text_​input
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
TENANT_​EXTERNAL_​ROUTED_​NETWORK_​IDENTITY External Routed Network Identity Apic​Device​Tenant​L3Out​Identity
OUTPUT_​TENANT_​LOGICAL_​NODE_​PROFILE_​IDENTITY Logical Node Profile Identity Apic​Device​Tenant​Logical​Node​Profile​Identity
OUTPUT_​TENANT_​LOGICAL_​INTERFACE_​PROFILE_​IDENTITY Logical Interface Profile Identity Apic​Device​Tenant​Logical​Interface​Profile​Identity
FABRIC_​PHYSICAL_​INTERFACE_​IDENTITY APIC Physical Interface Identity Apic​Fabric​Physical​Interface​Identity
FABRIC_​PHYSICAL_​SVI_​INTERFACE_​IDENTITY APIC Physical SVI Interface Identity gen_​text_​input
FABRIC_​PHYSICAL_​ROUTED_​SUB_​INTERFACE_​IDENTITY APIC Physical Routed Sub Interface Identity gen_​text_​input

Create APIC LLDP Interface Policy

Summary
Create an LLDP interface policy.
Description
This task creates a link layer discovery protocol (LLDP) interface policy on the APIC controller.
Inputs
Input Description Mappable To Type Mandatory
Select Account Select an APIC account.​ Apic​Device​Identity Y
Name Enter LLDP Interface Policy name.​ gen_​text_​input Y
Description Enter a description of the LLDP Interface Policy.​ Up to 128 characters are allowed.​ gen_​text_​input
Receive State Select enabled or disabled to enable or disable Receive State.​ Default state is enabled.​ gen_​text_​input
Transmit State Select enabled or disabled to enable or disable Transmit State.​ Default state is enabled.​ gen_​text_​input
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
FABRIC_​LLDP_​INTERFACE_​POLICY Fabric LLDP Interface policy gen_​text_​input
FABRIC_​LLDP_​INTERFACE_​POLICY_​IDENTITY Fabric LLDP Interface policy Identity Apic​Fabric​LLDPInterface​Policy​Identity

Create APIC Port Channel Policy

Summary
Description
Inputs
Input Description Mappable To Type Mandatory
Select Account Select an APIC account.​ Apic​Device​Identity Y
Name Enter Port Channel Policy name.​ gen_​text_​input Y
Description Enter a description of the Port Channel Policy.​ Up to 128 characters are allowed.​ gen_​text_​input
Mode Select Mode of Port Channel.​ Default Mode is Static Channel - Mode On.​ gen_​text_​input
Fast Select Hot Standby Ports Check to enable Fast Select Hot Standby Ports.​ Default value is checked.​ Boolean
Graceful Convergence Check to enable Graceful Convergence.​ Default value is checked.​ Boolean
Load Defer Member Ports Check to enable Load Defer Member Ports.​ Default value is unchecked.​ Boolean
Suspend Individual Port Check to enable Suspend Individual Port.​ Default value is checked.​ Boolean
Minimum Number of Links: Enter Minimum number of links between 1 and 16.​ gen_​text_​input Y
Maximum Number of Links: Enter Maximum number of links between 1 and 16.​ gen_​text_​input Y
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
FABRIC_​PORT_​CHANNEL_​POLICY Fabric Port Channel policy gen_​text_​input
FABRIC_​PORT_​CHANNEL_​POLICY_​IDENTITY Fabric Port Channel policy Identity Apic​Fabric​Port​Channel​Policy​Identity

Create APIC VPC Domain Policy

Summary
Create an APIC VPC domain policy.
Description
This task creates a virtual port channel (VPC) domain policy on APIC.
Inputs
Input Description Mappable To Type Mandatory
Select Account Select an APIC account to add a VPC Domain Policy.​ Apic​Device​Identity Y
VPC Domain Name Enter VPC peer Domain name.​ gen_​text_​input Y
Description Enter additional description to VPC peer Domain.​ Up to 128 characters are allowed.​ gen_​text_​input
Peer Dead Interval Enter peer dead interval between 5 and 600.​ Default value is 200.​ gen_​text_​input Y
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
OUTPUT_​VPC_​DOMAIN_​POLICY Fabric VPC Domain policy gen_​text_​input
OUTPUT_​VPC_​DOMAIN_​POLICY_​IDENTITY Fabric VPC Domain policy Identity Apic​Fabric​VPCDomain​Identity

Create APIC VPC Explicit Protection Group

Summary
Description
Inputs
Input Description Mappable To Type Mandatory
APIC Account Name Select an APIC account name.​ Apic​Device​Identity Y
Name Enter a name.​ gen_​text_​input Y
Id Enter Logical pair Id between 1 and 1000.​ gen_​text_​input Y
VPC Domain Policy Select VPC Domain Policy.​ Apic​Fabric​VPCDomain​Identity
Switch 1 Select Switch 1.​ Apic​Fabric​Leaf​Active​Node​Identity Y
Switch 2 Select Switch 2.​ Apic​Fabric​Leaf​Active​Node​Identity Y
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
FABRIC_​VPC_​NAME VPC Fabric Name gen_​text_​input
FABRIC_​VPC_​ID VPC Fabric Id gen_​text_​input
FABRIC_​VPC_​IDENTITY VPC Fabric Name Identity Apic​Fabric​VPCExplicit​Protection​Group​Identity
FABRIC_​VPC_​DOMAIN_​POLICY_​IDENTITY VPC Fabric Domain Identity Apic​Fabric​VPCDomain​Identity
FABRIC_​VPC_​SWITCH_​ONE_​IDENTITY VPC Fabric Switch One Identity Apic​Fabric​Leaf​Active​Node​Identity
OUTPUT_​FABRIC_​VPC_​SWITCH_​TWO_​IDENTITY VPC Fabric Switch Two Identity Apic​Fabric​Leaf​Active​Node​Identity

Create APIC vPC Interface Policy Group

Summary
Create a vPC interface policy group.
Description
This task creates a vPC interface policy group on the APIC controller.
Inputs
Input Description Mappable To Type Mandatory
APIC Account Name Select an APIC account name.​ Apic​Device​Identity Y
Name Enter a policy group name.​ gen_​text_​input Y
Description Enter a description.​ The description can be up to 128 alphanumeric characters.​ gen_​text_​input
Link Level Policy Select Link level policy.​ Apic​Fabric​Link​Level​Policy​Identity
CDP Policy Select CDP Policy.​ Apic​Fabric​CDPInterface​Policy​Identity
LLDP Policy Select LLDP Policy.​ Apic​Fabric​LLDPInterface​Policy​Identity
Attached Entity Profile Select Attached Entity Profile.​ Apic​Associated​Attachable​Entity​Profile​Identity
Port-Channel Policy Select Port-Channel Policy.​ Apic​Fabric​Port​Channel​Policy​Identity
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
VPC_​INTERFACE_​POLICY_​GROUP v​PC Interface Policy Group Name gen_​text_​input
VPC_​INTERFACE_​POLICY_​GROUP_​IDENTITY v​PC Interface Policy Group Name Identity Apic​Fabric​Interface​Policy​Group​Identity
FABRIC_​LINK_​LEVEL_​POLICY Fabric Link Level policy gen_​text_​input
FABRIC_​LINK_​LEVEL_​POLICY_​IDENTITY Fabric Link Level policy Identity Apic​Fabric​Link​Level​Policy​Identity
FABRIC_​CDP_​INTERFACE_​POLICY Fabric CDP Interface policy gen_​text_​input
FABRIC_​CDP_​INTERFACE_​POLICY_​IDENTITY Fabric CDP Interface policy Identity Apic​Fabric​CDPInterface​Policy​Identity
FABRIC_​LLDP_​INTERFACE_​POLICY Fabric LLDP Interface policy gen_​text_​input
FABRIC_​LLDP_​INTERFACE_​POLICY_​IDENTITY Fabric LLDP Interface policy Identity Apic​Fabric​LLDPInterface​Policy​Identity
ENTITY_​PROFILE Associated Attachable Entity Profile gen_​text_​input
ENTITY_​PROFILE_​IDENTITY Associated Attachable Entity Profile Identity Apic​Associated​Attachable​Entity​Profile​Identity
FABRIC_​PORT_​CHANNEL_​POLICY Fabric Port Channel policy gen_​text_​input
FABRIC_​PORT_​CHANNEL_​POLICY_​IDENTITY Fabric Port Channel policy Identity Apic​Fabric​Port​Channel​Policy​Identity

Create Access Switch Policy Group in APIC

Summary
Create access switch policy group in APIC.
Description
This task creates an access switch policy group on the APIC controller.
Inputs
Input Description Mappable To Type Mandatory
Select Account Select APIC Account Apic​Device​Identity Y
Name Enter an APIC Switch Policy Group name.​ gen_​text_​input Y
Description Enter an additional description of the APIC Switch Policy Group.​ Up to 128 characters are allowed.​ gen_​text_​input
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
FABRIC_​LEAF_​POLICY_​GROUP Fabric Leaf Policy Group gen_​text_​input
FABRIC_​LEAF_​POLICY_​GROUP_​IDENTITY Fabric Leaf Policy Group Identity Apic​Fabric​Switch​Leaf​Policy​Group​Identity

Create CDP Interface Policy in APIC

Summary
Create a CDP Interface policy.
Description
This task creates a Cisco discovery protocol (CDP) interface policy on the APIC controller.
Inputs
Input Description Mappable To Type Mandatory
Select Account Select an APIC account.​ Apic​Device​Identity Y
Name Enter a CDP Interface Policy name.​ gen_​text_​input Y
Description Enter additional description of CDP Interface Policy.​ Up to 128 characters are allowed.​ gen_​text_​input
Admin State Select a state to enabled or disabled to Admin.​ Default value is enabled gen_​text_​input
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
FABRIC_​CDP_​INTERFACE_​POLICY Fabric CDP Interface policy gen_​text_​input
FABRIC_​CDP_​INTERFACE_​POLICY_​IDENTITY Fabric CDP Interface policy Identity Apic​Fabric​CDPInterface​Policy​Identity

Create Leaf Access Port Policy Group in APIC

Summary
Create leaf access port policy group in APIC.
Description
This task creates a leaf access port policy group on the APIC controller.
Inputs
Input Description Mappable To Type Mandatory
APIC Account Name Provide APIC Account Name Apic​Device​Identity Y
Access Port Policy Group Name Access Port Policy Group Name gen_​text_​input Y
Description Description gen_​text_​input
Link Level Policy Link Level Policy Apic​Fabric​Link​Level​Policy​Identity
CDP Policy CDP Policy Apic​Fabric​CDPInterface​Policy​Identity
LLDP Policy LLDP Policy Apic​Fabric​LLDPInterface​Policy​Identity
Attached Entity Profile Attached Entity Profile Apic​Associated​Attachable​Entity​Profile​Identity
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
ACCESS_​PORT_​POLICY_​GROUP Access Port Policy Group Name gen_​text_​input
ACCESS_​PORT_​POLICY_​GROUP_​IDENTITY Access Port Policy Group Name Identity Apic​Fabric​Interface​Policy​Group​Identity
FABRIC_​LINK_​LEVEL_​POLICY Fabric Link Level policy gen_​text_​input
FABRIC_​LINK_​LEVEL_​POLICY_​IDENTITY Fabric Link Level policy Identity Apic​Fabric​Link​Level​Policy​Identity
FABRIC_​CDP_​INTERFACE_​POLICY Fabric CDP Interface policy gen_​text_​input
FABRIC_​CDP_​INTERFACE_​POLICY_​IDENTITY Fabric CDP Interface policy Identity Apic​Fabric​CDPInterface​Policy​Identity
FABRIC_​LLDP_​INTERFACE_​POLICY Fabric LLDP Interface policy gen_​text_​input
FABRIC_​LLDP_​INTERFACE_​POLICY_​IDENTITY Fabric LLDP Interface policy Identity Apic​Fabric​LLDPInterface​Policy​Identity
ENTITY_​PROFILE Associated Attachable Entity Profile gen_​text_​input
ENTITY_​PROFILE_​IDENTITY Associated Attachable Entity Profile Identity Apic​Associated​Attachable​Entity​Profile​Identity

Create Leaf Profile in APIC

Summary
Create leaf profile in APIC.
Description
This task creates a leaf profile on the APIC controller.
Inputs
Input Description Mappable To Type Mandatory
Select Account Select an APIC account.​ Apic​Device​Identity Y
Name Enter an APIC Switch Profile name.​ gen_​text_​input Y
Description Enter additional description about an APIC Switch profile.​ Up to 128 characters are allowed.​ gen_​text_​input
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
FABRIC_​SWITCH_​PROFILE Fabric Switch Profile gen_​text_​input
FABRIC_​SWITCH_​PROFILE_​IDENTITY Fabric Switch Profile Identity Apic​Fabric​Switch​Profile​Identity

Create Link Level Policy in APIC

Summary
Create a link level policy.
Description
This task creates a link level policy on the APIC controller.
Inputs
Input Description Mappable To Type Mandatory
Select Account Select an APIC account.​ Apic​Device​Identity Y
Name Enter Link Level Policy name.​ gen_​text_​input Y
Description Enter additional description about Link Level Policy.​ Up to 128 characters are allowed.​ gen_​text_​input
Auto Negotiation Select On or Off for Auto Negotiation.​ Default value is on.​ gen_​text_​input
Speed Select Link Level Policy Speed.​ Default Speed value is 10G.​ gen_​text_​input
Link debounce interval(msec) Enter Link debounce interval (msec) between 0 and 5000.​ Default interval value is 100.​ gen_​text_​input Y
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
FABRIC_​LINK_​LEVEL_​POLICY Fabric Link Level policy gen_​text_​input
FABRIC_​LINK_​LEVEL_​POLICY_​IDENTITY Fabric Link Level policy Identity Apic​Fabric​Link​Level​Policy​Identity

Create PC Interface APIC Policy Group

Summary
Create a PC interface policy group.
Description
This task creates a PC interface policy group on the APIC controller.
Inputs
Input Description Mappable To Type Mandatory
APIC Account Name Select an APIC account name.​ Apic​Device​Identity Y
Name Enter a policy group name.​ gen_​text_​input Y
Description Enter a description.​ The description can be up to 128 alphanumeric characters.​ gen_​text_​input
Link Level Policy Select Link level policy Apic​Fabric​Link​Level​Policy​Identity
CDP Policy Select CDP Policy Apic​Fabric​CDPInterface​Policy​Identity
LLDP Policy Select LLDP Policy Apic​Fabric​LLDPInterface​Policy​Identity
Attached Entity Profile Select Attached Entity Profile Apic​Associated​Attachable​Entity​Profile​Identity
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
PC_​INTERFACE_​POLICY_​GROUP PC Interface Policy Group Name gen_​text_​input
PC_​INTERFACE_​POLICY_​GROUP_​IDENTITY PC Interface Policy Group Name Identity Apic​Fabric​Interface​Policy​Group​Identity
FABRIC_​LINK_​LEVEL_​POLICY Fabric Link Level policy gen_​text_​input
FABRIC_​LINK_​LEVEL_​POLICY_​IDENTITY Fabric Link Level policy Identity Apic​Fabric​Link​Level​Policy​Identity
FABRIC_​CDP_​INTERFACE_​POLICY Fabric CDP Interface policy gen_​text_​input
FABRIC_​CDP_​INTERFACE_​POLICY_​IDENTITY Fabric CDP Interface policy Identity Apic​Fabric​CDPInterface​Policy​Identity
FABRIC_​LLDP_​INTERFACE_​POLICY Fabric LLDP Interface policy gen_​text_​input
FABRIC_​LLDP_​INTERFACE_​POLICY_​IDENTITY Fabric LLDP Interface policy Identity Apic​Fabric​LLDPInterface​Policy​Identity
ENTITY_​PROFILE Associated Attachable Entity Profile gen_​text_​input
ENTITY_​PROFILE_​IDENTITY Associated Attachable Entity Profile Identity Apic​Associated​Attachable​Entity​Profile​Identity

Delete APIC LLDP Interface Policy

Summary
Delete an LLDP interface policy.
Description
This task deletes a link layer discovery protocol (LLDP) interface policy on the APIC controller.
Inputs
Input Description Mappable To Type Mandatory
Name Select an APIC LLDP Interface Policy.​ Apic​Fabric​LLDPInterface​Policy​Identity Y
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
FABRIC_​LLDP_​INTERFACE_​POLICY Fabric LLDP Interface policy gen_​text_​input
FABRIC_​LLDP_​INTERFACE_​POLICY_​IDENTITY Fabric LLDP Interface policy Identity Apic​Fabric​LLDPInterface​Policy​Identity

Delete APIC PC Interface Policy Group

Summary
Delete a PC interface policy group.
Description
This task deletes a PC interface policy group on the APIC controller.
Inputs
Input Description Mappable To Type Mandatory
PC Interface Policy Group Name Select a PC Interface Policy Group name.​ Apic​Fabric​Interface​Policy​Group​Identity Y
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
PC_​INTERFACE_​POLICY_​GROUP PC Interface Policy Group Name gen_​text_​input
PC_​INTERFACE_​POLICY_​GROUP_​IDENTITY PC Interface Policy Group Name Identity Apic​Fabric​Interface​Policy​Group​Identity

Delete APIC Port Channel Policy

Summary
Description
Inputs
Input Description Mappable To Type Mandatory
Name Select an APIC Port Channel Policy.​ Apic​Fabric​Port​Channel​Policy​Identity Y
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
FABRIC_​PORT_​CHANNEL_​POLICY Fabric Port Channel policy gen_​text_​input
FABRIC_​PORT_​CHANNEL_​POLICY_​IDENTITY Fabric Port Channel policy Identity Apic​Fabric​Port​Channel​Policy​Identity

Delete APIC VPC Domain Policy

Summary
Delete an APIC (VPC) domain policy.
Description
This task deletes a virtual port channel (VPC) domain policy from APIC.
Inputs
Input Description Mappable To Type Mandatory
VPC Domain Name Select VPC Domain name from an APIC.​ Apic​Fabric​VPCDomain​Identity Y
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
OUTPUT_​VPC_​DOMAIN_​POLICY Fabric VPC Domain policy gen_​text_​input
OUTPUT_​VPC_​DOMAIN_​POLICY_​IDENTITY Fabric VPC Domain policy Identity Apic​Fabric​VPCDomain​Identity

Delete APIC VPC Explicit Protection Group

Summary
Description
Inputs
Input Description Mappable To Type Mandatory
VPC Explicit Protection Name Select a VPC Explicit Protection name.​ Apic​Fabric​VPCExplicit​Protection​Group​Identity Y
Do you want to delete the selected VPC Explicit Protection Name? Y
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
FABRIC_​VPC_​NAME VPC Fabric Name gen_​text_​input
FABRIC_​VPC_​ID VPC Fabric Id gen_​text_​input
FABRIC_​VPC_​IDENTITY VPC Fabric Name Identity Apic​Fabric​VPCExplicit​Protection​Group​Identity

Delete APIC vPC Interface Policy Group

Summary
Delete an vPC interface policy group.
Description
This task deletes a vPC interface policy group from the APIC controller.
Inputs
Input Description Mappable To Type Mandatory
v​PC Interface Policy Group Name Select a v​PC Interface Policy Group name.​ Apic​Fabric​Interface​Policy​Group​Identity Y
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
VPC_​INTERFACE_​POLICY_​GROUP v​PC Interface Policy Group Name gen_​text_​input
VPC_​INTERFACE_​POLICY_​GROUP_​IDENTITY v​PC Interface Policy Group Name Identity Apic​Fabric​Interface​Policy​Group​Identity

Delete Access Switch Policy Group in APIC

Summary
Delete access switch policy group in APIC.
Description
This task deletes an access switch policy group on the APIC controller.
Inputs
Input Description Mappable To Type Mandatory
Name Select Leaf Policy Group.​ Apic​Fabric​Switch​Leaf​Policy​Group​Identity Y
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
FABRIC_​LEAF_​POLICY_​GROUP Fabric Leaf Policy Group gen_​text_​input
FABRIC_​LEAF_​POLICY_​GROUP_​IDENTITY Fabric Leaf Policy Group Identity Apic​Fabric​Switch​Leaf​Policy​Group​Identity

Delete CDP Interface Policy in APIC

Summary
Delete a CDP interface policy.
Description
This task deletes a Cisco discovery protocol (CDP) interface policy on the APIC controller.
Inputs
Input Description Mappable To Type Mandatory
Name Select CDP Interface Policy.​ Apic​Fabric​CDPInterface​Policy​Identity Y
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
FABRIC_​CDP_​INTERFACE_​POLICY Fabric CDP Interface policy gen_​text_​input
FABRIC_​CDP_​INTERFACE_​POLICY_​IDENTITY Fabric CDP Interface policy Identity Apic​Fabric​CDPInterface​Policy​Identity

Delete Leaf Access Port Policy Group in APIC

Summary
Delete leaf access port policy group in APIC.
Description
This task deletes a leaf access port policy group on the APIC controller.
Inputs
Input Description Mappable To Type Mandatory
Access Port Policy Group Name Select the name of the Access Port Policy Group to be removed.​ Apic​Fabric​Interface​Policy​Group​Identity Y
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
ACCESS_​PORT_​POLICY_​GROUP Access Port Policy Group Name gen_​text_​input
ACCESS_​PORT_​POLICY_​GROUP_​IDENTITY Access Port Policy Group Name Identity Apic​Fabric​Interface​Policy​Group​Identity

Delete Leaf Profile in APIC

Summary
Delete leaf profile in APIC.
Description
This task deletes a leaf profile from the APIC controller.
Inputs
Input Description Mappable To Type Mandatory
Name Select an APIC Switch profile Apic​Fabric​Switch​Profile​Identity Y
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
FABRIC_​SWITCH_​PROFILE Fabric Switch Profile gen_​text_​input
FABRIC_​SWITCH_​PROFILE_​IDENTITY Fabric Switch Profile Identity Apic​Fabric​Switch​Profile​Identity

Delete Link Level Policy in APIC

Summary
Delete a link level policy.
Description
This task deletes a link level policy on the APIC controller.
Inputs
Input Description Mappable To Type Mandatory
Name Select an APIC Link Level Policy Group name.​ Apic​Fabric​Link​Level​Policy​Identity Y
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
FABRIC_​LINK_​LEVEL_​POLICY Fabric Link Level policy gen_​text_​input
FABRIC_​LINK_​LEVEL_​POLICY_​IDENTITY Fabric Link Level policy Identity Apic​Fabric​Link​Level​Policy​Identity

Update CDP Interface Policy in APIC

Summary
Update a CDP interface policy.
Description
This task updates a Cisco discovery protocol (CDP) interface policy on the APIC controller.
Inputs
Input Description Mappable To Type Mandatory
Name Select CDP Interface Policy.​ Apic​Fabric​CDPInterface​Policy​Identity Y
Description Enter a description of the CDP Interface Policy.​ Up to 128 characters are allowed.​ gen_​text_​input
Admin State Select enabled or disabled to enable or disable Admin State.​ gen_​text_​input
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
FABRIC_​CDP_​INTERFACE_​POLICY Fabric CDP Interface policy gen_​text_​input
FABRIC_​CDP_​INTERFACE_​POLICY_​IDENTITY Fabric CDP Interface policy Identity Apic​Fabric​CDPInterface​Policy​Identity