EMC Unity - Create iSCSI Portal
- Summary
- Create a new iSCSI portal on an EMC Unity array.
- Description
-
This task creates an iSCSI Portal on an EMC Unity storage array.
Only one IPv4 and one IPv6 iSCSI interface per VLAN on physical port is allowed
Input Format:
- EMC Unity Account Name: podName@AccountName. For example: Vblock@Unity_Hybrid
- EMC Unity Ethernet Port: podName@accountName@spName@id@iportName@ipPortId. For example: Default Pod@EmcUnity@SP A@spa@SP A I/O Module 0 Ethernet Port 0@spa_iom_0_eth0
- IP Address: Valid IPv4 or IPv6 Address
- Subnet Mask or Prefix Length: Valid IPv4 Address for IPv4 Address or a valid prefix Length for IPv6 Address.
- Gateway: Valid IPv4 Address
- VLAN ID: Only change this value if you have configured your switch port to support VLAN tagging of multiple VLAN IDs. The network will not work properly if this value is set incorrectly
- Inputs
-
Input Description Mappable To Type Mandatory EMC Unity Account Select EMC Unity Account to create iSCSI portal EMCUnityAccountIdentity Y EMC Unity Ethernet Port Select EMC Unity Ethernet Port to create iSCSI portal EMCUnityEthernetPortIdentity Y IP Address Enter the network address in IPv4 or IPv6 format for the portal gen_text_input Y Subnet Mask/Prefix Length Enter the subnet mask if IPv4, or prefix length in the range 1 to 128 if IPv6, for the network address gen_text_input Y VLAN ID Enter a virtual LAN identifier for the network address in the range 1 to 4094 gen_text_input Gateway Enter a gateway address for the network address gen_text_input - Outputs
-
Output Description Type OUTPUT_EMC_UNITY_ACCOUNT_IDENTITY EMC Unity Account Identity. EMCUnityAccountIdentity OUTPUT_EMC_UNITY_ISCSI_PORTAL_IDENTITY EMC Unity iSCSI Portal Identity EMCUnityIscsiPortalIdentity OUTPUT_EMC_UNITY_ETHERNET_PORT_IDENTITY EMC Unity Ethernet Port Identity EMCUnityEthernetPortIdentity OUTPUT_EMC_UNITY_ISCSI_PORTAL_IP_ADDRESS EMC Unity iSCSI Portal IP Address gen_text_input OUTPUT_EMC_UNITY_ISCSI_PORTAL_IQN EMC Unity iSCSI Portal IQN gen_text_input