APIC - External Routed Network Operations

This chapter contains the following sections:

Add APIC Match Community Factor To Match Community Term

Summary
Add APIC Match Community Factor To Match Community Term.
Description
This task adds a match community factor to a match community term.
Inputs
Input Description Mappable To Type Mandatory
Match Community Term Select a match community term.​ APICMatch​Community​Term​Identity Y
Community Enter a community name.​The community name can be regular:as2-nn2:4:15, extended:as4-nn2:4:15 gen_​text_​input Y
Scope APICMatch​Community​Factor​Scope​Identity
Description Enter a description for the match community factor, up to 128 alphanumeric characters.​ gen_​text_​input
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​NAME Tenant Name on which the selected operation was performed gen_​text_​input
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
OUTPUT_​TENANT_​MATCH_​RULE_​IDENTITY APIC Tenant's Match Rule Identity APIC Match Rule Identity
OUTPUT_​TENANT_​MATCH_​COMMUNITY_​TERM_​IDENTITY Match Community Term Identity APICMatch​Community​Term​Identity
OUTPUT_​TENANT_​MATCH_​COMMUNITY_​FACTOR_​IDENTITY Match Community Factor Identity APICMatch​Community​Factor​Identity

Add APIC Match Community Term To Match Rule for Route Map

Summary
Add APIC Match Community Term To Match Rule for Route Map.
Description
This task adds a match community term to a match rule for a route map.
Inputs
Input Description Mappable To Type Mandatory
Match Rule Select a match rule.​ APIC Match Rule Identity Y
Match Community Term Name Enter a unique name for the match community term.​The name can be up to 64 alphanumeric characters.​ Special characters allowed are [ - , _​ , .​ , : ].​ gen_​text_​input Y
Description Enter a description for the match community term, up to 128 alphanumeric characters.​ gen_​text_​input
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​NAME Tenant Name on which the selected operation was performed gen_​text_​input
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
OUTPUT_​TENANT_​MATCH_​RULE_​IDENTITY APIC Tenant's Match Rule Identity APIC Match Rule Identity
OUTPUT_​TENANT_​MATCH_​COMMUNITY_​TERM_​IDENTITY Match Community Term Identity APICMatch​Community​Term​Identity

Add APIC Match Prefix To Match Rule

Summary
Add APIC Match Prefix To Match Rule.
Description
This task adds a match prefix to the match rules available in an APIC EPG.
Inputs
Input Description Mappable To Type Mandatory
Match Rule Select a Match Rule.​ APIC Match Rule Identity Y
IP Address Enter the IPv4 or IPV6 address.​ For example, 2.​2.​2.​2 or 1:1:1:1:2:2:2:2.​ gen_​text_​input Y
Aggregate Check to enable or disable Aggregate.​ Boolean
Description Enter a description for the match prefix, up to 128 alphanumeric characters.​ gen_​text_​input
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​NAME Tenant Name on which the selected operation was performed gen_​text_​input
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
OUTPUT_​TENANT_​MATCH_​RULE_​IDENTITY APIC Tenant's Match Rule Identity APIC Match Rule Identity
OUTPUT_​TENANT_​MATCH_​RULE_​NAME APIC Tenant's Match Rule gen_​text_​input
OUTPUT_​MATCH_​PREFIX_​NAME APIC Match Prefix Name on which the selected operation was performed gen_​text_​input
OUTPUT_​MATCH_​PREFIX_​IDENTITY APIC Match Prefix Identity MATCH_​PREFIX_​IDENTITY

Add APIC Next Hop Address To Static Route

Summary
Add APIC Next Hop Address To Static Route.
Description
This task adds a next hop address to a static route.
Inputs
Input Description Mappable To Type Mandatory
Static Route Select Static Route Apic​Device​Tenant​Static​Route​To​Logical​Node​Identity Y
Next Hop IP Address Enter Next Hop IP ipaddress Y
Preference Enter preference.​ gen_​text_​input
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
TENANT_​EXTERNAL_​ROUTED_​NETWORK_​IDENTITY External Routed Network Identity Apic​Device​Tenant​L3Out​Identity
OUTPUT_​TENANT_​LOGICAL_​NODE_​PROFILE_​IDENTITY Logical Node Profile Identity Apic​Device​Tenant​Logical​Node​Profile​Identity
OUTPUT_​TENANT_​LOGICAL_​NODE_​IDENTITY Logical Node Identity Apic​Device​Tenant​Logical​Node​Identity
OUTPUT_​TENANT_​STATIC_​ROUTE_​TO_​LOGICAL_​NODE_​IDENTITY Static Route To Logical Node Identity Apic​Device​Tenant​Static​Route​To​Logical​Node​Identity
OUTPUT_​TENANT_​NEXT_​HOP_​TO_​STATIC_​ROUTE_​IDENTITY Next HOP Address to Static Route Identity APIC_​TENANT_​NEXT_​HOP_​IDENTITY

Add APIC Route Control Profile to External Network

Summary
Add APIC Route Control Profile to External Network.
Description
This task adds a route control profile to an external network.
Inputs
Input Description Mappable To Type Mandatory
External Network Name Select the external network.​ Apic​Tenant​External​Network​To​External​Routed​Network​Identity Y
Customize Route Control Profile Name? Check to customize the route control profile name.​ Defaults to unchecked.​ Boolean
Route Control Profile Name Click to select a route control profile.​ Apic​Device​Tenant​Routed​Profile​To​Ext​Routed​Network​Identity Y
Route Control Profile Name Enter route control profile name.​ gen_​text_​input Y
Direction Choose route import policy or route export policy as the direction.​ The default value is route import policy.​ APICRoute​Control​Profile​Direction​LOVType​Identity
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​NAME Tenant Name on which the selected operation was performed gen_​text_​input
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
TENANT_​EXTERNAL_​ROUTED_​NETWORK_​NAME External Routed Network Name gen_​text_​input
TENANT_​EXTERNAL_​ROUTED_​NETWORK_​IDENTITY External Routed Network Identity Apic​Device​Tenant​L3Out​Identity
TENANT_​EXTERNAL_​NETWORK_​NAME External Network Name gen_​text_​input
TENANT_​EXTERNAL_​NETWORK_​IDENTITY External Network Identity Apic​Device​External​Network​Identity
OUTPUT_​TENANT_​ROUTE_​CONTROL_​PROFILE_​NAME Route Control Profile Name gen_​text_​input
OUTPUT_​TENANT_​ROUTE_​CONTROL_​PROFILE_​DIRECTION Route Control Profile Direction APICRoute​Control​Profile​Direction​LOVType​Identity
OUTPUT_​TENANT_​ROUTE_​CONTROL_​PROFILE_​TO_​EXTERNAL_​NETWORK_​IDENTITY Route Control Profile to External Network Identity APIC_​DEVICE_​TENANT_​ROUTE_​CONTROL_​PROFILE_​TO_​EXTERNAL_​NETWORK_​IDENTITY

Add APIC Route Control Profile to Subnet

Summary
Add APIC Route Control Profile to Subnet.
Description
This task adds a route control profile to a subnet.
Inputs
Input Description Mappable To Type Mandatory
Subnet Address Select a subnet address.​ Apic​Tenant​Subnet​To​External​Network​Identity Y
Customize Route Control Profile Name? Check to customize the route control profile name.​ Defaults to unchecked.​ Boolean
Route Control Profile Name Click to select a route control profile.​ Apic​Device​Tenant​Routed​Profile​To​Ext​Routed​Network​Identity Y
Route Control Profile Name Enter route control profile name.​ gen_​text_​input Y
Direction Choose route import policy or route export policy as the direction.​ The default value is route import policy.​ APICRoute​Control​Profile​Direction​LOVType​Identity
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​NAME Tenant Name on which the selected operation was performed gen_​text_​input
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
TENANT_​EXTERNAL_​ROUTED_​NETWORK_​NAME External Routed Network Name gen_​text_​input
TENANT_​EXTERNAL_​ROUTED_​NETWORK_​IDENTITY External Routed Network Identity Apic​Device​Tenant​L3Out​Identity
TENANT_​EXTERNAL_​NETWORK_​NAME External Network Name gen_​text_​input
TENANT_​EXTERNAL_​NETWORK_​IDENTITY External Network Identity Apic​Device​External​Network​Identity
TENANT_​EXTERNAL_​NETWORK_​SUBNET_​ADDRESS Subnet Address for External Network gen_​text_​input
OUTPUT_​TENANT_​ROUTE_​CONTROL_​PROFILE_​NAME Route Control Profile Name gen_​text_​input
OUTPUT_​TENANT_​ROUTE_​CONTROL_​PROFILE_​DIRECTION Route Control Profile Direction APICRoute​Control​Profile​Direction​LOVType​Identity
OUTPUT_​TENANT_​ROUTE_​CONTROL_​PROFILE_​IDENTITY Route Control Profile Identity APIC_​DEVICE_​TENANT_​ROUTE_​CONTROL_​PROFILE_​IDENTITY

Add AS Number to Set AS Path - Prepend AS

Summary
Add AS Number to Set AS Path - Prepend AS.
Description
This task adds AS Number to Set AS Path - Prepend AS in Set Rules for Route Map on the APIC controller.
Inputs
Input Description Mappable To Type Mandatory
Set AS Path Select an set as path criteria.​ APIC_​TENANT_​SET_​AS_​PATH_​SET_​PROFILE_​TERM_​IDENTITY Y
ASN Enter an asn.​ gen_​text_​input
Order Enter an order.​ gen_​text_​input
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
DEVICE_​TENANT_​ACTION_​RULE_​PROFILE_​IDENTITY Action Rule Profile Identity Apic​Device​Tenant​Action​Rule​Profile​Identity
OUTPUT_​TENANT_​SET_​AS_​PATH_​SET_​RULE_​PROFILE_​IDENTITY APIC Tenant Set As Path to Set Profile identity APIC_​TENANT_​SET_​AS_​PATH_​SET_​PROFILE_​TERM_​IDENTITY
OUTPUT_​TENANT_​AS_​NUMBER_​TO_​SET_​AS_​PATH_​IDENTITY APIC Tenant AS Number to Set AS Path Identity APIC Tenant AS Number to Set AS Path Identity

Add Additional communities to Set Rules

Summary
Add Additional communities to Set Rules.
Description
This task adds additional communities to set rules on the APIC controller.
Inputs
Input Description Mappable To Type Mandatory
Set Rule Profile Name Select an action rule profile name to add additional communities to it.​ Apic​Device​Tenant​Action​Rule​Profile​Identity Y
Community Enter community in the following format: regular:as2-nn2:4:15 , extended:as4-nn2:5:16 , no-export , no-advertise gen_​text_​input Y
Criteria Choose the criteria.​
Description Enter the description.​ gen_​text_​input
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​NAME Tenant Name on which the selected operation was performed gen_​text_​input
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
DEVICE_​TENANT_​ACTION_​RULE_​PROFILE_​NAME Action Rule Profile Name gen_​text_​input
DEVICE_​TENANT_​ACTION_​RULE_​PROFILE_​IDENTITY Action Rule Profile Identity Apic​Device​Tenant​Action​Rule​Profile​Identity
OUTPUT_​TENANT_​MATCH_​REGEX_​COMMUNITY_​TERM_​IDENTITY APIC Tenant Additional Community to Set Profile identity APIC_​TENANT_​ADDITIONAL_​COMMUNITY_​SET_​PROFILE_​TERM_​IDENTITY

Add Context to Route Maps or Profiles in APIC External Routed Network

Summary
Add Context to Route Maps/Profiles in APIC External Routed Network.
Description
This task adds context to route maps and profiles in an APIC external routed network for a tenant on the APIC controller.
Inputs
Input Description Mappable To Type Mandatory
Route Profile Route Profile Apic​Device​Tenant​Routed​Profile​To​Ext​Routed​Network​Identity Y
Context Name Context Name gen_​text_​input Y
Order Order gen_​text_​input Y
Action Choose permit or deny as the action.​ The default value is permit.​ APIC Route Profile Context Action Identity
Description Description gen_​text_​input
Action Rule Profile Name Action Rule Profile Name Apic​Device​Tenant​Action​Rule​Profile​Identity
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​NAME Tenant Name on which the selected operation was performed gen_​text_​input
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
TENANT_​EXTERNAL_​ROUTED_​NETWORK_​NAME External Routed Network Name gen_​text_​input
TENANT_​EXTERNAL_​ROUTED_​NETWORK_​IDENTITY External Routed Network Identity Apic​Device​Tenant​L3Out​Identity
TENANT_​ROUTED_​PROFILE_​NAME Routed Profile Name gen_​text_​input
TENANT_​ROUTED_​PROFILE_​IDENTITY Routed Profile Name Identity Apic​Device​Tenant​Routed​Profile​To​Ext​Routed​Network​Identity
TENANT_​EXTERNAL_​NETWORK_​CONTEXT_​NAME Context Name gen_​text_​input
TENANT_​EXTERNAL_​NETWORK_​CONTEXT_​IDENTITY Context Identity Apic​Tenant​Context​To​Route​Profile​Identity
DEVICE_​TENANT_​ACTION_​RULE_​PROFILE_​IDENTITY Action Rule Profile Identity Apic​Device​Tenant​Action​Rule​Profile​Identity

Add External Network To APIC External Routed Network

Summary
Add an external network to an external routed network.
Description
This task adds an external network to an external routed network for a tenant on the APIC controller.
Inputs
Input Description Mappable To Type Mandatory
External Routed Network Select an external routed network.​ Apic​Device​Tenant​L3Out​Identity Y
External Network Name Enter the external network name.​ gen_​text_​input Y
Description Enter a short description for external network.​ gen_​text_​input
Alias Enter an alias, a changeable name for an object.​ Unlike the name of an object, the alias can be changed.​ gen_​text_​input
Tags Select comma separated Tag(s).​ Apic​Device​Tag​Identity
QOS Choose level1, level2, level3, unspecified, custom as Qo​S class.​ The default value is unspecified.​ gen_​text_​input
Contract Exception Tag Enter the contract exception tag.​ gen_​text_​input
DSCP Target Select DSCP target value between 0 to 64.​ The default value is unspecified.​ Apic​Custom​Qos​Policy​Dscp​Target​Identity
Enter DSCP Target Enter DSCP target value between 0 to 64.​ The default value is unspecified.​ gen_​text_​input
Preferred Group Member Choose include or exclude as preferred group member.​ The default value is blank.​ APIC Exclude or Include Type
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​NAME Tenant Name on which the selected operation was performed gen_​text_​input
TENANT_​EXTERNAL_​ROUTED_​NETWORK_​NAME External Routed Network Name gen_​text_​input
TENANT_​EXTERNAL_​ROUTED_​NETWORK_​IDENTITY External Routed Network Identity Apic​Device​Tenant​L3Out​Identity
TENANT_​EXTERNAL_​NETWORK_​NAME External Network Name gen_​text_​input
TENANT_​EXTERNAL_​NETWORK_​IDENTITY External Network in External Routed Network Identity Apic​Tenant​External​Network​To​External​Routed​Network​Identity
DEVICE_​EXTERNAL_​NETWORK_​IN_​OUTSIDE_​NETWORK_​IDENTITY External Network in Outside Network Identity Apic​Device​External​Network​In​Outside​Network​Identity
TENANT_​EXTERNAL_​NETWORK_​ALIAS External Network Alias Name gen_​text_​input
TENANT_​EXTERNAL_​NETWORK_​TAGS_​IDENTITY External Network Tags Identity Apic​Device​Tag​Identity
QOS Qo​S gen_​text_​input

Add Logical Interface Profile To APIC Logical Node Profile

Summary
Add a logical interface profile to a logical node profile.
Description
This task adds a logical interface profile to a logical node profile on the APIC controller.
Inputs
Input Description Mappable To Type Mandatory
Logical Node Profile Name Specify Logical Node Profile Name Apic​Device​Tenant​Logical​Node​Profile​Identity Y
Logical Interface Profile Name Enter Logical Interface Profile Name gen_​text_​input Y
Description Logical Interface Profile Description gen_​text_​input
ND Policy Select ND Interface Policy Name.​ Apic​Device​Tenant​NDInterface​Policy​Identity
Egress Data Plane Policing Policy Select an egress data plane policing policy.​ APIC Data Plane Policing Policy Identity
Ingress Data Plane Policing Policy Select an ingress data plane policing policy.​ APIC Data Plane Policing Policy Identity
Qo​S Priority Choose Priority.​ The priority level of the Qo​S can be unspecified, level1, level2 or level3.​ The default value is 'unspecified'.​ Apic​Custom​Qos​Priority​Identity
Custom Qo​S Policy Select an custom Qo​S policy name.​ Apic​Tenant​Custom​Qos​Policy​Identity
IGMP Policy Select IGMP interface policy name.​ INTERFACE_​POLICY_​IDENTITY
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​NAME Tenant Name on which the selected operation was performed gen_​text_​input
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
TENANT_​EXTERNAL_​ROUTED_​NETWORK_​NAME External Routed Network Name gen_​text_​input
TENANT_​EXTERNAL_​ROUTED_​NETWORK_​IDENTITY External Routed Network Identity Apic​Device​Tenant​L3Out​Identity
OUTPUT_​TENANT_​LOGICAL_​NODE_​PROFILE Logical Node Profile Name gen_​text_​input
OUTPUT_​TENANT_​LOGICAL_​NODE_​PROFILE_​IDENTITY Logical Node Profile Identity Apic​Device​Tenant​Logical​Node​Profile​Identity
OUTPUT_​TENANT_​LOGICAL_​INTERFACE_​PROFILE_​NAME Logical Interface Profile Name gen_​text_​input
OUTPUT_​TENANT_​LOGICAL_​INTERFACE_​PROFILE_​IDENTITY Logical Interface Profile Identity Apic​Device​Tenant​Logical​Interface​Profile​Identity

Add Logical Node to Logical Node Profile of APIC External Routed Network

Summary
Description
Inputs
Input Description Mappable To Type Mandatory
Logical Node Profile Name Choose a logical node profile name.​ Apic​Device​Tenant​Logical​Node​Profile​Identity Y
Node Select a node.​ Apic​Fabric​Node​Identity Y
Router ID Enter a router ID.​ gen_​text_​input Y
Use Router ID as Loopback Address Choose true to use router ID as loopback address.​ The default value is unspecified.​ APICCheck​Box​Trueor​False​Type
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​NAME Tenant Name on which the selected operation was performed gen_​text_​input
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
TENANT_​EXTERNAL_​ROUTED_​NETWORK_​NAME External Routed Network Name gen_​text_​input
TENANT_​EXTERNAL_​ROUTED_​NETWORK_​IDENTITY External Routed Network Identity Apic​Device​Tenant​L3Out​Identity
OUTPUT_​TENANT_​LOGICAL_​NODE_​PROFILE Logical Node Profile Name gen_​text_​input
OUTPUT_​TENANT_​LOGICAL_​NODE_​PROFILE_​IDENTITY Logical Node Profile Identity Apic​Device​Tenant​Logical​Node​Profile​Identity
OUTPUT_​TENANT_​LOGICAL_​NODE_​IDENTITY Logical Node Identity Apic​Device​Tenant​Logical​Node​Identity

Add Match Regex Community Term To Match Rule

Summary
Add Match Regex Community Term To Match Rule.
Description
This task adds an match regex community term to a match rule under external routed networks on the APIC controller.
Inputs
Input Description Mappable To Type Mandatory
Match Rule Select a match rule to add match regex community term.​ APIC Match Rule Identity Y
Match Regex Community Name Enter a unique name for the match regex community name.​ gen_​text_​input Y
Regular Expression Enter regular expression.​ gen_​text_​input
Community Type Select community type.​ Default community type is regular APIC Match Regex Community Type Identity
Description Enter a short description for the match regex community term.​ The description can be up to 128 alphanumeric characters.​ gen_​text_​input
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​NAME Tenant Name on which the selected operation was performed gen_​text_​input
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
OUTPUT_​TENANT_​MATCH_​RULE_​IDENTITY APIC Tenant's Match Rule Identity APIC Match Rule Identity
OUTPUT_​TENANT_​MATCH_​REGEX_​COMMUNITY_​TERM_​NAME Match Regex Community Term Name gen_​text_​input
OUTPUT_​TENANT_​MATCH_​REGEX_​COMMUNITY_​TERM_​IDENTITY Match Regex Community Term Identity APIC Match Regex Community Term Identity

Add Route Map or Profile to APIC External Routed Network

Summary
Add a route map/profile to APIC external routed network.
Description
This task creates a route map or profile to an external routed network for a tenant on the APIC controller.
Inputs
Input Description Mappable To Type Mandatory
External Routed Network Select an external routed network.​ Apic​Device​Tenant​L3Out​Identity Y
Route Control Profile Name Choose default-import or default-export or enter customized value as route control profile name.​ The default value is unspecified.​ ROUTE_​CONTROL_​PROFILE_​NAME_​IDENTITY
Enter Route Control Profile Name Enter route control profile name.​
Type Choose Match Prefix AND Route Policy, Match Routing Policy Only as type.​ The default value is Match Prefix AND Route Policy.​ ROUTE_​CONTROL_​PROFILE_​TYPE_​IDENTITY
Description Enter a short description for routed control profile.​
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​NAME Tenant Name on which the selected operation was performed gen_​text_​input
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
TENANT_​EXTERNAL_​ROUTED_​NETWORK_​NAME External Routed Network Name gen_​text_​input
TENANT_​EXTERNAL_​ROUTED_​NETWORK_​IDENTITY External Routed Network Identity Apic​Device​Tenant​L3Out​Identity
TENANT_​ROUTED_​PROFILE_​NAME Routed Profile Name gen_​text_​input
TENANT_​ROUTED_​PROFILE_​IDENTITY Routed Profile Name Identity Apic​Device​Tenant​Routed​Profile​To​Ext​Routed​Network​Identity

Add Set AS Path to Set Rules

Summary
Add Set AS Path to Set Rules.
Description
This task adds Set AS Path to the set rules on the APIC controller.
Inputs
Input Description Mappable To Type Mandatory
Set Rule Profile Name Select an action rule profile name to add set as path to it.​ Apic​Device​Tenant​Action​Rule​Profile​Identity Y
Criteria Choose the criteria.​ APIC_​SET_​AS_​PATH_​SET_​RULES_​CRITERIA_​IDENTITY Y
Count Enter the count.​ gen_​text_​input
ASN Enter an asn.​ gen_​text_​input
Order Enter an order.​ gen_​text_​input
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
DEVICE_​TENANT_​ACTION_​RULE_​PROFILE_​IDENTITY Action Rule Profile Identity Apic​Device​Tenant​Action​Rule​Profile​Identity
OUTPUT_​TENANT_​SET_​AS_​PATH_​SET_​RULE_​PROFILE_​IDENTITY APIC Tenant Set As Path to Set Profile identity APIC_​TENANT_​SET_​AS_​PATH_​SET_​PROFILE_​TERM_​IDENTITY

Add Static Route To Logical Node in APIC

Summary
Add a static route to a logical node.
Description
This task adds static route information to a logical node.
Inputs
Input Description Mappable To Type Mandatory
Node Select a node.​ Apic​Device​Tenant​Logical​Node​Identity Y
Static Route Prefix Provide a static route prefix.​ gen_​text_​input Y
Preference Enter preference within a range 1 - 255.​ The default value is 1.​ gen_​text_​input
Route Control BFD Check to enable route control BFD.​ Defaults to unchecked.​ Boolean
Next Hop IP Provide next hop IP.​ ipaddress
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​NAME Tenant Name on which the selected operation was performed gen_​text_​input
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
TENANT_​EXTERNAL_​ROUTED_​NETWORK_​NAME External Routed Network Name gen_​text_​input
TENANT_​EXTERNAL_​ROUTED_​NETWORK_​IDENTITY External Routed Network Identity Apic​Device​Tenant​L3Out​Identity
OUTPUT_​TENANT_​LOGICAL_​NODE_​PROFILE Logical Node Profile Name gen_​text_​input
OUTPUT_​TENANT_​LOGICAL_​NODE_​PROFILE_​IDENTITY Logical Node Profile Identity Apic​Device​Tenant​Logical​Node​Profile​Identity
OUTPUT_​TENANT_​STATIC_​ROUTE_​IP Static Route IP ipaddress
OUTPUT_​TENANT_​STATIC_​ROUTE_​IP_​PREFIX Static Route IP Prefix gen_​text_​input
OUTPUT_​TENANT_​STATIC_​ROUTE_​NEXT_​HOP_​IP Static Route Next​Hop IP ipaddress
OUTPUT_​TENANT_​STATIC_​ROUTE_​TO_​LOGICAL_​NODE_​IDENTITY Static Route To Logical Node Identity Apic​Device​Tenant​Static​Route​To​Logical​Node​Identity
OUTPUT_​TENANT_​LOGICAL_​NODE_​IDENTITY Logical Node Identity Apic​Device​Tenant​Logical​Node​Identity

Add Subnet To APIC External Network

Summary
Add a subnet to an external network.
Description
This task adds a subnet to an external network for a tenant on the APIC controller.
Inputs
Input Description Mappable To Type Mandatory
External Network Name Select an external network name.​ Apic​Tenant​External​Network​To​External​Routed​Network​Identity Y
Subnet Address Enter the subnet address in the format i.​i.​i.​i.​ For example: 10.​12.​2.​3.​ ipaddress Y
Subnet Prefix Enter the subnet prefix.​ Valid Subnet prefix in the range (0-30).​ gen_​text_​input
Scope
Export Route Control Subnet Check this option to set the Export Route Control Subnet.​ By default, this field is unchecked.​ Boolean
Import Route Control Subnet Check this option to set the Import Route Control Subnet.​ By default, this field is unchecked.​ Boolean
External Subnets for the External EPG Check this option to set the External Subnet for the External EPG.​ By default, this field is checked.​ Boolean
Shared Route Control Subnet Check this option to set the Shared Route Control Subnet.​ By default, this field is unchecked.​ Boolean
Shared Security Import Subnet Check this option to set the Shared Security Import Subnet.​ By default, this field is unchecked.​ Boolean
Aggregate
Aggregate Export Check this option to set the Aggregate Export.​ By default, this field is unchecked.​ Boolean
Aggregate Import Check this option to set the Aggregate Import.​ By default, this field is unchecked.​ Boolean
Aggregate shared Routes Check this option to set the Aggregate Shared Routes.​ By default, this field is unchecked.​ Boolean
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​NAME Tenant Name on which the selected operation was performed gen_​text_​input
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
TENANT_​EXTERNAL_​ROUTED_​NETWORK_​NAME External Routed Network Name gen_​text_​input
TENANT_​EXTERNAL_​ROUTED_​NETWORK_​IDENTITY External Routed Network Identity Apic​Device​Tenant​L3Out​Identity
TENANT_​EXTERNAL_​NETWORK_​NAME External Network Name gen_​text_​input
TENANT_​EXTERNAL_​NETWORK_​IDENTITY External Network Identity Apic​Device​External​Network​Identity
TENANT_​EXTERNAL_​NETWORK_​SUBNET_​ADDRESS Subnet Address for External Network gen_​text_​input

Associate Match Rules to Route Control Context in APIC External Routed Network

Summary
Associate Match Rules to Route Control Context in APIC External Routed Network.
Description
This task associates match rules to a route control context in an APIC external routed network on the APIC controller.
Inputs
Input Description Mappable To Type Mandatory
Route Control Context Select a route control context.​ Apic​Tenant​Context​To​Route​Profile​Identity Y
Match Rule Name Select a match rule name to be associated.​ APIC Match Rule Identity Y
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​NAME Tenant Name on which the selected operation was performed gen_​text_​input
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
TENANT_​EXTERNAL_​ROUTED_​NETWORK_​IDENTITY External Routed Network Identity Apic​Device​Tenant​L3Out​Identity
TENANT_​ROUTED_​PROFILE_​IDENTITY Routed Profile Name Identity Apic​Device​Tenant​Routed​Profile​To​Ext​Routed​Network​Identity
TENANT_​EXTERNAL_​NETWORK_​CONTEXT_​IDENTITY Context Identity Apic​Tenant​Context​To​Route​Profile​Identity
OUTPUT_​TENANT_​MATCHED_​RULES_​TO_​ERN_​ROUTE_​PROFILE_​CONTEXT_​IDENTITY APIC Matched Rules To ERN Route Profile Context Identity APIC_​TENANT_​ASSOCIATE_​MATCHED_​RULES_​TO_​ERN_​ROUTE_​PROFILE_​CONTEXT_​IDENTITY
OUTPUT_​TENANT_​MATCH_​RULE_​IDENTITY APIC Tenant's Match Rule Identity APIC Match Rule Identity

Create APIC EIGRP Interface Profile

Summary
Create an EIGRP interface profile.
Description
This task creates an EIGRP interface profile on the APIC controller.
Inputs
Input Description Mappable To Type Mandatory
Logical Interface Profile Name Select Logical Interface Profile name.​ Apic​Device​Tenant​Logical​Interface​Profile​Identity Y
Name Enter the EIGRP interface policy name.​ gen_​text_​input Y
Description Enter the description.​ The description can be up to 128 alphanumeric characters.​ gen_​text_​input
Select EIGRP Interface Policy Select EIGRP Interface Policy.​ Apic​Device​Tenant​EIGRPInterface​Identity Y
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​NAME Tenant Name on which the selected operation was performed gen_​text_​input
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
TENANT_​EXTERNAL_​ROUTED_​NETWORK_​IDENTITY External Routed Network Identity Apic​Device​Tenant​L3Out​Identity
OUTPUT_​TENANT_​LOGICAL_​NODE_​PROFILE_​IDENTITY Logical Node Profile Identity Apic​Device​Tenant​Logical​Node​Profile​Identity
OUTPUT_​TENANT_​LOGICAL_​INTERFACE_​PROFILE_​IDENTITY Logical Interface Profile Identity Apic​Device​Tenant​Logical​Interface​Profile​Identity
TENANT_​LOGICAL_​EIGRP_​INTERFACE_​PROFILE Tenant Logical EIGRP Interface Profile gen_​text_​input
DEVICE_​TENANT_​EIGRP_​INTERFACE_​IDENTITY Tenant Logical EIGRP Interface Profile Identity Apic​Device​Tenant​Logical​EIGRPInterface​Profile​Identity

Create APIC Logical OSPF Interface Profile

Summary
Create a logical OSPF interface profile.
Description
This task creates a logical open shortest path first (OSPF) interface profile on the APIC controller.
Inputs
Input Description Mappable To Type Mandatory
Logical Interface Profile Name Select a Logical Interface Profile name.​ Apic​Device​Tenant​Logical​Interface​Profile​Identity Y
Name Enter the logical OSPF interface profile name.​ gen_​text_​input Y
Description Enter the description.​ The description can be up to 128 alphanumeric characters.​ gen_​text_​input
Authentication Key Enter the authentication key.​ password
Confirm Authentication Key Enter the same authentication key for confirmation.​ password
Authentication Key ID Enter the authentication key ID.​ The key ID is a numeric value.​ gen_​text_​input
Authentication Type Select Authentication Type.​ Apic​Logical​OSPFInterface​Authentication​Type
Associated OSPF Interface Policy Name Select Associated OSPF Interface Policy name.​ Apic​Device​Tenant​OSPFInterface​Identity
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​NAME Tenant Name on which the selected operation was performed gen_​text_​input
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
TENANT_​EXTERNAL_​ROUTED_​NETWORK_​IDENTITY External Routed Network Identity Apic​Device​Tenant​L3Out​Identity
OUTPUT_​TENANT_​LOGICAL_​NODE_​PROFILE_​IDENTITY Logical Node Profile Identity Apic​Device​Tenant​Logical​Node​Profile​Identity
OUTPUT_​TENANT_​LOGICAL_​INTERFACE_​PROFILE_​IDENTITY Logical Interface Profile Identity Apic​Device​Tenant​Logical​Interface​Profile​Identity
TENANT_​LOGICAL_​OSPF_​INTERFACE_​PROFILE Tenant Logical OSPF Interface Profile gen_​text_​input
TENANT_​LOGICAL_​OSPF_​INTERFACE_​PROFILE_​IDENTITY Tenant Logical OSPF Interface Profile Identity Apic​Device​Tenant​Logical​OSPFInterface​Profile​Identity

Create APIC Match Rule for a Route Map

Summary
Create APIC Match Rule for a Route Map.
Description
This task creates an APIC match rule for a route map.
Inputs
Input Description Mappable To Type Mandatory
Tenant Name Select a tenant name.​ Apic​Device​Tenant​Identity Y
Match Rule Name Enter a unique name for the match rule gen_​text_​input Y
Match Rule Description Enter a short description for the match rule.​ The description can be up to 128 alphanumeric characters.​ gen_​text_​input
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​NAME Tenant Name on which the selected operation was performed gen_​text_​input
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
OUTPUT_​TENANT_​MATCH_​RULE_​IDENTITY APIC Tenant's Match Rule Identity APIC Match Rule Identity
OUTPUT_​TENANT_​MATCH_​RULE_​NAME APIC Tenant's Match Rule gen_​text_​input

Create BGP Peer Connectivity To Node Profile in APIC

Summary
Create a BGP peer connection to a node profile.
Description
This task creates a border gateway (BGP) peer connection to a node profile on the APIC controller.
Inputs
Input Description Mappable To Type Mandatory
Logical Node Profile Name Select a Logical Node Profile name.​ Apic​Device​Tenant​Logical​Node​Profile​Identity Y
Peer Address Enter Peer Address in the format i.​i.​i.​i.​ For example: 2.​2.​2.​2.​ ipaddress Y
Description Enter a Node Profile description.​ The description can be up to 128 alphanumeric characters.​ gen_​text_​input
Send Extended Community Check Send Extended Community either true or false.​ The default value is false.​
Send Community Check Send Community either true or false.​ The default value is false.​
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​NAME Tenant Name on which the selected operation was performed gen_​text_​input
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
TENANT_​EXTERNAL_​ROUTED_​NETWORK_​NAME External Routed Network Name gen_​text_​input
TENANT_​EXTERNAL_​ROUTED_​NETWORK_​IDENTITY External Routed Network Identity Apic​Device​Tenant​L3Out​Identity
OUTPUT_​TENANT_​LOGICAL_​NODE_​PROFILE Logical Node Profile Name gen_​text_​input
OUTPUT_​TENANT_​LOGICAL_​NODE_​PROFILE_​IDENTITY Logical Node Profile Identity Apic​Device​Tenant​Logical​Node​Profile​Identity
OUTPUT_​TENANT_​BGP_​PEER_​CONNECTIVITY BGP Peer Connectivity Profile gen_​text_​input
OUTPUT_​TENANT_​BGP_​PEER_​CONNECTIVITY_​IDENTITY BGP Peer Connectivity Profile Identity Apic​Device​Tenant​BGPPeer​Connectivity​Profile​Identity

Create Logical Node Profile To APIC External Routed Network

Summary
Create a logical node profile to an external routed network.
Description
This task creates a logical node profile to an external routed network on the APIC controller.
Inputs
Input Description Mappable To Type Mandatory
External Routed Network Select an external routed network.​ Apic​Device​Tenant​L3Out​Identity Y
Name Provide logical node profile name.​ gen_​text_​input Y
Description Provide logical node profile description.​ gen_​text_​input
DSCP Target Select DSCP target value between 0 to 64.​ The default value is unspecified.​ Apic​Custom​Qos​Policy​Dscp​Target​Identity
Enter DSCP Target Enter target DSCP.​ gen_​text_​input
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​NAME Tenant Name on which the selected operation was performed gen_​text_​input
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
TENANT_​EXTERNAL_​ROUTED_​NETWORK_​NAME External Routed Network Name gen_​text_​input
TENANT_​EXTERNAL_​ROUTED_​NETWORK_​IDENTITY External Routed Network Identity Apic​Device​Tenant​L3Out​Identity
OUTPUT_​TENANT_​LOGICAL_​NODE_​PROFILE Logical Node Profile Name gen_​text_​input
OUTPUT_​TENANT_​LOGICAL_​NODE_​PROFILE_​IDENTITY Logical Node Profile Identity Apic​Device​Tenant​Logical​Node​Profile​Identity

Create Routed Outside in APIC

Summary
Create Routed Outside in APIC.
Description
This task creates routed outside in an APIC external routed network for a tenant on the APIC controller.
Inputs
Input Description Mappable To Type Mandatory
Tenant Name Select a tenant name.​ Apic​Device​Tenant​Identity Y
External Routed Network Name Enter the external routed network name.​ gen_​text_​input Y
Description Enter a short description for external routed network.​ gen_​text_​input
Alias Enter external routed network alias.​
Tags Provide tags.​ Apic​Device​Tag​Identity
Network Provide network.​ Apic​Device​Tenant​Private​Network​Identity
External Routed Domain Select external routed domain.​ Apic​Device​Tenant​Routed​Domain​Identity
BGP Check to enable BGP.​ Defaults to unchecked.​ gen_​text_​input
OSPF Check to enable OSPF.​ Defaults to unchecked.​ gen_​text_​input
OSPF Area ID Provide OSPF area ID.​ gen_​text_​input
OSPF Area Type Choose NSSA area or regular area of stub area as area type.​ The default value is NSSA area.​ gen_​text_​input
EIGRP Check to enable EIGRP mode.​ Defaults to unchecked.​ gen_​text_​input
Autonomous System Number Provide autonomous system number between 1-8000 gen_​text_​input
PIM Check to choose option PIM.​ Defaults to unchecked.​ Boolean
Target DSCP Select DSCP target value.​ The default value is empty Apic​Custom​Qos​Policy​Dscp​Target​Identity
Enter Target DSCP Enter target DSCP value between 0 to 64.​ The default value is empty.​ gen_​text_​input
Route Profile for Interleak Select route profile for interleak.​ APIC_​TENANT_​EXTERNAL_​ROUTED_​NETWORK_​ROUTE_​PROFILE_​INTERLEAK_​IDENTITY
Provider Label Enter provider label.​ gen_​text_​input
Consumer Label Enter consumer label.​ gen_​text_​input
Route Control Enforcement
Export gen_​text_​input
Import Check to enable/disable the import mode.​ Defaults to unchecked.​ gen_​text_​input
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​NAME Tenant Name on which the selected operation was performed gen_​text_​input
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
TENANT_​PRIVATE_​NETWORK Private Network on which the selected operation was performed gen_​text_​input
PRIVATE_​NETWORK_​IDENTITY Private Network Identity Apic​Device​Tenant​Private​Network​Identity
TENANT_​EXTERNAL_​ROUTED_​NETWORK_​NAME External Routed Network Name gen_​text_​input
TENANT_​EXTERNAL_​ROUTED_​NETWORK_​IDENTITY External Routed Network Identity Apic​Device​Tenant​L3Out​Identity
TENANT_​EXTERNAL_​ROUTED_​DOMAIN_​IDENTITY External Routed Domain Identity Apic​Device​Tenant​Routed​Domain​Identity
TENANT_​EXTERNAL_​NETWORK_​TAGS_​IDENTITY External Network Tags Identity Apic​Device​Tag​Identity
TENANT_​EXTERNAL_​NETWORK_​OSPF_​ID External Network OSPF Id gen_​text_​input
TENANT_​EXTERNAL_​NETWORK_​OSPF_​AREA_​TYPE External Network OSPF Area Type gen_​text_​input

Create Set Rules For A Route Map in APIC External Routed Network

Summary
Create set rules for a route map in APIC external routed network.
Description
This task creates set rules for a route map in an external routed network on the APIC controller.
Inputs
Input Description Mappable To Type Mandatory
Tenant Name Select a tenant name.​ Apic​Device​Tenant​Identity Y
Action Rule Profile Name Enter the action rule profile name.​ gen_​text_​input Y
Description Enter the description.​ gen_​text_​input
Set Community Check to enable set community.​ Defaults to unchecked.​ Boolean
Set Route Tag Check to enable set route tag.​ Defaults to unchecked.​ Boolean
Set Dampening Check to enable set dampening.​ Defaults to unchecked.​ Boolean
Set Weight Check to enable set weight.​ Defaults to unchecked.​ Boolean
Set Next Hop Check to enable set next hop.​ Defaults to unchecked.​ Boolean
Set Preference Check to enable set preference.​ Defaults to unchecked.​ Boolean
Set Metric Check to enable set metric.​ Defaults to unchecked.​ Boolean
Set Metric Type Check to enable set metric type.​ Defaults to unchecked.​ Boolean
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​NAME Tenant Name on which the selected operation was performed gen_​text_​input
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
DEVICE_​TENANT_​ACTION_​RULE_​PROFILE_​NAME Action Rule Profile Name gen_​text_​input
DEVICE_​TENANT_​ACTION_​RULE_​PROFILE_​IDENTITY Action Rule Profile Identity Apic​Device​Tenant​Action​Rule​Profile​Identity

Delete APIC EIGRP Interface Profile

Summary
Delete an EIGRP interface profile.
Description
This task deletes a EIGRP interface profile on the APIC controller.
Inputs
Input Description Mappable To Type Mandatory
EIGRP Interface Profile Name Select EIGRP Interface Profile name to delete.​ Apic​Device​Tenant​Logical​EIGRPInterface​Profile​Identity Y
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​NAME Tenant Name on which the selected operation was performed gen_​text_​input
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
TENANT_​EXTERNAL_​ROUTED_​NETWORK_​IDENTITY External Routed Network Identity Apic​Device​Tenant​L3Out​Identity
OUTPUT_​TENANT_​LOGICAL_​NODE_​PROFILE_​IDENTITY Logical Node Profile Identity Apic​Device​Tenant​Logical​Node​Profile​Identity
OUTPUT_​TENANT_​LOGICAL_​INTERFACE_​PROFILE_​IDENTITY Logical Interface Profile Identity Apic​Device​Tenant​Logical​Interface​Profile​Identity
TENANT_​LOGICAL_​EIGRP_​INTERFACE_​PROFILE Tenant Logical EIGRP Interface Profile gen_​text_​input
DEVICE_​TENANT_​EIGRP_​INTERFACE_​IDENTITY Tenant Logical EIGRP Interface Profile Identity Apic​Device​Tenant​Logical​EIGRPInterface​Profile​Identity

Delete APIC Logical OSPF Interface Profile

Summary
Delete a logical OSPF interface profile.
Description
This task deletes a logical open shortest path first (OSPF) interface profile on the APIC controller.
Inputs
Input Description Mappable To Type Mandatory
OSPF Interface Profile Name Select OSPF Interface Profile name to delete.​ Apic​Device​Tenant​Logical​OSPFInterface​Profile​Identity Y
Do you want to delete the selected Logical OSPF Interface Profile? Y
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​NAME Tenant Name on which the selected operation was performed gen_​text_​input
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
TENANT_​EXTERNAL_​ROUTED_​NETWORK_​IDENTITY External Routed Network Identity Apic​Device​Tenant​L3Out​Identity
OUTPUT_​TENANT_​LOGICAL_​NODE_​PROFILE_​IDENTITY Logical Node Profile Identity Apic​Device​Tenant​Logical​Node​Profile​Identity
OUTPUT_​TENANT_​LOGICAL_​INTERFACE_​PROFILE_​IDENTITY Logical Interface Profile Identity Apic​Device​Tenant​Logical​Interface​Profile​Identity
TENANT_​LOGICAL_​OSPF_​INTERFACE_​PROFILE Tenant Logical OSPF Interface Profile gen_​text_​input
TENANT_​LOGICAL_​OSPF_​INTERFACE_​PROFILE_​IDENTITY Tenant Logical OSPF Interface Profile Identity Apic​Device​Tenant​Logical​OSPFInterface​Profile​Identity

Delete APIC Match Community Factor from Match Community Term

Summary
Delete APIC Match Community Factor from Match Community Term.
Description
This task deletes a match community factor from a match community term.
Inputs
Input Description Mappable To Type Mandatory
Match Community Factor Select a match community factor to be deleted.​ APICMatch​Community​Factor​Identity Y
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​NAME Tenant Name on which the selected operation was performed gen_​text_​input
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
OUTPUT_​TENANT_​MATCH_​RULE_​IDENTITY APIC Tenant's Match Rule Identity APIC Match Rule Identity
OUTPUT_​TENANT_​MATCH_​COMMUNITY_​TERM_​IDENTITY Match Community Term Identity APICMatch​Community​Term​Identity
OUTPUT_​TENANT_​MATCH_​COMMUNITY_​FACTOR_​IDENTITY Match Community Factor Identity APICMatch​Community​Factor​Identity

Delete APIC Match Community Term from Match Rule for Route Map

Summary
Delete APIC Match Community Term from Match Rule for Route Map.
Description
This task deletes a match community term from a match rule for a route map.
Inputs
Input Description Mappable To Type Mandatory
Match Community Term Select a match community term to be deleted.​ APICMatch​Community​Term​Identity Y
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​NAME Tenant Name on which the selected operation was performed gen_​text_​input
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
OUTPUT_​TENANT_​MATCH_​RULE_​IDENTITY APIC Tenant's Match Rule Identity APIC Match Rule Identity
OUTPUT_​TENANT_​MATCH_​COMMUNITY_​TERM_​IDENTITY Match Community Term Identity APICMatch​Community​Term​Identity

Delete APIC Match Prefix From Match Rule

Summary
Delete APIC Match Prefix From Match Rule.
Description
This task removes a match prefix from the match rules available in APIC EPG.
Inputs
Input Description Mappable To Type Mandatory
Match Prefix Select a Match Prefix to be deleted.​ MATCH_​PREFIX_​IDENTITY Y
Do you want to delete the selected Match Prefix? Do you want to delete the selected Match Prefix? Y
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​NAME Tenant Name on which the selected operation was performed gen_​text_​input
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
OUTPUT_​TENANT_​MATCH_​RULE_​IDENTITY APIC Tenant's Match Rule Identity APIC Match Rule Identity
OUTPUT_​TENANT_​MATCH_​RULE_​NAME APIC Tenant's Match Rule gen_​text_​input
OUTPUT_​MATCH_​PREFIX_​NAME APIC Match Prefix Name on which the selected operation was performed gen_​text_​input
OUTPUT_​MATCH_​PREFIX_​IDENTITY APIC Match Prefix Identity MATCH_​PREFIX_​IDENTITY

Delete APIC Match Rule for a Route Map

Summary
Delete APIC Match Rule for a Route Map.
Description
This task deletes an APIC match rule from a route map.
Inputs
Input Description Mappable To Type Mandatory
Match Rule Name Select match rule to delete.​ APIC Match Rule Identity Y
Do you want to delete the selected match rule? Y
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​NAME Tenant Name on which the selected operation was performed gen_​text_​input
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
OUTPUT_​TENANT_​MATCH_​RULE_​IDENTITY APIC Tenant's Match Rule Identity APIC Match Rule Identity
OUTPUT_​TENANT_​MATCH_​RULE_​NAME APIC Tenant's Match Rule gen_​text_​input

Delete APIC Next Hop Address From Static Route

Summary
Delete APIC Next Hop Address From Static Route.
Description
This task removes a next hop address from a static route.
Inputs
Input Description Mappable To Type Mandatory
Next HOP Address Select next HOP address to be deleted.​ APIC_​TENANT_​NEXT_​HOP_​IDENTITY Y
Do you want to delete the selected next HOP address from static route? Y
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
TENANT_​EXTERNAL_​ROUTED_​NETWORK_​IDENTITY External Routed Network Identity Apic​Device​Tenant​L3Out​Identity
OUTPUT_​TENANT_​LOGICAL_​NODE_​PROFILE_​IDENTITY Logical Node Profile Identity Apic​Device​Tenant​Logical​Node​Profile​Identity
OUTPUT_​TENANT_​LOGICAL_​NODE_​IDENTITY Logical Node Identity Apic​Device​Tenant​Logical​Node​Identity
OUTPUT_​TENANT_​STATIC_​ROUTE_​TO_​LOGICAL_​NODE_​IDENTITY Static Route To Logical Node Identity Apic​Device​Tenant​Static​Route​To​Logical​Node​Identity
OUTPUT_​TENANT_​NEXT_​HOP_​TO_​STATIC_​ROUTE_​IDENTITY Next HOP Address to Static Route Identity APIC_​TENANT_​NEXT_​HOP_​IDENTITY

Delete BGP Peer Connectivity From APIC Node Profile

Summary
Delete a BGP peer connection from a node profile.
Description
This task deletes a border gateway (BGP) peer connection from a node profile on the APIC controller.
Inputs
Input Description Mappable To Type Mandatory
BGP Peer Connectivity Name Select BGP Peer Connectivity name.​ Apic​Device​Tenant​BGPPeer​Connectivity​Profile​Identity Y
Do you want to delete the selected BGP Peer Connectivity Profile From Node Profile? Y
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​NAME Tenant Name on which the selected operation was performed gen_​text_​input
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
TENANT_​EXTERNAL_​ROUTED_​NETWORK_​NAME External Routed Network Name gen_​text_​input
TENANT_​EXTERNAL_​ROUTED_​NETWORK_​IDENTITY External Routed Network Identity Apic​Device​Tenant​L3Out​Identity
OUTPUT_​TENANT_​LOGICAL_​NODE_​PROFILE Logical Node Profile Name gen_​text_​input
OUTPUT_​TENANT_​LOGICAL_​NODE_​PROFILE_​IDENTITY Logical Node Profile Identity Apic​Device​Tenant​Logical​Node​Profile​Identity
OUTPUT_​TENANT_​BGP_​PEER_​CONNECTIVITY BGP Peer Connectivity Profile gen_​text_​input
OUTPUT_​TENANT_​BGP_​PEER_​CONNECTIVITY_​IDENTITY BGP Peer Connectivity Profile Identity Apic​Device​Tenant​BGPPeer​Connectivity​Profile​Identity

Delete External Network From APIC External Routed Network

Summary
Delete an external network from an external routed network.
Description
This task deletes an external network from an external routed network for a tenant on the APIC controller.
Inputs
Input Description Mappable To Type Mandatory
External Network Name Select an external network from an APIC External Routed Network.​ Apic​Tenant​External​Network​To​External​Routed​Network​Identity Y
Do you want to delete the selected External Network from External Routed Network? Do you want to delete the selected External Network from External Routed Network? Y
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​NAME Tenant Name on which the selected operation was performed gen_​text_​input
TENANT_​EXTERNAL_​ROUTED_​NETWORK_​NAME External Routed Network Name gen_​text_​input
TENANT_​EXTERNAL_​ROUTED_​NETWORK_​IDENTITY External Routed Network Identity Apic​Device​Tenant​L3Out​Identity
TENANT_​EXTERNAL_​NETWORK_​NAME External Network Name gen_​text_​input

Delete Logical Interface Profile from APIC Logical Node Profile

Summary
Description
Inputs
Input Description Mappable To Type Mandatory
Logical Interface Profile Name Select a Logical Interface Profile from an APIC Logical Node Profile.​ Apic​Device​Tenant​Logical​Interface​Profile​Identity Y
Do you want to delete the selected Logical Interface Profile From Logical Node Profile? Do you want to delete the selected Logical Interface Profile From Logical Node Profile? Y
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​NAME Tenant Name on which the selected operation was performed gen_​text_​input
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
TENANT_​EXTERNAL_​ROUTED_​NETWORK_​NAME External Routed Network Name gen_​text_​input
TENANT_​EXTERNAL_​ROUTED_​NETWORK_​IDENTITY External Routed Network Identity Apic​Device​Tenant​L3Out​Identity
OUTPUT_​TENANT_​LOGICAL_​NODE_​PROFILE Logical Node Profile Name gen_​text_​input
OUTPUT_​TENANT_​LOGICAL_​NODE_​PROFILE_​IDENTITY Logical Node Profile Identity Apic​Device​Tenant​Logical​Node​Profile​Identity
OUTPUT_​TENANT_​LOGICAL_​INTERFACE_​PROFILE_​NAME Logical Interface Profile Name gen_​text_​input
OUTPUT_​TENANT_​LOGICAL_​INTERFACE_​PROFILE_​IDENTITY Logical Interface Profile Identity Apic​Device​Tenant​Logical​Interface​Profile​Identity

Delete Logical Node From APIC Logical Node Profile of External Routed Network

Summary
Description
Inputs
Input Description Mappable To Type Mandatory
Node Select a node.​ Apic​Device​Tenant​Logical​Node​Identity Y
Do you want to delete the selected Logical Node From Node Profile? Y
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​NAME Tenant Name on which the selected operation was performed gen_​text_​input
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
TENANT_​EXTERNAL_​ROUTED_​NETWORK_​NAME External Routed Network Name gen_​text_​input
TENANT_​EXTERNAL_​ROUTED_​NETWORK_​IDENTITY External Routed Network Identity Apic​Device​Tenant​L3Out​Identity
OUTPUT_​TENANT_​LOGICAL_​NODE_​PROFILE Logical Node Profile Name gen_​text_​input
OUTPUT_​TENANT_​LOGICAL_​NODE_​PROFILE_​IDENTITY Logical Node Profile Identity Apic​Device​Tenant​Logical​Node​Profile​Identity
OUTPUT_​TENANT_​LOGICAL_​NODE_​IDENTITY Logical Node Identity Apic​Device​Tenant​Logical​Node​Identity

Delete Logical Node Profile From APIC External Routed Network

Summary
Delete a logical node profile from an external routed network.
Description
This task deletes a logical node profile from an external routed network on the APIC controller.
Inputs
Input Description Mappable To Type Mandatory
Logical Node Profile Name Select Logical Node profile From an APIC External Routed Network.​ Apic​Device​Tenant​Logical​Node​Profile​Identity Y
Do you want to delete the selected Logical Node Profile From External Routed Network? Do you want to delete the selected Logical Node Profile From External Routed Network? Y
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​NAME Tenant Name on which the selected operation was performed gen_​text_​input
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
TENANT_​EXTERNAL_​ROUTED_​NETWORK_​NAME External Routed Network Name gen_​text_​input
TENANT_​EXTERNAL_​ROUTED_​NETWORK_​IDENTITY External Routed Network Identity Apic​Device​Tenant​L3Out​Identity
OUTPUT_​TENANT_​LOGICAL_​NODE_​PROFILE Logical Node Profile Name gen_​text_​input
OUTPUT_​TENANT_​LOGICAL_​NODE_​PROFILE_​IDENTITY Logical Node Profile Identity Apic​Device​Tenant​Logical​Node​Profile​Identity

Delete Route Map or Profile from APIC External Routed Network

Summary
Delete route map/profile from APIC external routed network.
Description
This task deletes a route map or profile from an external routed network from a tenant on the APIC controller.
Inputs
Input Description Mappable To Type Mandatory
Route Control Profile Name Select a Route Control Profile name.​ Apic​Device​Tenant​Routed​Profile​To​Ext​Routed​Network​Identity Y
Do you want to delete the selected Routed Control Profile From External Routed Network? Y
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​NAME Tenant Name on which the selected operation was performed gen_​text_​input
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
TENANT_​EXTERNAL_​ROUTED_​NETWORK_​NAME External Routed Network Name gen_​text_​input
TENANT_​EXTERNAL_​ROUTED_​NETWORK_​IDENTITY External Routed Network Identity Apic​Device​Tenant​L3Out​Identity
TENANT_​ROUTED_​PROFILE_​NAME Routed Profile Name gen_​text_​input
TENANT_​ROUTED_​PROFILE_​IDENTITY Routed Profile Name Identity Apic​Device​Tenant​Routed​Profile​To​Ext​Routed​Network​Identity

Delete Routed Interface from Logical Interface Profile

Summary
Delete routed interface from logical interface profile.
Description
This task deletes a routed interface from a logical interface profile on the APIC controller.
Inputs
Input Description Mappable To Type Mandatory
Interface Name Select Interface From an APIC Logical Interface profile.​ Apic​Device​Interface​To​Logical​Interface​Profile​Identity Y
Do you want to delete the selected Interface To Logical Interface Profile? Do you want to delete the selected Interface To Logical Interface Profile? Y
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​NAME Tenant Name on which the selected operation was performed gen_​text_​input
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
TENANT_​EXTERNAL_​ROUTED_​NETWORK_​IDENTITY External Routed Network Identity Apic​Device​Tenant​L3Out​Identity
OUTPUT_​TENANT_​LOGICAL_​NODE_​PROFILE_​IDENTITY Logical Node Profile Identity Apic​Device​Tenant​Logical​Node​Profile​Identity
OUTPUT_​TENANT_​LOGICAL_​INTERFACE_​PROFILE_​IDENTITY Logical Interface Profile Identity Apic​Device​Tenant​Logical​Interface​Profile​Identity
FABRIC_​PHYSICAL_​INTERFACE_​IDENTITY APIC Physical Interface Identity Apic​Fabric​Physical​Interface​Identity

Delete Routed Outside in APIC

Summary
Delete routed outside in APIC.
Description
This task deletes routed outside for a tenant on the APIC controller.
Inputs
Input Description Mappable To Type Mandatory
External Routed Network Name Select any one of the External Routed Networks to delete.​ Apic​Device​Tenant​L3Out​Identity Y
Do you want to delete the selected External Routed Network? Y
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​NAME Tenant Name on which the selected operation was performed gen_​text_​input
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
TENANT_​EXTERNAL_​ROUTED_​NETWORK_​NAME External Routed Network Name gen_​text_​input
TENANT_​EXTERNAL_​ROUTED_​NETWORK_​IDENTITY External Routed Network Identity Apic​Device​Tenant​L3Out​Identity

Delete Set Rules For a Route Map from APIC External Routed Network

Summary
Delete set rules for a route map from APIC external routed network.
Description
This task deletes set rules for a route map from an external routed network on the APIC controller.
Inputs
Input Description Mappable To Type Mandatory
Action Rule Profile Name Select an action rule profile name to be deleted.​ Apic​Device​Tenant​Action​Rule​Profile​Identity Y
Do you want to delete the selected Tenant Action Rule Profile? Y
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​NAME Tenant Name on which the selected operation was performed gen_​text_​input
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
DEVICE_​TENANT_​ACTION_​RULE_​PROFILE_​NAME Action Rule Profile Name gen_​text_​input
DEVICE_​TENANT_​ACTION_​RULE_​PROFILE_​IDENTITY Action Rule Profile Identity Apic​Device​Tenant​Action​Rule​Profile​Identity

Delete Static Route From APIC Logical Node

Summary
Delete a static route from a logical node.
Description
This task deletes a static route from a logical node.
Inputs
Input Description Mappable To Type Mandatory
Static Route Select Static Route to delete.​ Apic​Device​Tenant​Static​Route​To​Logical​Node​Identity Y
Do you want to delete the selected Static Route from Logical Node? Y
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​NAME Tenant Name on which the selected operation was performed gen_​text_​input
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
TENANT_​EXTERNAL_​ROUTED_​NETWORK_​NAME External Routed Network Name gen_​text_​input
TENANT_​EXTERNAL_​ROUTED_​NETWORK_​IDENTITY External Routed Network Identity Apic​Device​Tenant​L3Out​Identity
OUTPUT_​TENANT_​LOGICAL_​NODE_​PROFILE Logical Node Profile Name gen_​text_​input
OUTPUT_​TENANT_​LOGICAL_​NODE_​PROFILE_​IDENTITY Logical Node Profile Identity Apic​Device​Tenant​Logical​Node​Profile​Identity
OUTPUT_​TENANT_​STATIC_​ROUTE_​TO_​LOGICAL_​NODE_​IDENTITY Static Route To Logical Node Identity Apic​Device​Tenant​Static​Route​To​Logical​Node​Identity
OUTPUT_​TENANT_​LOGICAL_​NODE_​IDENTITY Logical Node Identity Apic​Device​Tenant​Logical​Node​Identity

Delete Subnet From APIC External Network

Summary
Delete a subnet from an external network.
Description
This task deletes a subnet from an external network for a tenant on the APIC controller.
Inputs
Input Description Mappable To Type Mandatory
Subnet Address Select a Subnet Address to delete.​ Apic​Tenant​Subnet​To​External​Network​Identity Y
Do you want to delete the selected Subnet From External Network? Y
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​NAME Tenant Name on which the selected operation was performed gen_​text_​input
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
TENANT_​EXTERNAL_​ROUTED_​NETWORK_​NAME External Routed Network Name gen_​text_​input
TENANT_​EXTERNAL_​ROUTED_​NETWORK_​IDENTITY External Routed Network Identity Apic​Device​Tenant​L3Out​Identity
TENANT_​EXTERNAL_​NETWORK_​NAME External Network Name gen_​text_​input
TENANT_​EXTERNAL_​NETWORK_​IDENTITY External Network Identity Apic​Device​External​Network​Identity
TENANT_​EXTERNAL_​NETWORK_​SUBNET_​ADDRESS Subnet Address for External Network gen_​text_​input

Disassociate Match Rules from Route Control Context in APIC External Routed Network

Summary
Disassociate Match Rules from Route Control Context in APIC External Routed Network.
Description
This task dissociates match rules from a route control context in an APIC external routed network on the APIC controller.
Inputs
Input Description Mappable To Type Mandatory
Match Rule Name Select a match rule name to be disassociated.​ APIC_​TENANT_​ASSOCIATE_​MATCHED_​RULES_​TO_​ERN_​ROUTE_​PROFILE_​CONTEXT_​IDENTITY Y
Do you want to disassociate the selected match rule name? Y
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​NAME Tenant Name on which the selected operation was performed gen_​text_​input
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
TENANT_​EXTERNAL_​ROUTED_​NETWORK_​IDENTITY External Routed Network Identity Apic​Device​Tenant​L3Out​Identity
TENANT_​ROUTED_​PROFILE_​IDENTITY Routed Profile Name Identity Apic​Device​Tenant​Routed​Profile​To​Ext​Routed​Network​Identity
TENANT_​EXTERNAL_​NETWORK_​CONTEXT_​IDENTITY Context Identity Apic​Tenant​Context​To​Route​Profile​Identity
OUTPUT_​TENANT_​MATCHED_​RULES_​TO_​ERN_​ROUTE_​PROFILE_​CONTEXT_​IDENTITY APIC Matched Rules To ERN Route Profile Context Identity APIC_​TENANT_​ASSOCIATE_​MATCHED_​RULES_​TO_​ERN_​ROUTE_​PROFILE_​CONTEXT_​IDENTITY

Remove APIC Route Control Profile from External Network

Summary
Remove APIC Route Control Profile from External Network.
Description
This task removes a route control profile from an external network.
Inputs
Input Description Mappable To Type Mandatory
Route Control Profile Name Select route control profile name.​ APIC_​DEVICE_​TENANT_​ROUTE_​CONTROL_​PROFILE_​TO_​EXTERNAL_​NETWORK_​IDENTITY Y
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​NAME Tenant Name on which the selected operation was performed gen_​text_​input
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
TENANT_​EXTERNAL_​ROUTED_​NETWORK_​NAME External Routed Network Name gen_​text_​input
TENANT_​EXTERNAL_​ROUTED_​NETWORK_​IDENTITY External Routed Network Identity Apic​Device​Tenant​L3Out​Identity
TENANT_​EXTERNAL_​NETWORK_​NAME External Network Name gen_​text_​input
TENANT_​EXTERNAL_​NETWORK_​IDENTITY External Network Identity Apic​Device​External​Network​Identity
OUTPUT_​TENANT_​ROUTE_​CONTROL_​PROFILE_​NAME Route Control Profile Name gen_​text_​input
OUTPUT_​TENANT_​ROUTE_​CONTROL_​PROFILE_​DIRECTION Route Control Profile Direction APICRoute​Control​Profile​Direction​LOVType​Identity
OUTPUT_​TENANT_​ROUTE_​CONTROL_​PROFILE_​TO_​EXTERNAL_​NETWORK_​IDENTITY Route Control Profile to External Network Identity APIC_​DEVICE_​TENANT_​ROUTE_​CONTROL_​PROFILE_​TO_​EXTERNAL_​NETWORK_​IDENTITY

Remove APIC Route Control Profile from Subnet

Summary
Remove APIC Route Control Profile from Subnet.
Description
This task removes a route control profile from a subnet.
Inputs
Input Description Mappable To Type Mandatory
Route Control Profile Name Select route control profile name.​ APIC_​DEVICE_​TENANT_​ROUTE_​CONTROL_​PROFILE_​IDENTITY Y
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​NAME Tenant Name on which the selected operation was performed gen_​text_​input
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
TENANT_​EXTERNAL_​ROUTED_​NETWORK_​NAME External Routed Network Name gen_​text_​input
TENANT_​EXTERNAL_​ROUTED_​NETWORK_​IDENTITY External Routed Network Identity Apic​Device​Tenant​L3Out​Identity
TENANT_​EXTERNAL_​NETWORK_​NAME External Network Name gen_​text_​input
TENANT_​EXTERNAL_​NETWORK_​IDENTITY External Network Identity Apic​Device​External​Network​Identity
TENANT_​EXTERNAL_​NETWORK_​SUBNET_​ADDRESS Subnet Address for External Network gen_​text_​input
OUTPUT_​TENANT_​ROUTE_​CONTROL_​PROFILE_​NAME Route Control Profile Name gen_​text_​input
OUTPUT_​TENANT_​ROUTE_​CONTROL_​PROFILE_​DIRECTION Route Control Profile Direction APICRoute​Control​Profile​Direction​LOVType​Identity
OUTPUT_​TENANT_​ROUTE_​CONTROL_​PROFILE_​IDENTITY Route Control Profile Identity APIC_​DEVICE_​TENANT_​ROUTE_​CONTROL_​PROFILE_​IDENTITY

Remove AS Number from Set AS Path - Prepend AS

Summary
Remove AS Number from Set AS Path - Prepend AS.
Description
This task removes AS Number from Set AS Path - Prepend AS in Set Rules for Route Map on the APIC controller.
Inputs
Input Description Mappable To Type Mandatory
AS Number Select an AS number to be deleted from set as path.​ APIC Tenant AS Number to Set AS Path Identity Y
Do you want to remove SA Number from the selected set as path? Y
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
DEVICE_​TENANT_​ACTION_​RULE_​PROFILE_​IDENTITY Action Rule Profile Identity Apic​Device​Tenant​Action​Rule​Profile​Identity
OUTPUT_​TENANT_​SET_​AS_​PATH_​SET_​RULE_​PROFILE_​IDENTITY APIC Tenant Set As Path to Set Profile identity APIC_​TENANT_​SET_​AS_​PATH_​SET_​PROFILE_​TERM_​IDENTITY
OUTPUT_​TENANT_​AS_​NUMBER_​TO_​SET_​AS_​PATH_​IDENTITY APIC Tenant AS Number to Set AS Path Identity APIC Tenant AS Number to Set AS Path Identity

Remove Additional communities from Set Rules

Summary
Remove Additional communities from Set Rules.
Description
This task removes additional communities from set rules on the APIC controller.
Inputs
Input Description Mappable To Type Mandatory
Select Additonal Community Select an additional cmmunity name to be deleted.​ APIC_​TENANT_​ADDITIONAL_​COMMUNITY_​SET_​PROFILE_​TERM_​IDENTITY Y
Do you want to delete the selected additional community from Set Rule? Do you want to delete the selected Additional Community from Set Rule? Y
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​NAME Tenant Name on which the selected operation was performed gen_​text_​input
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
DEVICE_​TENANT_​ACTION_​RULE_​PROFILE_​NAME Action Rule Profile Name gen_​text_​input
DEVICE_​TENANT_​ACTION_​RULE_​PROFILE_​IDENTITY Action Rule Profile Identity Apic​Device​Tenant​Action​Rule​Profile​Identity
OUTPUT_​TENANT_​MATCH_​REGEX_​COMMUNITY_​TERM_​IDENTITY APIC Tenant Additional Community to Set Profile identity APIC_​TENANT_​ADDITIONAL_​COMMUNITY_​SET_​PROFILE_​TERM_​IDENTITY

Remove Context from Routed Maps or Profiles in APIC External Routed Network

Summary
Remove context from routed maps/profiles in APIC external routed network.
Description
This task removes a context from routed maps and profiles in an external routed network on the APIC controller.
Inputs
Input Description Mappable To Type Mandatory
Context Name Select a Context.​ Apic​Tenant​Context​To​Route​Profile​Identity Y
Do you want to delete the selected Context From Routed Profile? Do you want to delete the selected Context From Routed Profile? Y
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​NAME Tenant Name on which the selected operation was performed gen_​text_​input
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
TENANT_​EXTERNAL_​ROUTED_​NETWORK_​NAME External Routed Network Name gen_​text_​input
TENANT_​EXTERNAL_​ROUTED_​NETWORK_​IDENTITY External Routed Network Identity Apic​Device​Tenant​L3Out​Identity
TENANT_​ROUTED_​PROFILE_​NAME Routed Profile Name gen_​text_​input
TENANT_​ROUTED_​PROFILE_​IDENTITY Routed Profile Name Identity Apic​Device​Tenant​Routed​Profile​To​Ext​Routed​Network​Identity
TENANT_​EXTERNAL_​NETWORK_​CONTEXT_​NAME Context Name gen_​text_​input
TENANT_​EXTERNAL_​NETWORK_​CONTEXT_​IDENTITY Context Identity Apic​Tenant​Context​To​Route​Profile​Identity

Remove Match Regex Community Term From Match Rule

Summary
Remove Match Regex Community Term From Match Rule.
Description
This task removes a match regex community term from a match rule under external routed networks on the APIC controller.
Inputs
Input Description Mappable To Type Mandatory
Match Regex Community Term Select match regex community term to delete.​ APIC Match Regex Community Term Identity Y
Do you want to delete the selected regex community term rule? Y
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​NAME Tenant Name on which the selected operation was performed gen_​text_​input
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
OUTPUT_​TENANT_​MATCH_​RULE_​IDENTITY APIC Tenant's Match Rule Identity APIC Match Rule Identity
OUTPUT_​TENANT_​MATCH_​REGEX_​COMMUNITY_​TERM_​NAME Match Regex Community Term Name gen_​text_​input
OUTPUT_​TENANT_​MATCH_​REGEX_​COMMUNITY_​TERM_​IDENTITY Match Regex Community Term Identity APIC Match Regex Community Term Identity

Remove Set AS Path from Set Rules

Summary
Remove Set AS Path from Set Rules.
Description
This task removes Set AS Path from the set rules on the APIC controller.
Inputs
Input Description Mappable To Type Mandatory
Set AS Path Select an set as path criteria to be deleted.​ APIC_​TENANT_​SET_​AS_​PATH_​SET_​PROFILE_​TERM_​IDENTITY Y
Do you want to delete the selected set as path from Set Rule? Do you want to delete the selected set as path from Set Rule? Y
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
DEVICE_​TENANT_​ACTION_​RULE_​PROFILE_​IDENTITY Action Rule Profile Identity Apic​Device​Tenant​Action​Rule​Profile​Identity
OUTPUT_​TENANT_​SET_​AS_​PATH_​SET_​RULE_​PROFILE_​IDENTITY APIC Tenant Set As Path to Set Profile identity APIC_​TENANT_​SET_​AS_​PATH_​SET_​PROFILE_​TERM_​IDENTITY

Update Match Regex Community Term From Match Rule

Summary
Update Match Regex Community Term To Match Rule.
Description
This task updates a match regex community term to a match rule under external routed networks on the APIC controller.
Inputs
Input Description Mappable To Type Mandatory
Match Regex Community Term Select match regex community term to Update.​ APIC Match Regex Community Term Identity Y
Match Regex Community Name Enter a unique name for the match regex community name.​ gen_​text_​input Y
Regular Expression Enter regular expression.​ gen_​text_​input
Community Type Select community type.​ Default community type is regular
Description Enter a short description for the match regex community term.​ The description can be up to 128 alphanumeric characters.​ gen_​text_​input
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​NAME Tenant Name on which the selected operation was performed gen_​text_​input
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
OUTPUT_​TENANT_​MATCH_​RULE_​IDENTITY APIC Tenant's Match Rule Identity APIC Match Rule Identity
OUTPUT_​TENANT_​MATCH_​REGEX_​COMMUNITY_​TERM_​NAME Match Regex Community Term Name gen_​text_​input
OUTPUT_​TENANT_​MATCH_​REGEX_​COMMUNITY_​TERM_​IDENTITY Match Regex Community Term Identity APIC Match Regex Community Term Identity

Update Set Rule For a Route Map in APIC External Routed Network

Summary
Update set rule for a route map in APIC external routed network.
Description
This task updates set rules on a route map in an external routed network on the APIC controller.
Inputs
Input Description Mappable To Type Mandatory
Action Rule Profile Name Select an action rule profile name.​ Apic​Device​Tenant​Action​Rule​Profile​Identity Y
Description Enter the description.​ gen_​text_​input
Set Community Check to enable set community.​ Boolean
Set Route Tag Check to enable set route tag.​ Boolean
Set Dampening Check to enable set dampening.​ Boolean
Set Weight Check to enable set weight.​ Boolean
Set Next Hop Check to enable set next hop.​ Boolean
Set Preference Check to enable set preference.​ Boolean
Set Metric Check to enable set metric.​ Boolean
Set Metric Type Check to enable set metric type.​ Boolean
Outputs
Output Description Type
APIC_​ACCOUNT APIC Account on which the selected operation was performed Apic​Device​Identity
TENANT_​NAME Tenant Name on which the selected operation was performed gen_​text_​input
TENANT_​IDENTITY APIC Tenant Identity Apic​Device​Tenant​Identity
DEVICE_​TENANT_​ACTION_​RULE_​PROFILE_​NAME Action Rule Profile Name gen_​text_​input
DEVICE_​TENANT_​ACTION_​RULE_​PROFILE_​IDENTITY Action Rule Profile Identity Apic​Device​Tenant​Action​Rule​Profile​Identity