EMC Unity - Create iSCSI Route
- Summary
- Create a new iSCSI route on an EMC Unity array.
- Description
-
This task creates an iSCSI Route on an EMC Unity storage array. iSCSI route is created on iSCSI Portal.
Prefix length in case of IPv6, should be in range 1 to 128. Gateway input is not required for IPv6 destination.
Input Format:
- EMC Unity Account Name: podName@AccountName. For example: Vblock@Unity_Hybrid
- EMC Unity iSCSI Portal: podName@AccountName@ipPortId@ipPortName@iqn@ipId@ipAdddress@iscsiID. For example: Default Pod@Unity-136@SP A@spa@SP A I/O Module 0 Ethernet Port 0@iqn.1992-04.com.emc:cx.apm00164209556.a4@spa_iom_0_eth0@10.28.107.146@if_7
- Destination: Valid IPv4 or IPv6 Address. Route Target node IP Address
- Subnet Mask or Prefix Length: Valid IPv4 Address for IPv4 Address or a valid prefix Length for IPv6 Address.
- Gateway: Valid IPv4 Address
- Inputs
-
Input Description Mappable To Type Mandatory EMC Unity Account Select EMC Unity Account to create iSCSI Route EMCUnityAccountIdentity Y EMC Unity iSCSI Portal Choose an EMC Unity iSCSI portal on which to create a route EMCUnityIscsiPortalIdentity Y Destination Enter an IP address for the target node of the route in IPv4 or IPv6 format gen_text_input Y Subnet Mask/Prefix Length Enter the subnet mask if IPv4, or prefix length in the range 1 to 128 if IPv6, for the network address gen_text_input Y Gateway Enter the IP address of the gateway associated with the route gen_text_input - Outputs
-
Output Description Type OUTPUT_EMC_UNITY_ACCOUNT_IDENTITY EMC Unity Account Identity. EMCUnityAccountIdentity OUTPUT_EMC_UNITY_ISCSI_ROUTE_IDENTITY EMC Unity iSCSI Route Identity EMCUnityIscsiRouteIdentity OUTPUT_EMC_UNITY_ISCSI_PORTAL_IDENTITY EMC Unity iSCSI Portal Identity EMCUnityIscsiPortalIdentity
Feedback