Cisco APIC Layer 3 Networking Configuration Guide, Release 6.2(x)

PDF

Cisco APIC Layer 3 Networking Configuration Guide, Release 6.2(x)

Display MPLS statistics

Updated: April 17, 2026

Want to summarize with AI?

Log in

Lists the MPLS-specific statistics that you can display at the interface and VRF levels in the system.

These are the MPLS-specific statistics that you can choose to display in the statistics screens described in this topic:

To display statistics information for all the interfaces and VRFs in your system, navigate to:

Tenant > infra > Networking > SR-MPLS Infra L3Outs

The SR-MPLS Infra L3Outs panel is displayed, showing all of the SR-MPLS infra L3Outs configured on your system. Remaining at the upper-level SR-MPLS Infra L3Outs panel, navigate to the appropriate statistics page, depending on the type of statistics that you want to display:

  • Click the Interface Stats tab to display a summary of the statistics for all of the MPLS interfaces on your system. Each row in this window displays MPLS statistics information for a specific interface on a specific node.

    Note

    The interface statistics shown in the main SR-MPLS infra L3Outs page are for all the SR-MPLS-enabled interfaces only on border leaf switch models with "FX2" or "GX" at the end of the switch name.

    To see other levels of MPLS interface statistics information, see Display SR-MPLS statistics for interfaces.

  • Click the VRF Stats tab to display a summary of the statistics for all of the MPLS VRFs on your system. Each row in this window displays MPLS statistics information for a specific VRF configured on a specific node.

    The VRF statistics provided in the SR-MPLS infra L3Out properties page are the individual VRF statistics on the given border leaf switch or remote leaf switch where the provider label of the SR-MPLS infra L3Out is consumed.

    To see other levels of MPLS VRF statistics information, see Display SR-MPLS statistics for VRFs.

Display SR-MPLS statistics for interfaces

This reference provides information about MPLS-specific interface statistics available for display and describes how to access these statistics through different navigation paths in the system.

MPLS-specific interface statistics

These are the MPLS-specific interface statistics that you can choose to display in the statistics screens:

  • MPLS Egress Drop Bytes

  • MPLS Egress Admit Bytes

  • MPLS Egress Drop Packets

  • MPLS Egress Admit Packets

  • MPLS Ingress Drop Bytes

  • MPLS Ingress Admit Bytes

  • MPLS Ingress Drop Packets

  • MPLS Ingress Admit Packets

To change the type of statistics that are shown on a statistics page, click the checkbox to bring up the Select Stats window, then move entries from the left column to the right column to show different statistics, and from the right column to the left column to remove certain statistics from view.

To change the layout of the statistics in this page to show statistics in a table format, click the icon with three horizontal bars and select Table View.

Navigation paths for statistics display

  • To display detailed aggregate interface statistics for all of the interfaces in the SR-MPLS VRF L3Outs under an SR-MPLS infra L3Out, navigate to that SR-MPLS infra L3Out:

    Tenant > infra > Networking > SR-MPLS Infra L3Outs > SR-MPLS_infra_L3Out_name

    Click the Stats tab to display detailed aggregate interface statistics for all of the interfaces in the SR-MPLS VRF L3Outs under that particular SR-MPLS infra L3Out.

  • To display statistics for a specific interface on a specific leaf switch, navigate to that interfaces area on the leaf switch:

    Fabric > Inventory > Pod # > leaf_switch > Interfaces, then click either Routed Interfaces or Encapsulated Routed Interfaces.

    Click on the specific interface that you want statistic information for, then click the Stats tab.

Display SR-MPLS statistics for VRFs

This topic describes the MPLS-specific VRF statistics that you can choose to display in the statistics screens and provides procedures for accessing detailed VRF statistics for specific VRFs and leaf switches.

These are the MPLS-specific VRF statistics that you can choose to display in the statistics screens described in this topic:

  • MPLS VRF Egress Drop Bytes

  • MPLS VRF Egress Admit Bytes

  • MPLS VRF Egress Drop Packets

  • MPLS VRF Egress Admit Packets

  • MPLS VRF Ingress Drop Bytes

  • MPLS VRF Ingress Admit Bytes

  • MPLS VRF Ingress Drop Packets

  • MPLS VRF Ingress Admit Packets

To change the type of statistics that are shown on a statistics page, click the checkbox to bring up the Select Stats window, then move entries from the left column to the right column to show different statistics, and from the right column to the left column to remove certain statistics from view.

To change the layout of the statistics in this page to show statistics in a table format, click the icon with three horizontal bars and select Table View.

  • To display detailed aggregate VRF statistics for a specific VRF, navigate to that VRF:

    Tenant > tenant_name > Networking > VRFs > VRF_name

    Click the Stats tab to display the aggregate VRF statistics for this particular VRF. Note that this VRF is being used by one of the SR-MPLS L3Outs, and this SR-MPLS L3Out might have multiple leaf switches, with multiple interfaces for each leaf switch. The statistics shown in this window is an aggregate of all the interfaces in this SR-MPLS L3Out that is being used by this VRF.

  • To display VRF statistics for a specific leaf switch, navigate to the VRF contexts for that leaf switch:

    Fabric > Inventory > Pod # > leaf_switch > VRF Contexts > VRF_context_name

    Click the Stats tab to display the statistics for this VRF for this specific leaf switch.