Cisco APIC Layer 3 Networking Configuration Guide, Release 6.2(x)

Configure a VXLAN site ID

Updated: April 17, 2026

Want to summarize with AI?

Assign the unique VXLAN site ID required to configure a border gateway set policy.

Use this procedure to configure a VXLAN site ID in Cisco APIC Release 6.1(2) or later.

Beginning with Cisco APIC Release 6.1(2), you must configure a VXLAN site ID before you configure a border gateway set policy.

Note

If you configured the ACI border gateway feature in Cisco APIC Release 6.1(1) and upgrade to Cisco APIC Release 6.1(2) without creating a VXLAN site ID, Cisco APIC generates a fault for all stretched VRFs and bridge domains.

Procedure

	1.	From the top menu bar, choose Tenants > infra > Policies > VXLAN Gateway > VXLAN Site.
	2.	Right-click VXLAN Site and choose Create VXLAN Site. The Create VXLAN Site window appears.
	3.	In the Name field, enter a name for the VXLAN site.
	4.	In the ID field, enter a unique ID for the VXLAN site.
	5.	Optional: In the Description field, enter a description of the VXLAN site.
	6.	Click Submit.

The VXLAN site is created with the specified ID. You can now configure the border gateway set policy.

Need help?

Open a support case

(Requires a Cisco Service Contract)

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.