Cisco APIC Layer 3 Networking Configuration Guide, Release 6.2(x)

Cisco ACI GOLF

Updated: April 17, 2026

Explains Cisco ACI GOLF architecture, configuration, guidelines, and troubleshooting for scalable fabric-to-WAN connectivity using BGP EVPN over OSPF, including Multi-Site integration and EVPN Type-2 host-route distribution.

Cisco ACI GOLF

Explains how GOLF provides WAN connectivity for ACI fabrics by carrying BGP EVPN over OSPF and aggregating tenant BGP sessions toward a DCIG.

BGP EVPN type-2 host route distribution

Explains how fabric spine switches advertise BGP EVPN type-2 MAC-IP host routes to a DCIG to improve traffic-forwarding efficiency in Multi-Pod deployments.

Distribute BGP EVPN type-2 host routes to a DCIG by using the GUI

Distributes BGP EVPN type-2 host routes to a DCIG by enabling host-route leaking in a BGP address family context policy and assigning the policy to a tenant VRF.

Troubleshoot EVPN type-2 route distribution to a DCIG

Troubleshoots EVPN type-2 route distribution to a DCIG by verifying the host-leak configuration, spine route advertisements, and route import into the destination VRF.

GOLF

Need help?

Open a support case

(Requires a Cisco Service Contract)

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.