Cisco APIC Layer 3 Networking Configuration Guide, Release 6.2(x)

PDF

Cisco APIC Layer 3 Networking Configuration Guide, Release 6.2(x)

Route control

Want to summarize with AI?

Log in

Explains how subnet scope and aggregation options control route advertisement, route sharing between VRFs, and contract enforcement for external subnets.


Route control determines how the ACI fabric imports, exports, aggregates, and shares routes between VRFs and external networks.

Route control components and configuration

These subnet scope options control route advertisement and contract enforcement:

  • Export Route Control Subnet advertises the subnet from the ACI fabric to an external network.

  • Import Route Control Subnet permits the subnet to be imported into the ACI fabric when import route control enforcement is enabled. BGP and OSPF support this option.

  • External Subnets for the External EPG identifies the external subnet to which contracts for the external EPG apply.

  • Shared Route Control Subnet permits a route learned through a shared L3Out to be advertised to another VRF.

  • Shared Security Import Subnet applies shared contract security to an imported subnet.

These aggregation options control how routes are summarized:

  • Aggregate Export applies export route-control policies to all transit routes in a VRF.

  • Aggregate Import applies import route-control policies to all routes received from the specified Layer 3 peers.

  • Aggregate Shared Routes applies shared route-control policies to routes shared between VRFs.

Figure 1. Route community matching

Diagram showing route community matching