Configures a static route on a bridge domain by defining an endpoint behind an EPG subnet within the GUI. This process ensures proper traffic routing for pervasive bridge domains.
-
When creating the subnet for the static route, it is configured under the EPG (fvSubnet object under fvAEPg), associated with the pervasive BD (fvBD), not the BD itself.
-
The subnet mask must be /32 (/128 for IPv6) pointing to one IP address or one endpoint. It is contained in the EPG associated with the pervasive BD.
Before you begin
Create the tenant, VRF, BD, and EPG.
Procedure
-
On the menu bar, click .
-
In the Navigation pane, expand Application Profiles and click the application profile name.
-
Click Application EPGs and expand the EPG for the static route.
-
Expand Subnets , right-click the subnet for the static route, and choose Create Endpoints Behind EPG Subnet .
-
Enter the NextHop IP Address for the endpoint and click Update .
-
Click Submit .