- Trademarks
- New and Changed Information
- Cisco ACI Forwarding
- Prerequisites for Configuring Layer 3 Networks
- Routed Connectivity to External Networks
- Layer 3 Routed and Sub-Interface Port Channels
- QoS for L3Outs
- Routing Protocol Support
- Route Summarization
- Route Control
- Common Pervasive Gateway
- Static Route on a Bridge Domain
- MP-BGP Route Reflectors
- Switch Virtual Interface
- Shared Services
- Interleak Redistribution for MP-BGP
- Dataplane IP Learning per VRF
- IP Aging
- IPv6 Neighbor Discovery
- Tenant Routed Multicast
- IP SLAs
- Microsoft NLB
- IGMP Snooping
- MLD Snooping
- HSRP
- Cisco ACI GOLF
- Multi-Pod
- Remote Leaf Switches
- Transit Routing
Cisco APIC Layer 3 Networking Configuration Guide, Release 4.1(x)
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
- Updated:
- March 28, 2019
Feedback