Cisco APIC Layer 3 Networking Configuration Guide, Release 6.2(x)

PDF

Cisco APIC Layer 3 Networking Configuration Guide, Release 6.2(x)

Configure a Route Map for Interleak Redistribution Using the GUI

Updated: April 17, 2026

Want to summarize with AI?

Log in

Creates a tenant Route Control Profile policy that filters routes or sets attributes when eligible L3Out routes are redistributed into MP-BGP.

Before you begin

Configure the tenant.

Create the Route Control Profile policy under the protocol policies for the tenant.

Procedure

  1. On the menu bar, choose Tenants.

  2. In the work pane, double-click the tenant-name tenant.

  3. In the navigation pane, expand tenant-name > Policies > Protocol > Route Maps for Route Control.

  4. Right-click Route Maps for Route Control, and choose Create Route Maps for Route Control.

    The Create Route Maps for Route Control dialog box opens.

  5. In the Name field, enter a name for the Route Control Profile policy.

  6. In the Contexts area, click the + icon.

    The Create Route Control Context dialog box opens.

  7. Configure the route control context:

    1. In the Order and Name fields, enter the sequence number and context name.
    2. From the Action drop-down list, choose Permit.
    3. Optional: From the Match Rule drop-down list, choose an existing match rule or create a match rule.
    4. Optional: From the Set Rule drop-down list, choose an existing set rule or create a set rule.
    5. Click OK.

    Repeat this step for each route control context that the policy requires.

  8. In the Create Route Maps for Route Control dialog box, click Submit.

The Route Control Profile policy is created and available for interleak redistribution into MP-BGP.