Creates an SR-MPLS TTL Policy using the GUI to allow user-defined TTL values for SR-MPLS header configuration. This enables flexible policy management and association with SR-MPLS L3Out Node Profiles.
-
Add a new GUI policy object to configure SR-MPLS MPLS header TTL (previously hardcoded to 32 ).
-
Allow creating/editing an SR-MPLS TTL Policy with a user-defined TTL value.
-
Allow associating that TTL policy under the SR-MPLS L3Out Node Profile (GUI shows the section only when applicable).
Before you begin
-
Review the SR-MPLS guidelines and limitations provided in Guidelines and limitations for SR-MPLS.
-
Configure an MPLS custom QoS policy using the procedures provided in SR-MPLS custom QoS policies.
Procedure
| 1. | Navigate to Tenants > infra > Policies > Protocol > SR-MPLS TTL Policy |
|
| 2. | Select Create Policy . |
|
| 3. | In the Name field, enter a unique name for the policy. |
|
| 4. | In the Description field, enter a description of the policy.[Optional] |
|
| 5. | In the TTL field, enter the connection time to live (TTL). The range is from 32 to 255 hops. |
|
| 6. | Save the policy. |