Cisco APIC Layer 3 Networking Configuration Guide, Release 6.2(x)

PDF

Cisco APIC Layer 3 Networking Configuration Guide, Release 6.2(x)

Apply a Route Map for Interleak Redistribution Using the GUI

Updated: April 17, 2026

Want to summarize with AI?

Log in

Applies a route control profile policy to customize the redistribution of OSPF, EIGRP, or static routes from a specific L3Out into MP-BGP.

Before you begin

Configure the tenant, VRF, L3Out, and route control profile policy.

Apply the route control profile policy to the L3Out from which the routes are redistributed.

Procedure

  1. On the menu bar, click Tenants.

  2. In the work pane, double-click the tenant-name tenant.

  3. In the navigation pane, expand tenant-name > Networking > L3Outs > L3Out-name.

  4. Click the Policy tab, and then click the Main tab.

    The properties for the L3Out appear in the work pane.

  5. For routes learned through OSPF or EIGRP, apply the route control profile policy:

    1. From the Route Profile for Interleak drop-down list, choose an existing route control profile policy or create one.
    2. Click Submit, and then click Submit Changes.

  6. For static routes, apply the route control profile policy:

    1. In the Route Profile for Redistribution area, click the + icon.
    2. From the Source drop-down list, choose static.
    3. Choose the route control profile policy to apply to the static routes.
    4. Click Update.
    5. Click Submit, and then click Submit Changes.

The route control profile policy is applied to the selected L3Out for interleak redistribution.