Use this procedure to configure offline in Cisco Optical Site Manager. Use it to complete the workflow and verify the result in the related Cisco Optical Site Manager page.
Use this task to configure offline.
Use this task to configure Offline Licensing Mode.
Before you begin
No prerequisites are documented in the source content.
Follow these steps to configure offline.
Procedure
-
Click Settings in the left panel, and then click Smart License.
-
Click the Configurationto expand it.
-
Under Transport Settings, select Transport Mode and then by selecting Offline from the drop-down list.
-
Check the Send Hostname check box to receive the hostname information.
-
Check the Send Product Version check box to receive the product version.
-
Click Apply to apply the settings.
-
Check Connection is disabled for Offline mode.
The configure offline task is complete.
What to do next
-
Click the Information tab to expand it.
-
Click the Save button, choose Trust Request.
-
trust-request XML file downloads.
-
Go to Cisco Smart Software Manager then go to Reports then click Usage Data Files then click Upload Usage Data and select the Virtual Account and click Ok.
-
Upload Usage Data window opens, click the Browse button and upload the trust-request file.
-
Check under the Reporting Status tab to see No Errors. It may take a few minuets to show No Errors. If it shows Errors, you have to fix them.
Establishing Trust - Cisco Optical Site Manager
-
Click Download under Acknowledgement tab.
-
In the Cisco Optical Site Manager click Import button,
it opens a Establish Trust window. -
Click Select files... and upload Ack_trust-request-xxxx click Open then click Upload.
-
Click Save, then Usage, it opens a Select what to save window, then choose any one option.
-
unreported
-
all
-
days
-
-
rum-report-xxx downloads
Establishing Trust - CSSM
-
In the CSSM, under Usage Data Files click Upload Usage Data.
-
It opens a Upload Usage Data window, click Browse and select rum-report-xxx click Open then click Upload Data In the Select Virtual Accounts window, select the appropriate account and click ok.
-
It may take a few minuets to show No Errors. If it shows Errors, you have to fix them.
-
When No Errors appears, Download the Ack_rum-report-xxx.
-
In the Cisco Optical Site Manager click Import button,
it opens Establish Trust click Select files.. and select Ack_rum-report-xxx click Open then click Done. -
Click the Refresh button to see updated information.
-
Configuration Verification
-
Under the Trust tab, you will see a Trust Established time, indicating that the trust has been established.
-
Under Reporting it displays ACK Report Time will be displayed.
-
Under License Usage, license count displays.
-
For the NCS 1010, the license count is based on the chassis, whereas for the NCS 1014, the license count is based on the number of line cards available on the Cisco Optical Site Manager application.