This chapter covers configuring devices in Cisco Optical Site Manager. Use it to find topics about add NCS 1000 devices, calculate device diagnostics, and SVO-LC device onboard in 25.1.1.
Create or edit an authorization group
Use this procedure to create or edit an authorization group in Cisco Optical Site Manager. It helps you complete the required configuration, verification, or management action and confirm the result.
Add a device
Use this procedure to add a device in Cisco Optical Site Manager. Cisco Optical Site Manager automatically detects and onboards directly connected peer devices on the network.
SVO-LC device onboard in R25.1.1
This section explains SVO-LC device onboard in R25.1.1. Each Cisco Optical Site Manager instance created in the SVO-LC supports on boarding both NCS 2000 and NCS 1000 devices.