Configuration Guide for Cisco Optical Site Manager, IOS XR Release 26.x.x

PDF

Configuration Guide for Cisco Optical Site Manager, IOS XR Release 26.x.x

Provision Pluggable Ports

Want to summarize with AI?

Log in

Use this procedure to provision Pluggable Ports in Cisco Optical Site Manager. Use it to complete the related configuration, verification, or management task and confirm the expected result.


Use this task to provision Pluggable Ports.

Use this task to provision the payloads supported on the card.

Before you begin

Follow these steps to provision Pluggable Ports:

Procedure

  1. Click the Provisioning > Pluggable Ports tabs.

  2. In the Pluggable Ports area, click the + button.

    The Create Port dialog box appears.

  3. Choose the port number from the Port ID drop-down list.

  4. Choose the supported payload from the Port Type drop-down list.

    Note
  5. Choose the number of lanes from the drop-down list.

    This field is visible only in specific configurations.

  6. Click Apply.

  7. Repeat Step 1 through Step 6 to configure the rest of the port rates as needed.

The provision Pluggable Ports is complete.