Use this procedure to download software package on device in Cisco Optical Site Manager. Use it to complete the workflow and verify the result in the related Cisco Optical Site Manager page.
Use this task to download software package on device.
Use this task to download the software package from the Cisco Optical Site Manager to NCS 1000 device.
Note
When you perform the download action targeting a device that hosts the Cisco Optical Site Manager application, you may see a message indicating that the software image is already present on the device. This is expected because the package is stored in the device’s local Cisco Optical Site Manager software repository. The download operation completes successfully without copying the package again.
Before you begin
Follow these steps to download software package on device.
Procedure
-
Click Software Manager from the left panel.
-
Click the Device Software section.
The following describes the fields displayed in the on the
Device Software section:
Table 1. Device Software Fields
|
Field
|
Description
|
|
Name
|
Displays the IP address of the device.
|
|
Component
|
Displays the platform component name.
|
|
App Status
|
Displays the status of the Cisco Optical Site Manager application on the device.
|
|
Working SW Version
|
Displays the currently active software version on the device.
|
|
Status
|
Displays the progress of the download.
|
-
Select the check boxes for one or more devices to download the new software.
Note
The Device Software tab lists the NCS 1000, cosm-primary, and cosm-secondary devices. Only the NCS 1000 IOS XR software package can be downloaded.
-
Click Download.
The Select Software Image dialog box appears.
-
Select the software package from the Software Image drop-down list.
-
Click Download.
The Status column displays the download progress.
Note
If the download fails, click the button next to the status to view the failure details.
-
(Optional) Click the Terminate Download button to terminate the software downloading on the selected device.
Note
When upgrading the software for the Cisco Optical Site Manager High Availability devices , select and upgrade all devices listed under Device Software.
The download software package on device task is complete.