Use this procedure to provision FPD upgrade for mr-mxp card in Cisco Optical Site Manager. You can view the running firmware version and the NCS 2000 package firmware version under the Maintenance FPD upgrade tabs.
Use this task to provision FPD upgrade for mr-mxp card.
|
Feature |
Release Information |
Description |
|---|---|---|
|
FPD Upgrade for MR-MXP Card |
Cisco NCS 2000 Release 12.3.1 |
The Cisco Optical Site Manager web interface now displays the running firmware information for the MR-MXP card. It also displays the latest available firmware for the NCS 2000 software release. You can compare and upgrade the firmware to the required release directly from Cisco Optical Site Manager. |
When the firmware version on the MR-MXP card is earlier than the NCS 2000 package firmware version, an alarm "TRAF-AFFECT-RESET-REQUIRED" is raised on that card in the Alarms tab.
You can view the running firmware version and the NCS 2000 package firmware version under the tabs.
Use this task to upgrade the MR-MXP card with the latest firmware released as part of the NCS 2000 software release.
Before you begin
Follow these steps to provision FPD upgrade for mr-mxp card.
Procedure
The provision FPD upgrade for mr-mxp card task is complete.