Use this procedure to download GISO image in Cisco Optical Site Manager. Download the necessary GISO image from the Cisco repository to the Cisco Optical Site Manager.
Use this task to download GISO image.
Before
Download the necessary GISO image from the Cisco repository to the Cisco Optical Site Manager.
Note
For R25.3.1, when performing a software download on the Cisco NCS 1004 device, use a Golden ISO (GISO) image that excludes the Cisco Optical Site Manager rpm file. Including the Cisco Optical Site Manager rpm file increases the GISO size, which may exceed the available disk space and cause the software upgrade to fail.
Procedure
-
Click Software Manager from the left panel.
-
Click the Download tab.
-
Select SFTP from the Protocol drop-down list.
-
Enter the path of the software package file in the Remote File Path field.
-
Choose to enter the credentials either through User-Password or Auth-Group.
- If you choose User-Password, enter the Username and Password in the given fields.
- If you choose Auth-Group, choose the authentication group from the Auth Group drop-down list.
-
Click Download to download the software package.
The download status is displayed in the Status column.
-
Click the Refresh icon in the Software Packages section.
The downloaded software package ID is displayed in the Software Packages list in the increasing order of their release.
The software package is downloaded and listed in the Software Packages section.