Configuration Guide for Cisco Optical Site Manager, IOS XR Release 26.x.x

PDF

Configuration Guide for Cisco Optical Site Manager, IOS XR Release 26.x.x

Activate Cisco Optical Site Manager and admin plane image for the SVO-lc

Updated: October 14, 2026

Want to summarize with AI?

Log in

Use this procedure to activate Cisco Optical Site Manager and admin plane image for the SVO-LC. Use it to complete the workflow and verify the result in the related Cisco Optical Site Manager page.

Use this task to activate Cisco Optical Site Manager and admin plane image for the SVO-lc.

Use this task to upgrade OS, activate Cisco Optical Site Manager and Admin Plane image for the SVO-LC.

Before you begin

Follow these steps to activate Cisco Optical Site Manager and admin plane image for the SVO-lc.

Procedure

  1. Click Software Manager from the left panel.

  2. Click the Device Software section.

  3. Select the CardController or OS component to be activated, and click Activate.

    Note

    The activation for the CardController and OS components is only applicable to SVO-LC. If both SVO-LC cards are present (local HA configuration), you must update the OS component on both cards. An error occurs if you select only the Active card for the update.

    Caution

    As the SVO-LC host multiple Cisco Optical Site Manager applications, the OS upgrade affects all active instances on the card being upgraded, temporarily resulting in a loss of manageability.

  4. To activate the Cisco Optical Site Manager and Cisco Optical Site Manager Admin Plane instance, perform these steps in the Software and Admin Plane Software sections.

    1. Click the Activate button.
      The Software Image Activation dialog box is displayed.
    2. Select the software image you want to activate from the drop-down list and click Activate.
    Note

    It is recommended to activate the Administrative Plane Software first, before activating other components in the system.

Note

If the activation fails, click the button next to the status to view the failure details.

The activate Cisco Optical Site Manager and admin plane image for the SVO-lc task is complete.