Use this procedure to view node details in Cisco Optical Site Manager. The details of a node can be viewed from the right-panel, including the list of nodes, active circuits, and physical connections.
Use this task to view node details.
The details of a node can be viewed from the right-panel, including the list of nodes, active circuits, and physical connections.
Procedure
The following table describes the details of the sections on the right-panel.
|
Section |
Description |
|---|---|
|
Side List |
Displays a list of the nodes along with its details, such as span loss value, the IP address of the device it is connected to, and its degree. |
|
OXC List |
Displays a list of active circuits passing through a particular card. For more details, see View active circuit list. |
|
Connection Verification |
Displays a list of the connections between the line cards and all passive modules. For more details, see Connection verification. |