The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
•Prerequisites for Using Click to Call
•Configuring Click to Call Preferences
•Selecting the Phone to Use with Click to Call
•Switching to a Different Phone Before a Call
•Setting Up Dialing Rules for International Calls
•How To Enable or Disable the Click to Call Plug-In Manually
Click to Call works with the following applications, which you can access directly from your Windows-based computer or using Citrix XenApp:
•Browsers—Internet Explorer and Mozilla Firefox
•Microsoft applications—Microsoft Word, Excel, PowerPoint, Outlook, and SharePoint
However, to add Click to Call functionality to an application:
•The application must be a version that Click to Call supports. Verify the supported versions with your system administrator.
•You must install the application before you install Click to Call. If you update an application, you must reinstall Click to Call.
•If you perform a custom installation of Click to Call, you must select the application during installation.
Related Topics
•Troubleshooting Click to Call, page 3-7
Verify with your administrator to ensure that your system meets the requirements for using Click to Call.
Before You Begin
•Windows users—You must have Administrator privileges and at least 80MB of free disk space on your computer to install the application.
•Citrix users—You do not need to install Click to Call. Your system administrator completes the configuration that enables you to use Click to Call from Citrix XenApp. If your system administrator suggests that you also install Click to Call on your computer, follow the steps in the next procedure.
Procedure
Step 1 Obtain the installer (.exe file) and the applicable set-up instructions from your system administrator.
Step 2 Double-click the installer, and follow the onscreen prompts.
Tip If you need to reinstall Click to Call for a specific application after updating the application, select the Custom option and choose the application.
Related Topics
•Configuring Click to Call Preferences.
•Troubleshooting Click to Call, page 3-7
Click to Call requires your Cisco Unified Communications Manager account information to work. Click to Call stores these settings so that you do not have to re-enter them each time you run the application.
Before You Begin
Obtain your Cisco Unified Communications Manager account information from your system administrator, if you do not already have it.
Procedure
Step 1 Open the Click to Call Preferences dialog box:
–Windows users—Select Start > All Programs > Cisco Click to Call > Click to Call Configuration.
–Citrix users—Sign into Citrix XenApp and select Click to Call Configuration. If this application is unavailable, your system administrator already configured it for you.
Step 2 Enter your Cisco Unified Communications Manager username in User Name, if blank.
Step 3 Enter your Cisco Unified Communications Manager password in Password, if blank.
Step 4 Select more options.
Step 5 If WebDialer Service or CCMCIP Service are blank, follow the instructions provided by your administrator to enter the applicable information.
Step 6 Select Save.
Related Topics
•Selecting the Phone to Use with Click to Call.
•Troubleshooting Click to Call, page 3-7
You can open Click to Call and leave it active in your Windows taskbar for easy access.
Procedure
Step 1 Start Click to Call using one of these methods:
–Windows users—Select Start > All Programs > Cisco Click to Call > Click to Call Configuration to start the application.
–Citrix users—Sign into Citrix XenApp and select Click to Call Configuration to start the application. However, depending on your configuration, your system might prevent Click to Call from remaining active in the Windows taskbar.
Step 2 Verify that the Click to Call icon appears in the Windows taskbar.
Step 3 Once started, right-click in your Windows taskbar to access Click to Call.
Related Topics.
•Troubleshooting Click to Call, page 3-7
When you sign in to Click to Call, it automatically finds your Cisco Unified IP Phones and Cisco IP Communicator and allows you to select which phone to use. If you do not see the phone that you want to use, verify with your system administrator that your phone supports Click to Call.
You cannot use Click to Call with the following applications:
•Cisco Unified Personal Communicator
•Cisco Unified Communications Integration for Cisco WebEx Connect
•Cisco Unified Communications Integration for Microsoft Office Communicator. While you cannot install the Click to Call and Cisco Unified Communications Integration for Microsoft Office Communicator applications separately, Click to Call is installed as part of Cisco Unified Communications Integration for Microsoft Office Communicator and can be used in that way.
Click to Call typically stores your phone preferences so that you do not have to re-enter them each time you restart Click to Call. If you access Click to Call using Citrix XenApp, you might need to re-enter these settings, depending on how your system administrator configures your Citrix account.
Procedure
Step 1 Open the Click to Call Preferences dialog box:
–Windows users—Select Start > All Programs > Cisco Click to Call > Click to Call Configuration.
–Citrix users—Sign into Citrix XenApp and select Click to Call Configuration. If this application is unavailable, your system administrator already configured it for you.
Step 2 Select the Phones tab on the Click to Call Preferences dialog box.
Step 3 Select the phone that you want to use to make calls using Click to Call.
Step 4 (Optional) Update the Alias fields with names for your phones that are easy to recognize, such as "Home" and "Office".
Step 5 Select Save.
Related Topics
•Configuring Click to Call Preferences
•Troubleshooting Click to Call, page 3-7.
You can change the phone that Click to Call uses at any time. Click to Call uses the new phone the next time you place a call.
Procedure
Step 1 Right-click in your Windows taskbar to access the Click to Call menu.
Step 2 Select Select Phone, and choose the phone that you want to use.
Related Topics
•Configuring Click to Call Preferences
•Troubleshooting Click to Call, page 3-7.
International phone numbers are often written with a plus sign (+) before the phone number representing the international access code.
If your system administrator does not configure the dialing rules, you can set them up to make it easier to call international numbers. When you set up dialing rules, Click to Call automatically substitutes the plus (+) sign with the correct prefix, including your outside line access number, if applicable.
Procedure
Step 1 Open the Click to Call Preferences dialog box:
–Windows users—Select Start > All Programs > Cisco Click to Call > Click to Call Configuration.
–Citrix users—Sign into Citrix XenApp and select Click to Call Configuration. If this application is unavailable, your system administrator already configured it for you.
Step 2 Select the Dialing Rules tab on the Click to Call Preferences dialog box.
Step 3 Enter the code required to dial numbers outside of your organization. For example, your organization may require you to dial "9" to access an outside line.
Step 4 Enter the code required to dial outside of the country. For example, to make calls from the United States, enter "011".
Step 5 Select Save.
Related Topics
•Configuring Click to Call Preferences
•Troubleshooting Click to Call, page 3-7.
You can manually enable or disable the Click to Call plug-in in the Microsoft Office and Mozilla Firefox applications independently. For example, if you disable the plug-in in Microsoft Word, the plug-in can still be enabled in Microsoft Excel.
Note You can manually enable and disable the Click to Call plug-in Microsoft Office 2007 or Office 2010 only.
•Enabling or Disabling the Plug-In in Microsoft Outlook 2007 or Later
•Enabling or Disabling the Plug-In in Mozilla Firefox
Procedure
Step 1 Start Microsoft Word, Excel, or Powerpoint 2007 or later.
Step 2 Select the Microsoft Office button, then select Word Options, Excel Options, or PowerPoint Options, as appropriate.
Step 3 Select Add-Ins in the left pane of the Word Options dialog box.
Step 4 Select COM Add-Ins from the Manage drop-down list, then select Go.
Step 5 Check or uncheck the Cisco.ClickToCall.ApplicationName check box to enable or disable the plug-in, where ApplicationName is the name of the supported application.
Step 6 Select OK.
Related Topics
•Enabling or Disabling the Plug-In in Microsoft Outlook 2007 or Later
•Enabling or Disabling the Plug-In in Mozilla Firefox
Procedure
Step 1 Start Microsoft Outlook 2007 or later.
Step 2 Select Tools > Trust Center.
Step 3 Select Add-Ins in the left pane of the Trust Center dialog box.
Step 4 Select COM Add-Ins from the Manage drop-down list, then select Go.
Step 5 Check or uncheck the Cisco.ClickToCall.Outlook check box to enable or disable the plug-in.
Step 6 Select OK.
Related Topics
•Enabling or Disabling the Plug-In in Mozilla Firefox
Procedure
Step 1 Start Mozilla Firefox.
Step 2 Select Tools > Add-ons.
Step 3 Select Extensions in the Add-ons dialog box.
Step 4 Select the Cisco Click to Call plug-in and select Enable or Disable.
Step 5 Close the Add-ons dialog box.
Step 6 Restart Mozilla Firefox.
Related Topics
•Enabling or Disabling the Plug-In in Microsoft Outlook 2007 or Later