Cisco Security Cloud Control: Secure Firewall Management

PDF

Cisco Security Cloud Control: Secure Firewall Management

Onboard a Firewall Threat Defense Device to Cloud-Delivered Firewall Management Center using Zero-Touch Provisioning

Updated: September 24, 2026

Want to summarize with AI?

Log in

Learn how to onboard a Firewall Threat Defense device to Cloud-Delivered Firewall Management Center using Zero-Touch Provisioning, including tenant requirements, supported devices, serial number registration, policy assignment, licensing, and post-onboarding actions.

Only the Firepower 1000, Firepower 2100, Secure Firewall 1200, and Secure Firewall 3100 devices can be onboarded with the zero-touch provisioning method.

Before you begin

Confirm that the following is completed before onboarding:

  • You have a Security Cloud Control tenant. If you do not, see Request a Security Cloud Control Tenant for more information.

  • Cloud-Delivered Firewall Management Center is enabled for your tenant.

  • The device is freshly installed but has never been logged into by either the device CLI, a Firewall Management Center, or the Firewall Device Manager.

  • The device is running version 7.2 or later.

  • The device's outside or management interface should be able to access the Security Services Exchange domain registration.us.sse.itd.cisco.com.

Procedure

  1. In the left pane, click Security Devices.

  2. Click Onboard device or service () icon.

  3. Click the FTD tile.

  4. Under Management Mode, select FTD. By selecting FTD under Management Mode, you will not be able to manage the device using the previous management platform. All existing policy configurations except for interface configurations will be reset. You must re-configure policies after you onboard the device.

    Note

    If you are using the 90-day Evaluation License, the number of days left is listed under the FTD and FDM toggle options. Click the Manage Subscription License link to opt into a full subscription license. See Managed Device Licensing Types for more information.

  5. Click the Use Serial Number tile.

  6. Select Cloud-Delivered Firewall Management Center from the drop-down list. Click Next.

    For information on onboarding a threat defense device to On-Prem Firewall Management Center, see Onboard a Threat Defense Device to On-Prem Firewall Management Center using Zero-Touch Provisioning.

  7. Enter the Device Serial Number and the Device Name. Select Next.

  8. Choose an option depending on whether the device is logged into and configured for a manager:

    • If your device is brand new and has never been configured for a manager, click Yes, this new device has never been logged into or configured for a manager.

    • If your device has been previously registered for a manager or is still registered to a manager, click No, this device has been logged into and configured for a manager.

  9. Click Next.

  10. In the Policy Assignment step, use the drop-down menu to select an access control policy to deploy once the device is onboarded. If you have no policies configured, select the Default Access Control Policy.

  11. Select the subscription licenses you want to apply to the device. Click Next.

  12. Once the device is synchronized, select the device you just onboarded from the Security Devices page and select any of the options listed under the Device Management pane located to the right. We strongly recommend these actions:

    • If you did not already, create a custom access control policy to customize the security for your environment.

      For more information, see Access Control Overview.

    • You can enable Cisco Security Analytics and Logging to view events in the Security Cloud Control dashboard, or register the device to a Secure Firewall Management Center for security analytics.

      For more information, see Cisco Security Analytics and Logging.