Explains how internode topologies enable automatic discovery and communication between network nodes, supporting efficient configuration and real-time network updates.
| Feature Name |
Release Information |
Feature Description |
|---|---|---|
| Automatic topology discovery |
Cisco IOS XR Release 25.1.1 |
NCS 1014 now supports topology discovery using the OSC links created through the EDFA2 card. To establish the OSC link between two nodes, you need to configure the OSC pluggable to be operational and the OSPFv2 protocol on both the near-end and far-end nodes. By connecting the NCS 1014 to OSPF networks, the NCS 1014 network information is automatically communicated across multiple nodes. |
NCS 1014 link topology discovery
This section explains how NCS 1014 devices use OSPF and OSC channels to perform automatic network topology discovery and communicate network information across multiple networks.
Configure OSPF on the nodes for automatic topology discovery
Use this procedure to configure OSPFv2 on the near end and far end nodes to enable automatic topology discovery.