This section provides host-interface and trunk parameters for additional AppSel codes supported by the DP04QSDD-ULH-A1 pluggable on the QXP card.
Use this information to select an AppSel code that delivers the required host interface, baud rate, modulation type, and chromatic dispersion range.
From Release 26.3.1, the QXP card supports these additional AppSel codes for the DP04QSDD-ULH-A1 pluggable.
|
AppSel code |
Host interface |
Host code |
Media code |
Baud rate (GBd) |
Modulation |
Minimum CD (ps/nm) |
Maximum CD (ps/nm) |
|---|---|---|---|---|---|---|---|
|
3 |
100GAUI-2 |
13 |
100 |
118.2 |
QPSK |
-58000 |
58000 |
|
6 |
100GAUI-2 |
13 |
216 |
97.9 |
PCS |
-35000 |
35000 |
|
9 |
100GAUI-2 |
13 |
201 |
87.4 |
PCS |
-52000 |
52000 |
|
12 |
100GAUI-2 |
13 |
194 |
75 |
PCS |
-37000 |
37000 |
|
15 |
100GAUI-2 |
13 |
192 |
65.7 |
PCS |
-42000 |
42000 |
|
16 |
400GAUI-8 |
17 |
198 |
60.1 |
16QAM |
-23000 |
23000 |
|
18 |
100GAUI-2 |
13 |
198 |
60.1 |
16QAM |
-23000 |
23000 |
|
19 |
400GAUI-8 |
17 |
70 |
60.1 |
16QAM |
-23000 |
23000 |
|
21 |
100GAUI-2 |
13 |
70 |
60.1 |
16QAM |
-23000 |
23000 |
|
24 |
100GAUI-2 |
13 |
54 |
60.1 |
16QAM |
-23000 |
23000 |
|
29 |
100GAUI-2 |
13 |
92 |
60.1 |
QPSK |
-58000 |
58000 |
AppSel code 29 supports only the 2x100GE operating mode.