Configuration Guide for Cisco NCS 1014, IOS XR Releases 26.x.x
Is this content helpful?
Thank you for your feedback. Your response has been recorded.
AI responses are currently only available to logged in users. Log in
Important. Results generated by AI. Before using results, verify accuracy and completeness.
Only ask questions about this document. To ask questions about this product as a whole, go to Technical Documentation .
Suggestions
Sorry, we couldn't generate a response for this query.
Launch error. Something went wrong. Please try again.
Configuration Guide for Cisco NCS 1014, IOS XR Releases 26.x.x
Updated: June 18, 2026
Want to summarize with AI?
Log inImportant. Results generated by AI. Before using results, verify accuracy and completeness.
This section explains how coherent probes function as link probes and are supported on EDFA2 cards across all C-band channels.
The DP01QSDD-ZT5-A1 and DP04QSDD-E26-A1 QDD, a coherent probe that is QSFP-DD MSA-compliant and supported on the EDFA2 card, can be used as a link probe and supports all the C-band channels.
The coherent probe on the NCS1K14-EDFA2 card is provided as optics port 7.
Need help?
(Requires a Cisco Service Contract)
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.