Maps traffic from a FC/FCoE server interface to a FC/FCoE external interface configured in NP mode.
This procedure maps traffic coming from a FC/FCoE server (host) interface to a FC/FCoE external (uplink) interface configured in NP mode.
Before you begin
All server interfaces must be F ports and all uplink interfaces must be NP ports.
Procedure
Configure the NPV traffic map using the following commands:
Example:
apic1(config)#
leaf 101
apic1(config-leaf)#
npv traffic-map server-interface \
{ vfc <slot/port> | vfc-po <po-name> |fc <slot/port> } \
label <name> tenant <tn> app <ap> epg <ep>
apic1(config-leaf)#
npv traffic-map external-interface \
{ vfc <slot/port> | vfc-po <po-name> |fc <slot/port> } \
tenant <tn> label <name>
apic1(config)#
leaf 101
apic1(config-leaf)#
npv traffic-map server-interface vfc 1/1 label serv1 tenant t1 app ap1 epg epg1
apic1(config-leaf)#
npv traffic-map external-interface vfc-po my-fc-pc tenant t1 label ext1